欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  网络运营

如何测试端口通不通(四种方法)

程序员文章站 2022-05-12 08:40:14
一般情况下使用"telnet ip port"判断端口通不通,其实测试方法不止这一种,还有很多种方法,下面小编给大家分享了几种方法,具体内容请往下看: 准备环境 启动一...

一般情况下使用"telnet ip port"判断端口通不通,其实测试方法不止这一种,还有很多种方法,下面小编给大家分享了几种方法,具体内容请往下看:

准备环境

启动一个web服务器,提供端口.

[wyq@localhost ~]$ python -m simplehttpserver 8080
serving http on 0.0.0.0 port 8080 ...

用其它web服务器提供端口也一样,由于python比较方便,这里就用它

1、使用telnet判断

telnet是windows标准服务,可以直接用;如果是linux机器,需要安装telnet.

用法: telnet ip port

1)先用telnet连接不存在的端口

[root@localhost ~]# telnet 10.0.250.3 80
trying 10.0.250.3...
telnet: connect to address 10.0.250.3: connection refused #直接提示连接被拒绝

2)再连接存在的端口

[root@localhost ~]# telnet localhost 22
trying ::1...
connected to localhost. #看到connected就连接成功了
escape character is '^]'.
ssh-2.0-openssh_5.3
a
protocol mismatch.
connection closed by foreign host.

2、使用ssh判断

ssh是linux的标准配置并且最常用,可以用来判断端口吗?

用法: ssh -v -p port username@ip

-v 调试模式(会打印日志).

-p 指定端口

username可以随意

1)连接不存在端口

[root@localhost ~]# ssh 10.0.250.3 -p 80
ssh: connect to host 10.0.250.3 port 80: connection refused
[root@localhost ~]# ssh 10.0.250.3 -p 80 -v
openssh_5.3p1, openssl 1.0.1e-fips 11 feb 2013
debug1: reading configuration data /etc/ssh/ssh_config
debug1: applying options for *
debug1: connecting to 10.0.250.3 [10.0.250.3] port 80.
debug1: connect to address 10.0.250.3 port 80: connection refused
ssh: connect to host 10.0.250.3 port 80: connection refused

2)连接存在的端口

[root@localhost ~]# ssh ... -p 
a
^]
^c
[root@localhost ~]# ssh ... -p -v
openssh_.p, openssl ..e-fips feb 
debug: reading configuration data /etc/ssh/ssh_config
debug: applying options for *
debug: connecting to ... [...] port .
debug: connection established.
debug: permanently_set_uid: /
debug: identity file /root/.ssh/identity type -
debug: identity file /root/.ssh/identity-cert type -
debug: identity file /root/.ssh/id_rsa type -
debug: identity file /root/.ssh/id_rsa-cert type -
debug: identity file /root/.ssh/id_dsa type -
debug: identity file /root/.ssh/id_dsa-cert type -
a
^c

不用-v选项也可以咯

3、使用wget判断

wget是linux下的下载工具,需要先安装.

用法: wget ip:port

1)连接不存在的端口

[root@localhost ~]# wget ...:
---- ::-- http://.../
connecting to ...:... failed: connection refused.

2)连接存在的端口

[root@localhost ~]# wget ...:
---- ::-- http://...:/
connecting to ...:... connected.
http request sent, awaiting response...

4、使用端口扫描工具

[root@localhost ~]# nmap ... -p 
starting nmap . ( http://nmap.org ) at -- : cst
nmap scan report for ...
host is up (.s latency).
port state service
/tcp closed http
mac address: b:a::cf:fd:d (unknown)
nmap done: ip address ( host up) scanned in . seconds
[root@localhost ~]# nmap ... -p 
starting nmap . ( http://nmap.org ) at -- : cst
nmap scan report for ...
host is up (.s latency).
port state service
/tcp open http-proxy
mac address: b:a::cf:fd:d (unknown)
nmap done: ip address ( host up) scanned in . seconds
[root@localhost ~]# nmap ...
starting nmap . ( http://nmap.org ) at -- : cst
nmap scan report for ...
host is up (.s latency).
not shown: closed ports
port state service
/tcp open ssh
/tcp open rpcbind
/tcp open http-proxy
/tcp open unknown
mac address: b:a::cf:fd:d (unknown)
nmap done: ip address ( host up) scanned in . seconds

总结

提供端口服务,则使用了tcp协议,上面是以web服务器为例。如果服务器是更简单的tcp服务器,三个工具同样适用.

三个工具的共同点是:1.以tcp协议为基础;2.能访问指定端口. 遵循这两点可以找到很多工具.

一般在windows下使用telnet比较方便,linux下个人就比较喜欢用wget.