欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  数据库

MySQL Study之--MySQL innodb引擎备份工具XtraBackup之一(Install)_MySQL

程序员文章站 2022-04-29 19:34:13
...
MySQL Study之--MySQL innodb引擎备份工具XtraBackup之一(Install)

Xtrabackup是一个对InnoDB做数据备份的工具,支持在线热备份(备份时不影响数据读写),是商业备份工具InnoDB Hotbackup的一个很好的替代品。

Xtrabackup有两个主要的工具:xtrabackup、innobackupex

(1)xtrabackup只能备份InnoDB和XtraDB两种数据表,而不能备份MyISAM数据表

(2)innobackupex-1.5.1则封装了xtrabackup,是一个脚本封装,所以能同时备份处理innodb和myisam,但在处理myisam时需要加一个读锁

安装XtraBackup,首先要安装MySQL

1、查看MySQL版本

[root@rh64 ~]# service mysql start

Starting MySQL (Percona Server)...[ OK ]

[root@rh64 ~]# mysql -u root -p

Enter password:

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 1

Server version: 5.6.25-73.1 Percona Server (GPL), Release 73.1, Revision 07b797f

Copyright (c) 2009-2015 Percona LLC and/or its affiliates

Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

2、安装配置

在/etc/my.cnf文件要配置数据所存储的目录

[root@rh64 XtraBackup]# cat /etc/my.cnf |grep datadir

datadir=/var/lib/mysql

3、下载安装

MySQL Study之--MySQL innodb引擎备份工具XtraBackup之一(Install)_MySQL

安装:

[root@rh64 XtraBackup]# ls -l

total 26808

-rw-r----- 1 mysql mysql 5664452 Oct 27 10:27 percona-xtrabackup-2.3.2-1.el6.x86_64.rpm

-rw-r----- 1 mysql mysql 20807976 Oct 27 10:27 percona-xtrabackup-debuginfo-2.3.2-1.el6.x86_64.rpm

-rw-r----- 1 mysql mysql 971264 Oct 27 10:27 percona-xtrabackup-test-2.3.2-1.el6.x86_64.rpm

[root@rh64 XtraBackup]# rpm -ivh percona-xtrabackup-2.3.2-1.el6.x86_64.rpm

warning: percona-xtrabackup-2.3.2-1.el6.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID cd2efd2a: NOKEY

error: Failed dependencies:

libev.so.4()(64bit) is needed by percona-xtrabackup-2.3.2-1.el6.x86_64

----安装出错,要求需有libev.so库支持

下载libev安装包:

[root@rh64 libev-4.15]# tar zxvf libev-4.15.tar.gz

安装libev:

[root@rh64 libev-4.15]# ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking whether to enable maintainer-specific portions of Makefiles... no

checking for gcc... gcc

checking whether the C compiler works... yes

checking for C compiler default output file name... a.out

checking for suffix of executables...

checking whether we are cross compiling... no

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking for style of include used by make... GNU

checking dependency style of gcc... gcc3

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking how to print strings... printf

checking for a sed that does not truncate output... /bin/sed

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for fgrep... /bin/grep -F

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B

checking the name lister (/usr/bin/nm -B) interface... BSD nm

checking whether ln -s works... yes

checking the maximum length of command line arguments... 1966080

checking whether the shell understands some XSI constructs... yes

checking whether the shell understands "+="... yes

checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop

checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop

checking for /usr/bin/ld option to reload object files... -r

checking for objdump... objdump

checking how to recognize dependent libraries... pass_all

checking for dlltool... no

checking how to associate runtime and link libraries... printf %s\n

checking for ar... ar

checking for archiver @FILE support... @

......

[root@rh64 libev-4.15]# make

make all-am

make[1]: Entering directory `/home/mysql/libev-4.15'

/bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -g -O3 -MT ev.lo -MD -MP -MF .deps/ev.Tpo -c -o ev.lo ev.c

libtool: compile: gcc -DHAVE_CONFIG_H -I. -g -O3 -MT ev.lo -MD -MP -MF .deps/ev.Tpo -c ev.c -fPIC -DPIC -o .libs/ev.o

ev.c:1531: warning: 'ev_default_loop_ptr' initialized and declared 'extern'

libtool: compile: gcc -DHAVE_CONFIG_H -I. -g -O3 -MT ev.lo -MD -MP -MF .deps/ev.Tpo -c ev.c -o ev.o >/dev/null 2>&1

mv -f .deps/ev.Tpo .deps/ev.Plo

/bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -g -O3 -MT event.lo -MD -MP -MF .deps/event.Tpo -c -o event.lo event.c

libtool: compile: gcc -DHAVE_CONFIG_H -I. -g -O3 -MT event.lo -MD -MP -MF .deps/event.Tpo -c event.c -fPIC -DPIC -o .libs/event.o

libtool: compile: gcc -DHAVE_CONFIG_H -I. -g -O3 -MT event.lo -MD -MP -MF .deps/event.Tpo -c event.c -o event.o >/dev/null 2>&1

mv -f .deps/event.Tpo .deps/event.Plo

/bin/sh ./libtool --tag=CC --mode=link gcc -g -O3 -version-info 4:0:0 -o libev.la -rpath /usr/local/lib ev.lo event.lo -lm

libtool: link: gcc -shared -fPIC -DPIC .libs/ev.o .libs/event.o -lm -O3 -Wl,-soname -Wl,libev.so.4 -o .libs/libev.so.4.0.0

libtool: link: (cd ".libs" && rm -f "libev.so.4" && ln -s "libev.so.4.0.0" "libev.so.4")

libtool: link: (cd ".libs" && rm -f "libev.so" && ln -s "libev.so.4.0.0" "libev.so")

libtool: link: ar cru .libs/libev.a ev.o event.o

libtool: link: ranlib .libs/libev.a

libtool: link: ( cd ".libs" && rm -f "libev.la" && ln -s "../libev.la" "libev.la" )

make[1]: Leaving directory `/home/mysql/libev-4.15'

[root@rh64 libev-4.15]# make install

make[1]: Entering directory `/home/mysql/libev-4.15'

/bin/mkdir -p '/usr/local/lib'

/bin/sh ./libtool --mode=install /usr/bin/install -c libev.la '/usr/local/lib'

libtool: install: /usr/bin/install -c .libs/libev.so.4.0.0 /usr/local/lib/libev.so.4.0.0

libtool: install: (cd /usr/local/lib && { ln -s -f libev.so.4.0.0 libev.so.4 || { rm -f libev.so.4 && ln -s libev.so.4.0.0 libev.so.4; }; })

libtool: install: (cd /usr/local/lib && { ln -s -f libev.so.4.0.0 libev.so || { rm -f libev.so && ln -s libev.so.4.0.0 libev.so; }; })

libtool: install: /usr/bin/install -c .libs/libev.lai /usr/local/lib/libev.la

libtool: install: /usr/bin/install -c .libs/libev.a /usr/local/lib/libev.a

libtool: install: chmod 644 /usr/local/lib/libev.a

libtool: install: ranlib /usr/local/lib/libev.a

libtool: finish: PATH="/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib

----------------------------------------------------------------------

Libraries have been installed in:

/usr/local/lib

If you ever happen to want to link against installed libraries

in a given directory, LIBDIR, you must either use libtool, and

specify the full pathname of the library, or use the `-LLIBDIR'

flag during linking and do at least one of the following:

- add LIBDIR to the `LD_LIBRARY_PATH' environment variable

during execution

- add LIBDIR to the `LD_RUN_PATH' environment variable

during linking

- use the `-Wl,-rpath -Wl,LIBDIR' linker flag

- have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for

more information, such as the ld(1) and ld.so(8) manual pages.

----------------------------------------------------------------------

/bin/mkdir -p '/usr/local/include'

/usr/bin/install -c -m 644 ev.h ev++.h event.h '/usr/local/include'

/bin/mkdir -p '/usr/local/share/man/man3'

/usr/bin/install -c -m 644 ev.3 '/usr/local/share/man/man3'

make[1]: Leaving directory `/home/mysql/libev-4.15'

查看libev安装信息:

[root@rh64 libev-4.15]# find / -name 'libev.so*'

/home/mysql/libev-4.15/.libs/libev.so.4.0.0

/home/mysql/libev-4.15/.libs/libev.so

/home/mysql/libev-4.15/.libs/libev.so.4

/usr/local/lib/libev.so.4.0.0

/usr/local/lib/libev.so.4

/usr/local/lib/libev.so

配置lib访问环境:

