欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  科技

CentOS6.3 KVM如何设置网卡为桥接模式

程序员文章站 2022-03-16 20:28:47
KVM的默认网络模式为NAT,就是说借助宿主机模式上网,现在我们想改成桥接模式,这样外界就可以直接和宿主机里的虚拟机通讯了,本文将介绍此方法的实现... 12-11-28...
kvm的默认网络模式为nat,就是说借助宿主机模式上网,现在我们想改成桥接模式,这样外界就可以直接和宿主机里的虚拟机通讯了。
1,首先看一下默认的网络设置

复制代码
代码如下:

# cat /etc/libvirt/qemu/networks/default.xml
<network>
<name>default</name>
<uuid>1f118032-0345-4725-adcf-6b94f6aca19c</uuid>
<bridge name="virbr0" />
<mac address='52:54:00:f1:6b:6e'/>
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
</dhcp>
</ip>
</network>

2,再看一下虚拟机配置文件里面的网络设置
#cat /etc/libvirt/qemu/ubuntu10.04.xml
<!--
warning: this is an auto-generated file. changes to it are likely to be
overwritten and lost. changes to this xml configuration should be made using:
virsh edit ubuntu10.04
or other application using the libvirt api.
-->
<domain type='kvm'>
<name>ubuntu10.04</name>
<uuid>2eeb1395-39a2-a169-4da3-f22b20a1d34f</uuid>
<memory unit='kib'>1048576</memory>
<currentmemory unit='kib'>1048576</currentmemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='x86_64' machine='rhel6.3.0'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/libexec/qemu-kvm</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source file='/var/lib/libvirt/images/ubuntu10.04.img'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</disk>
<disk type='block' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hdc' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='1' target='0' unit='0'/>
</disk>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<interface type='bridge'> 原来是interface type='default'
<mac address='52:54:00:50:58:7e'/>
<source bridge='br1'/> 原来是source network='default',这里的br1要根据你的物理网卡下面有讲
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes'/>
<sound model='ich6'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</sound>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</memballoon>
</devices>
</domain>
[/code]
3,改完之后要更新一下配置文件
# virsh define ubuntu10.04.xml
定义域 ubuntu10.04(从 ubuntu10.04.xml)
#然后就可以virsh start ubuntu10.04了,不过现在物理网卡这块还没有改好
4,物理网卡可以手动更改,不过现在有现成的工具包,可以用这个更改
#wget http://www.convirture.com/downloads/convirture-tools/2.0.1/convirture-tools-2.0.1.tar.gz
# tar zxvf convirture-tools-2.0.1.tar.gz
# /root/convirture-tools/install/managed_server/scripts/convirt-tool --bridge setup
我的这里出现了点小问题,发现网络没起来,所以不要远程来做这个操作,主要原因是里面的配置文件有点需要
小的更改,我的是uuid注释了。
# ls ifcfg-*
ifcfg-br1 ifcfg-br2 ifcfg-br3 ifcfg-br4 ifcfg-em1 ifcfg-em2 ifcfg-em3 ifcfg-em4 ifcfg-lo
我这里有四个物理网卡,所以生成了四个bridge,不过真实用的只有br1
这个工具好有一个好处就是保存了原配置文件,如果你不想用时还可以还原
# ls saved.ifcfg-em*
saved.ifcfg-em1.20121128.101114 saved.ifcfg-em3.20121128.101114
saved.ifcfg-em2.20121128.101114 saved.ifcfg-em4.20121128.101114
看下ifceg-em1
# cat ifcfg-em1
device="em1"
#bootproto=none
nm_controlled="yes"
onboot=yes
type="ethernet"
#uuid="3bc7fdcc-42b1-4223-b202-e697305897c8"
#ipaddr172.16.10.81
prefix=24
gateway=172.16.10.254
dns1=172.16.10.5
defroute=yes
ipv4_failure_fatal=yes
ipv6init=no
name="system em1"
hwaddr=90:b1:1c:20:4d:a5
bridge=br1
看下ifcfg-br1
# cat ifcfg-br1
device="br1"
bootproto=none
nm_controlled="yes"
onboot=yes
#uuid="3bc7fdcc-42b1-4223-b202-e697305897c8"
ipaddr=172.16.10.81
prefix=24
gateway=172.16.10.254
dns1=172.16.10.5
defroute=yes
ipv4_failure_fatal=yes
ipv6init=no
name="system br1"
type=bridge
最后看下网卡
# ifconfig
br1 link encap:ethernet hwaddr 90:b1:1c:20:4d:a5
inet addr:172.16.10.81 bcast:172.16.10.255 mask:255.255.255.0
inet6 addr: fe80::92b1:1cff:fe20:4da5/64 scope:link
up broadcast running multicast mtu:1500 metric:1
rx packets:10219 errors:0 dropped:0 overruns:0 frame:0
tx packets:3776 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
rx bytes:576031 (562.5 kib) tx bytes:15928008 (15.1 mib)
em1 link encap:ethernet hwaddr 90:b1:1c:20:4d:a5
inet6 addr: fe80::92b1:1cff:fe20:4da5/64 scope:link
up broadcast running multicast mtu:1500 metric:1
rx packets:10362 errors:0 dropped:0 overruns:0 frame:0
tx packets:13131 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
rx bytes:766684 (748.7 kib) tx bytes:16489098 (15.7 mib)
interrupt:35
lo link encap:local loopback
inet addr:127.0.0.1 mask:255.0.0.0
inet6 addr: ::1/128 scope:host
up loopback running mtu:16436 metric:1
rx packets:144411 errors:0 dropped:0 overruns:0 frame:0
tx packets:144411 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
rx bytes:147381248 (140.5 mib) tx bytes:147381248 (140.5 mib)
virbr0 link encap:ethernet hwaddr 52:54:00:f1:6b:6e
inet addr:192.168.122.1 bcast:192.168.122.255 mask:255.255.255.0
up broadcast running multicast mtu:1500 metric:1
rx packets:2028 errors:0 dropped:0 overruns:0 frame:0
tx packets:1135 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
rx bytes:233311 (227.8 kib) tx bytes:89372 (87.2 kib)
vnet0 link encap:ethernet hwaddr fe:54:00:50:58:7e
inet6 addr: fe80::fc54:ff:fe50:587e/64 scope:link
up broadcast running multicast mtu:1500 metric:1
rx packets:161 errors:0 dropped:0 overruns:0 frame:0
tx packets:3117 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
rx bytes:15533 (15.1 kib) tx bytes:263947 (257.7 kib)
vnet1 link encap:ethernet hwaddr fe:54:00:b5:1a:19
inet6 addr: fe80::fc54:ff:feb5:1a19/64 scope:link
up broadcast running multicast mtu:1500 metric:1
rx packets:56 errors:0 dropped:0 overruns:0 frame:0
tx packets:794 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
rx bytes:8754 (8.5 kib) tx bytes:42245 (41.2 kib)
5,启动虚拟机ubuntu10.04后配置网卡
#cat /etc/network/interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 172.16.10.100
netmask 255.255.255.0
gateway 172.16.10.254
#/etc/init.d/networking restart
启动即可