i.MX6 Yocto 单独编译 uboot 报错

i.MX6 单独编译 uboot 我使用的是

[email protected]-virtual-machine:/opt/yocto/fsl-release-bsp/build-mini$ bitbake -c compile -f -v u-boot-imx

但是在编译过程中出现如下报错

ERROR: u-boot-imx-2016.03-r0 do_compile: oe_runmake failed
ERROR: u-boot-imx-2016.03-r0 do_compile: Function failed: do_compile (log file is located at /opt/yocto/fsl-release-bsp/build-mini/tmp/work/imx6sxsabresd-poky-linux-gnueabi/u-boot-imx/2016.03-r0/temp/log.do_compile.26242)
ERROR: Logfile of failure stored in: /opt/yocto/fsl-release-bsp/build-mini/tmp/work/imx6sxsabresd-poky-linux-gnueabi/u-boot-imx/2016.03-r0/temp/log.do_compile.26242

ERROR: Task 4 (/opt/yocto/fsl-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-bsp/u-boot/u-boot-imx_2016.03.bb, do_compile) failed with exit code '1'

由于一开始编译时可以成功的，且编译中途有终止过，所以怀疑是需要清除编译过程中产生的中间文件
使用如下指令清除中间文件

make mrproper

再继续编译

bitbake -c compile -f -v u-boot-imx

部署内核镜像到deploy目录

bitbake -c deploy -f -v u-boot-imx

编译成功如下显示

NOTE: Tasks Summary: Attempted 234 tasks of which 233 didn't need to be rerun and all succeeded.