硬盘写满后redis的处理机制

前些天一台redis机器硬盘写满了，主要是由于程序bug导致备份量激增，而恰好监控程序的通知机制也罢工了，于是第一次体验到了redis的罢工（只读不写）。 现在我们来看下在磁盘写满后redis的处理机制： save流程：serverCron-rdbSaveBackground-rdbSave save后

前些天一台redis机器硬盘写满了，主要是由于程序bug导致备份量激增，而恰好监控程序的通知机制也罢工了，于是第一次体验到了redis的罢工（只读不写）。

现在我们来看下在磁盘写满后redis的处理机制：

save流程：serverCron->rdbSaveBackground->rdbSave
save后流程：serverCron->backgroundSaveDoneHandler
上述流程产生的结果就是server.lastbgsave_status = REDIS_ERR，

受其影响，processCommand和luaRedisGenericCommand中判断如果是写操作，则直接返回REDIS_OK，而没有实际写入

1.rdbSave所有的写出错都会返回REDIS_ERR

int rdbSave(char *filename) {
    dictIterator *di = NULL;
    dictEntry *de;
    char tmpfile[256];
    char magic[10];
    int j;
    long long now = mstime();
    FILE *fp;
    rio rdb;
    uint64_t cksum;

    snprintf(tmpfile,256,"temp-%d.rdb", (int) getpid());
    fp = fopen(tmpfile,"w");
    if (!fp) {
        redisLog(REDIS_WARNING, "Failed opening .rdb for saving: %s",
            strerror(errno));
        return REDIS_ERR;
    }

    rioInitWithFile(&rdb,fp);
    if (server.rdb_checksum)
        rdb.update_cksum = rioGenericUpdateChecksum;
    snprintf(magic,sizeof(magic),"REDIS%04d",REDIS_RDB_VERSION);
    if (rdbWriteRaw(&rdb,magic,9) == -1) goto werr;

    for (j = 0; j dict;
        if (dictSize(d) == 0) continue;
        di = dictGetSafeIterator(d);
        if (!di) {
            fclose(fp);
            return REDIS_ERR;
        }

        /* Write the SELECT DB opcode */
        if (rdbSaveType(&rdb,REDIS_RDB_OPCODE_SELECTDB) == -1) goto werr;
        if (rdbSaveLen(&rdb,j) == -1) goto werr;

        /* Iterate this DB writing every entry */
        while((de = dictNext(di)) != NULL) {
            sds keystr = dictGetKey(de);
            robj key, *o = dictGetVal(de);
            long long expire;

            initStaticStringObject(key,keystr);
            expire = getExpire(db,&key);
            if (rdbSaveKeyValuePair(&rdb,&key,o,expire,now) == -1) goto werr;
        }
        dictReleaseIterator(di);
    }
    di = NULL; /* So that we don't release it again on error. */

    /* EOF opcode */
    if (rdbSaveType(&rdb,REDIS_RDB_OPCODE_EOF) == -1) goto werr;

    /* CRC64 checksum. It will be zero if checksum computation is disabled, the
     * loading code skips the check in this case. */
    cksum = rdb.cksum;
    memrev64ifbe(&cksum);
    if (rioWrite(&rdb,&cksum,8) == 0) goto werr;

    /* Make sure data will not remain on the OS's output buffers */
    if (fflush(fp) == EOF) goto werr;
    if (fsync(fileno(fp)) == -1) goto werr;
    if (fclose(fp) == EOF) goto werr;

    /* Use RENAME to make sure the DB file is changed atomically only
     * if the generate DB file is ok. */
    if (rename(tmpfile,filename) == -1) {
        redisLog(REDIS_WARNING,"Error moving temp DB file on the final destination: %s", strerror(errno));
        unlink(tmpfile);
        return REDIS_ERR;
    }
    redisLog(REDIS_NOTICE,"DB saved on disk");
    server.dirty = 0;
    server.lastsave = time(NULL);
    server.lastbgsave_status = REDIS_OK;
    return REDIS_OK;

werr:
    fclose(fp);
    unlink(tmpfile);
    redisLog(REDIS_WARNING,"Write error saving DB on disk: %s", strerror(errno));
    if (di) dictReleaseIterator(di);
    return REDIS_ERR;
}

2.rdbSaveBackground中，如果子进程调用rdbsave返回REDIS_ERR，那么子进程exit(1)

int rdbSaveBackground(char *filename) {
    pid_t childpid;
    long long start;

    if (server.rdb_child_pid != -1) return REDIS_ERR;

    server.dirty_before_bgsave = server.dirty;
    server.lastbgsave_try = time(NULL);

    start = ustime();
    if ((childpid = fork()) == 0) {
        int retval;

        /* Child */
        closeListeningSockets(0);
        redisSetProcTitle("redis-rdb-bgsave");
        retval = rdbSave(filename);
        if (retval == REDIS_OK) {
            size_t private_dirty = zmalloc_get_private_dirty();

            if (private_dirty) {
                redisLog(REDIS_NOTICE,
                    "RDB: %zu MB of memory used by copy-on-write",
                    private_dirty/(1024*1024));
            }
        }
        exitFromChild((retval == REDIS_OK) ? 0 : 1);       //进程退出时返回0/1
    } else {
        /* Parent */
        server.stat_fork_time = ustime()-start;
        if (childpid == -1) {
            server.lastbgsave_status = REDIS_ERR;
            redisLog(REDIS_WARNING,"Can't save in background: fork: %s",
                strerror(errno));
            return REDIS_ERR;
        }
        redisLog(REDIS_NOTICE,"Background saving started by pid %d",childpid);
        server.rdb_save_time_start = time(NULL);
        server.rdb_child_pid = childpid;
        updateDictResizePolicy();
        return REDIS_OK;
    }
    return REDIS_OK; /* unreached */
}

