在测试TI下dsplib库出现如下警告的解决方案
在测试TI下dsplib库出现如下警告
warning #10349-D: creating output section ".fardata" without a SECTIONS specification. For additional information on this section, please see the 'C6000 EABI Migration' guide at http://processors.wiki.ti.com/index.php/C6000_EABI:C6000_EABI_Migration#C6x_EABI_Sections
warning #10349-D: creating output section ".neardata" without a SECTIONS specification. For additional information on this section, please see the 'C6000 EABI Migration' guide at http://processors.wiki.ti.com/index.php/C6000_EABI:C6000_EABI_Migration#C6x_EABI_Sections
warning #10349-D: creating output section ".rodata" without a SECTIONS specification. For additional information on this section, please see the 'C6000 EABI Migration' guide at http://processors.wiki.ti.com/index.php/C6000_EABI:C6000_EABI_Migration#C6x_EABI_Sections
warning #10321-D: creating group "NEARDP_DATA" to co-locate output sections .neardata and .rodata with .bss
解决方案:https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/92716
按照图中方法改写cmd文件即可解决警告问题,在SECTIONS段添加如下代码:
.rodata :>IRAM
.fardata :>IRAM
本文地址:https://blog.csdn.net/qq_33169689/article/details/107916195