[root@rh64 XtraBackup]# cat /etc/profile

export LIBDIR=/usr/local/lib

export LD_LIBRARY_PATH=/usr/local/lib

export LD_RUN_PATH=/usr/local/lib

"/etc/profile" 82L, 1898C written

再次安装:

[root@rh64 XtraBackup]# rpm -ivh percona-xtrabackup-2.3.2-1.el6.x86_64.rpm

warning: percona-xtrabackup-2.3.2-1.el6.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID cd2efd2a: NOKEY

error: Failed dependencies:

libev.so.4()(64bit) is needed by percona-xtrabackup-2.3.2-1.el6.x86_64

---仍然失败!!!可能是libev的版本不对,应该下载libev(64)

下载libev(64)并安装:

http://rpmfind.net/linux/rpm2html/search.php?query=libev.so.4()(64bit)

[root@rh64 mysql]# rpm -ivh libev-4.04-2.el6.x86_64.rpm

warning: libev-4.04-2.el6.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID 66534c2b: NOKEY

Preparing... ########################################### [100%]

1:libev ########################################### [100%]

[root@rh64 mysql]# rpm -qa |grep libev

libevent-1.4.13-4.el6.x86_64

libevent-1.4.13-4.el6.i686

libev-4.04-2.el6.x86_64

[root@rh64 mysql]# rpm -ql libev

/usr/lib64/libev.so.4

/usr/lib64/libev.so.4.0.0

/usr/share/doc/libev-4.04

/usr/share/doc/libev-4.04/Changes

/usr/share/doc/libev-4.04/LICENSE

/usr/share/doc/libev-4.04/README

安装xtrabackup:

[root@rh64 XtraBackup]# ls

percona-xtrabackup-2.3.2-1.el6.x86_64.rpm percona-xtrabackup-test-2.3.2-1.el6.x86_64.rpm

percona-xtrabackup-debuginfo-2.3.2-1.el6.x86_64.rpm

[root@rh64 XtraBackup]# rpm -ivh *

warning: percona-xtrabackup-2.3.2-1.el6.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID cd2efd2a: NOKEY

Preparing... ########################################### [100%]

1:percona-xtrabackup ########################################### [ 33%]

2:percona-xtrabackup-test########################################### [ 67%]

3:percona-xtrabackup-debu########################################### [100%]

----安装成功!!!

[root@rh64 XtraBackup]# man innobackupex

INNOBACKUPEX(1) Percona XtraBackup INNOBACKUPEX(1)

NAME

innobackupex - innobackupex Documentation

The innobackupex tool is a Perl script that acts as a wrapper for the xtrabackup C program. It

is a patched version of the innobackup Perl script that Oracle distributes with the InnoDB Hot

Backup tool. It enables more functionality by integrating xtrabackup and other functions such as

file copying and streaming, and adds some convenience. It lets you perform point-in-time backups

of InnoDB / XtraDB tables together with the schema definitions, MyISAM tables, and other por-

tions of the server.

This manual section explains how to use innobackupex in detail.

PREREQUISITES

Connection and Privileges Needed

Percona XtraBackup needs to be able to connect to the database server and perform operations on

the server and the datadir when creating a backup, when preparing in some scenarios and when

restoring it. In order to do so, there are privileges and permission requirements on its execu-

tion that must be fulfilled.

Privileges refers to the operations that a system user is permitted to do in the database

server. They are set at the database server and only apply to users in the database server.

Permissions are those which permits a user to perform operations on the system, like reading,

writing or executing on a certain directory or start/stop a system service. They are set at a

system level and only apply to system users.

Whether xtrabackup or innobackupex is used, there are two actors involved: the user invoking the

program - a system user - and the user performing action in the database server - a database

user. Note that these are different users in different places, even tough they may have the same

username.

All the invocations of innobackupex and xtrabackup in this documentation assumes that the system

user has the appropriate permissions and you are providing the relevant options for connecting

the database server - besides the options for the action to be performed - and the database user

has adequate privileges.

Connecting to the server

The database user used to connect to the server and its password are specified by the --user and

--password option,

$ innobackupex --user=DBUSER --password=SECRET /path/to/backup/dir/

$ innobackupex --user=LUKE --password=US3TH3F0RC3 --stream=tar ./ | bzip2 -

$ xtrabackup --user=DVADER --password=14MY0URF4TH3R --backup --target-dir=/data/bkps/

相关标签: 备份工具 引擎