在测试TI下dsplib库出现如下警告的解决方案

在测试TI下dsplib库出现如下警告

warning #10349-D: creating output section ".fardata" without a SECTIONS specification.  For additional information on this section, please see the 'C6000 EABI Migration' guide at http://processors.wiki.ti.com/index.php/C6000_EABI:C6000_EABI_Migration#C6x_EABI_Sections

warning #10349-D: creating output section ".neardata" without a SECTIONS specification.  For additional information on this section, please see the 'C6000 EABI Migration' guide at http://processors.wiki.ti.com/index.php/C6000_EABI:C6000_EABI_Migration#C6x_EABI_Sections

warning #10349-D: creating output section ".rodata" without a SECTIONS specification.  For additional information on this section, please see the 'C6000 EABI Migration' guide at http://processors.wiki.ti.com/index.php/C6000_EABI:C6000_EABI_Migration#C6x_EABI_Sections

warning #10321-D: creating group "NEARDP_DATA" to co-locate output sections .neardata and .rodata with .bss

解决方案：https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/92716

按照图中方法改写cmd文件即可解决警告问题，在SECTIONS段添加如下代码：

.rodata		:>IRAM
.fardata	:>IRAM 

本文地址：https://blog.csdn.net/qq_33169689/article/details/107916195