Getting Started with MongoDB and Java: Part II

By Trisha Gee, Java Engineer and Advocate at MongoDB In the last article, we covered the basics of installing and connecting to MongoDB via a Java application. In this post, Ill give an introduction to CRUD (Create, Read, Update, Delete) o

By Trisha Gee, Java Engineer and Advocate at MongoDB

In the last article, we covered the basics of installing and connecting to MongoDB via a Java application. In this post, I’ll give an introduction to CRUD (Create, Read, Update, Delete) operations using the Java driver. As in the previous article, if you want to follow along and code as we go, you can use these tips to get the tests in the Getting Started project to go green.

Creating documents

In the last article, we introduced documents and how to create them from Java and insert them into MongoDB, so I’m not going to repeat that here. But if you want a reminder, or simply want to skip to playing with the code, you can take a look at Exercise3InsertTest.

Querying

Putting stuff in the database is all well and good, but you’ll probably want to query the database to get data from it.

In the last article we covered some basics on using find() to get data from the database. We also showed an example in Exercise4RetrieveTest. But MongoDB supports more than simply getting a single document by ID or getting all the documents in a collection. As I mentioned, you can query by example, building up a query document that looks a similar shape to the one you want.

For the following examples I’m going to assume a document which looks something like this:

person = {
  _id: "anId",
  name: "A Name",
  address: {
    street: "Street Address",
    city: "City",
    phone: "12345"
  }
  books: [ 27464, 747854, ...]
}  

Find a document by ID

To recap, you can easily get a document back from the database using the unique ID:

…and you get the values out of the document (represented as a DBObject) using a Map-like syntax:

In the above example, because you’ve queried by ID (and you knew that ID existed), you can be sure that the cursor has a single document that matches the query. Therefore you can use cursor.one() to get it.

Find all documents matching some criteria

In the real world, you won’t always know the ID of the document you want. You could be looking for all the people with a particular name, for example.

In this case, you can create a query document that has the criteria you want:

You can find out the number of results:

and you can, naturally, iterate over them:

A note on batching

The cursor will fetch results in batches from the database, so if you run a query that matches a lot of documents, you don’t have to worry that every document is loaded into memory immediately. For most queries, the first batch returned will be 101 documents. But as you iterate over the cursor, the driver will automatically fetch further batches from the server. So you don’t have to worry about managing batching in your application. But you do need to be aware that if you iterate over the whole of the cursor (for example to put it into a List), you will end up fetching all the results and putting them in memory.

You can get started with Exercise5SimpleQueryTest.

Selecting Fields

Generally speaking, you will read entire documents from MongoDB most of the time. However, you can choose to return just the fields that you care about (for example, you might have a large document and not need all the values). You do this by passing a second parameter into the find method that’s another DBObject defining the fields you want to return. In this example, we’ll search for people called “Smith”, and return only the name field. To do this we pass in a DBObject representing {name: 1}:

You can also use this method to exclude fields from the results. Maybe we might want to exclude an unnecessary subdocument from the results - let’s say we want to find everyone called “Smith”, but we don’t want to return the address. We do this by passing in a zero for this field name, i.e. {address: 0}:

With this information, you’re ready to tackle Exercise6SelectFieldsTest

Query Operators

As I mentioned in the previous article, your fields can be one of a number of types, including numeric. This means that you can do queries for numeric values as well. Let’s assume, for example, that our person has a numberOfOrders field, and we wanted to find everyone who had ordered more than, let’s say, 10 items. You can do this using the $gt operator:

Note that you have to create a further subdocument containing the $gt condition to use this operator. All of the query operators are documented, and work in a similar way to this example.

You might be wondering what terrible things could happen if you try to perform some sort of numeric comparison on a field that is a String, since the database supports any type of value in any of the fields (and in Java the values are Objects so you don’t get the benefit of type safety). So, what happens if you do this?

The answer is you get zero results (assuming all your documents contain names that are Strings), and you don’t get any errors. The flexible nature of the document schema allows you to mix and match types and query without error.

You can use this technique to get the test in Exercise7QueryOperatorsTest to go green - it’s a bit of a daft example, but you get the idea.

Querying Subdocuments

So far we’ve assumed that we only want to query values in our top-level fields. However, we might want to query for values in a subdocument - for example, with our person document, we might want to find everyone who lives in the same city. We can use dot notation like this:

We’re not going to use this technique in a query test, but we will use it later when we’re doing updates.