3.bgsave完成后，serverCron中得到bgsave子进程的返回码进行后续处理

    /* Check if a background saving or AOF rewrite in progress terminated. */
    if (server.rdb_child_pid != -1 || server.aof_child_pid != -1) {
        int statloc;
        pid_t pid;

        if ((pid = wait3(&statloc,WNOHANG,NULL)) != 0) {
            int exitcode = WEXITSTATUS(statloc);
            int bysignal = 0;

            if (WIFSIGNALED(statloc)) bysignal = WTERMSIG(statloc);

            if (pid == server.rdb_child_pid) {
                backgroundSaveDoneHandler(exitcode,bysignal);    //根据bgsave子进程的exitcode以及是否由信号结束的标签进行后续处理
            } else if (pid == server.aof_child_pid) {
                backgroundRewriteDoneHandler(exitcode,bysignal);
            } else {
                redisLog(REDIS_WARNING,
                    "Warning, detected child with unmatched pid: %ld",
                    (long)pid);
            }
            updateDictResizePolicy();
        }
    }

4.如果子进程非信号结束，并且exitcode非0，那么设置bgsave状态为REDIS_ERR

void backgroundSaveDoneHandler(int exitcode, int bysignal) {
    if (!bysignal && exitcode == 0) {
        redisLog(REDIS_NOTICE,
            "Background saving terminated with success");
        server.dirty = server.dirty - server.dirty_before_bgsave;
        server.lastsave = time(NULL);
        server.lastbgsave_status = REDIS_OK;
    } else if (!bysignal && exitcode != 0) {
        redisLog(REDIS_WARNING, "Background saving error");
        server.lastbgsave_status = REDIS_ERR;      //状态转换
    } else {
        mstime_t latency;

        redisLog(REDIS_WARNING,
            "Background saving terminated by signal %d", bysignal);
        latencyStartMonitor(latency);
        rdbRemoveTempFile(server.rdb_child_pid);
        latencyEndMonitor(latency);
        latencyAddSampleIfNeeded("rdb-unlink-temp-file",latency);
        /* SIGUSR1 is whitelisted, so we have a way to kill a child without
         * tirggering an error conditon. */
        if (bysignal != SIGUSR1)
            server.lastbgsave_status = REDIS_ERR;
    }
    server.rdb_child_pid = -1;
    server.rdb_save_time_last = time(NULL)-server.rdb_save_time_start;
    server.rdb_save_time_start = -1;
    /* Possibly there are slaves waiting for a BGSAVE in order to be served
     * (the first stage of SYNC is a bulk transfer of dump.rdb) */
    updateSlavesWaitingBgsave((!bysignal && exitcode == 0) ? REDIS_OK : REDIS_ERR);
}

5.processCommand中判定cmd是写操作的话，直接返回REDIS_OK

    /* Don't accept write commands if there are problems persisting on disk
     * and if this is a master instance. */
    if (((server.stop_writes_on_bgsave_err &&
          server.saveparamslen > 0 &&
          server.lastbgsave_status == REDIS_ERR) ||
          server.aof_last_write_status == REDIS_ERR) &&
        server.masterhost == NULL &&
        (c->cmd->flags & REDIS_CMD_WRITE ||
         c->cmd->proc == pingCommand))
    {
        flagTransaction(c);
        if (server.aof_last_write_status == REDIS_OK)
            addReply(c, shared.bgsaveerr);
        else
            addReplySds(c,
                sdscatprintf(sdsempty(),
                "-MISCONF Errors writing to the AOF file: %s\r\n",
                strerror(server.aof_last_write_errno)));
        return REDIS_OK;
    }

6.luaRedisGenericCommand中判定cmd是写操作的话，屏蔽

    /* Write commands are forbidden against read-only slaves, or if a
     * command marked as non-deterministic was already called in the context
     * of this script. */
    if (cmd->flags & REDIS_CMD_WRITE) {
        if (server.lua_random_dirty) {
            luaPushError(lua,
                "Write commands not allowed after non deterministic commands");
            goto cleanup;
        } else if (server.masterhost && server.repl_slave_ro &&
                   !server.loading &&
                   !(server.lua_caller->flags & REDIS_MASTER))
        {
            luaPushError(lua, shared.roslaveerr->ptr);
            goto cleanup;
        } else if (server.stop_writes_on_bgsave_err &&
                   server.saveparamslen > 0 &&
                   server.lastbgsave_status == REDIS_ERR)
        {
            luaPushError(lua, shared.bgsaveerr->ptr);
            goto cleanup;
        }
    }

cleanup:
    /* Clean up. Command code may have changed argv/argc so we use the
     * argv/argc of the client instead of the local variables. */
    for (j = 0; j argc; j++) {
        robj *o = c->argv[j];

        /* Try to cache the object in the cached_objects array.
         * The object must be small, SDS-encoded, and with refcount = 1
         * (we must be the only owner) for us to cache it. */
        if (j refcount == 1 &&
            o->encoding == REDIS_ENCODING_RAW &&
            sdslen(o->ptr) ptr))-(sizeof(struct sdshdr)));

            if (cached_objects[j]) decrRefCount(cached_objects[j]);
            cached_objects[j] = o;
            cached_objects_len[j] = sh->free + sh->len;
        } else {
            decrRefCount(o);
        }
    }

    if (c->argv != argv) {
        zfree(c->argv);
        argv = NULL;
    }

    if (raise_error) {
        /* If we are here we should have an error in the stack, in the
         * form of a table with an "err" field. Extract the string to
         * return the plain error. */
        lua_pushstring(lua,"err");
        lua_gettable(lua,-2);
        return lua_error(lua);
    }
    return 1;