Familiar methods

I mentioned earlier that you can iterate over a cursor, and that the driver will fetch results in batches. However, you can also use the familiar-looking skip() and limit() methods. You can use these to fix up the test in Exercise8SkipAndLimitTest.

A last note on querying: Indexes

Like a traditional database, you can add indexes onto the database to improve the speed of regular queries. There’s extensive documentation on indexes which you can read at your own leisure. However, it is worth pointing out that, if necessary, you can programmatically create indexes via the Java driver, using createIndexes. For example:

There is a very simple example for creating an index in Exercise9IndexTest, but indexes are a full topic on their own, and the purpose of this part of the tutorial is to merely make you aware of their existence rather than provide a comprehensive tutorial on their purpose and uses.

Updating values

Now you can insert into and read from the database. But your data is probably not static, especially as one of the benefits of MongoDB is a flexible schema that can evolve with your needs over time.

In order to update values in the database, you’ll have to define the query criteria that states which document(s) you want to update, and you’ll have to pass in the document that represents the updates you want to make.

There are a few things to be aware of when you’re updating documents in MongoDB, once you understand these it’s as simple as everything else we’ve seen so far.

Firstly, by default only the first document that matches the query criteria is updated.

Secondly, if you pass in a document as the value to update to, this new document will replace the whole existing document. If you think about it, the common use-case will be: you retrieve something from the database; you modify it based on some criteria from your application or the user; then you save the updated document to the database.

I’ll show the various types of updates (and point you to the code in the test class) to walk you through these different cases.

Simple Update: Find a document and replace it with an updated one

We’ll carry on using our simple Person document for our examples. Let’s assume we’ve got a document in our database that looks like:

person = {
  _id: "jo",
  name: "Jo Bloggs",
  address: {
    street: "123 Fake St",
    city: "Faketon",
    phone: "5559991234"
  }
  books: [ 27464, 747854, ...]
} 

Maybe Jo goes into witness protection and needs to change his/her name. Assuming we’ve got jo populated in a DBObject, we can make the appropriate changes to the document and save it into the database:

You can make a start with Exercise10UpdateByReplacementTest.

Update Operators: Change a field

But sometimes you won’t have the whole document to replace the old one, sometimes you just want to update a single field in whichever document matched your criteria.

Let’s imagine that we only want to change Jo’s phone number, and we don’t have a DBObject with all of Jo’s details but we do have the ID of the document. If we use the $set operator, we’ll replace only the field we want to change:

There are a number of other operators for performing updates on documents, for example $inc which will increment a numeric field by a given amount.

Now you can do Exercise11UpdateAFieldTest

Update Multiple

As I mentioned earlier, by default the update operation updates the first document it finds and no more. You can, however, set the multi flag on update to update everything.

So maybe we want to update everyone in the database to have a country field, and for now we’re going to assume all the current people are in the UK:

The query parameter is an empty document which finds everything; the second boolean (set to true) is the flag that says to update all the values which were found.

Now we’ve learnt enough to complete the two tests in Exercise12UpdateMultipleDocumentsTest

Upsert

Finally, the last thing to mention when updating documents is Upsert (Update-or-Insert). This will search for a document matching the criteria and either: update it if it’s there; or insert it into the database if it wasn’t.

Like “update multiple”, you define an upsert operation with a magic boolean. It shouldn’t come as a surprise to find it’s the first boolean param in the update statement (since “multi” was the second):

Now you know everything you need to complete the test in Exercise13UpsertTest

Removing from the database

Finally the D in CRUD - Delete. The syntax of a remove should look familiar now we’ve got this far, you pass a document that represents your selection criteria into the remove method. So if we wanted to delete jo from our database, we’d do:

Unlike update, if the query matches more than one document, all those documents will be deleted (something to be aware of!). If we wanted to remove everyone who lives in London, we’d need to do:

That’s all there is to remove, you’re ready to finish off Exercise14RemoveTest

Conclusion

Unlike traditional databases, you don’t create SQL queries in MongoDB to perform CRUD operations. Instead, operations are done by constructing documents both to query the database, and to define the operations to perform.

While we’ve covered what the basics look like in Java, there’s loads more documentation on all the core concepts in the MongoDB documentation:

• Query Documents
• CRUD Operations
• Indexes

原文地址：Getting Started with MongoDB and Java: Part II, 感谢原作者分享。