欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  后端开发

php forbidden,这是两个配置文件,已经折腾一下午了,参照网上各种方式都改了

程序员文章站 2022-04-20 14:40:52
...
Virtual Hosts
# Virtual Hosts
#
# Required modules: mod_log_config

# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# 
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any  block.
#
#
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot "/usr/docs/dummy-host.example.com"
#    ServerName dummy-host.example.com
#    ServerAlias www.dummy-host.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host.example.com-access_log" common
#

#
#    ServerAdmin webmaster@dummy-host2.example.com
#    DocumentRoot "/usr/docs/dummy-host2.example.com"
#    ServerName dummy-host2.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host2.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host2.example.com-access_log" common
#  
    DocumentRoot "/Users/Fido/Desktop/php"   
    ErrorLog "/private/var/log/apache2/localhost-error_log"  
    CustomLog "/private/var/log/apache2/localhost-access_log" common
    
                  Options Indexes FollowSymLinks MultiViews
                  AllowOverride None
                  Require all granted
          

httpd.conf

    #is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See  for detailed information.
    # In particular, see 
    # 
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
    # will be interpreted as '/logs/access_log'.

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used.  If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    #
    ServerRoot "/usr"

    #
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    #
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    #
    # Mutex default:/private/var/run

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the 
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to 
    # prevent Apache from glomming onto all bound IP addresses.
    #
    #Listen 12.34.56.78:80
    Listen 80

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #
    LoadModule authn_file_module libexec/apache2/mod_authn_file.so
    #LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
    #LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
    #LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
    #LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so
    LoadModule authn_core_module libexec/apache2/mod_authn_core.so
    LoadModule authz_host_module libexec/apache2/mod_authz_host.so
    LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
    LoadModule authz_user_module libexec/apache2/mod_authz_user.so
    #LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
    #LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
    #LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so
    LoadModule authz_core_module libexec/apache2/mod_authz_core.so
    #LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.so
    LoadModule access_compat_module libexec/apache2/mod_access_compat.so
    LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
    #LoadModule auth_form_module libexec/apache2/mod_auth_form.so
    #LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
    #LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so
    #LoadModule file_cache_module libexec/apache2/mod_file_cache.so
    #LoadModule cache_module libexec/apache2/mod_cache.so
    #LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so
    #LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so
    #LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so
    #LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so
    #LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so
    #LoadModule watchdog_module libexec/apache2/mod_watchdog.so
    #LoadModule macro_module libexec/apache2/mod_macro.so
    #LoadModule dbd_module libexec/apache2/mod_dbd.so
    #LoadModule dumpio_module libexec/apache2/mod_dumpio.so
    #LoadModule echo_module libexec/apache2/mod_echo.so
    #LoadModule buffer_module libexec/apache2/mod_buffer.so
    #LoadModule data_module libexec/apache2/mod_data.so
    #LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so
    LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
    #LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
    #LoadModule request_module libexec/apache2/mod_request.so
    #LoadModule include_module libexec/apache2/mod_include.so
    LoadModule filter_module libexec/apache2/mod_filter.so
    #LoadModule reflector_module libexec/apache2/mod_reflector.so
    #LoadModule substitute_module libexec/apache2/mod_substitute.so
    #LoadModule sed_module libexec/apache2/mod_sed.so
    #LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so
    #LoadModule deflate_module libexec/apache2/mod_deflate.so
    #LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so
    #LoadModule proxy_html_module libexec/apache2/mod_proxy_html.so
    LoadModule mime_module libexec/apache2/mod_mime.so
    #LoadModule ldap_module libexec/apache2/mod_ldap.so
    LoadModule log_config_module libexec/apache2/mod_log_config.so
    #LoadModule log_debug_module libexec/apache2/mod_log_debug.so
    #LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
    #LoadModule logio_module libexec/apache2/mod_logio.so
    LoadModule env_module libexec/apache2/mod_env.so
    #LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
    #LoadModule expires_module libexec/apache2/mod_expires.so
    LoadModule headers_module libexec/apache2/mod_headers.so
    #LoadModule usertrack_module libexec/apache2/mod_usertrack.so
    ##LoadModule unique_id_module libexec/apache2/mod_unique_id.so
    LoadModule setenvif_module libexec/apache2/mod_setenvif.so
    LoadModule version_module libexec/apache2/mod_version.so
    #LoadModule remoteip_module libexec/apache2/mod_remoteip.so
    LoadModule proxy_module libexec/apache2/mod_proxy.so
    LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
    LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
    LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
    LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
    LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
    LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so
    #LoadModule session_module libexec/apache2/mod_session.so
    #LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so
    #LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so
    LoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so
    #LoadModule ssl_module libexec/apache2/mod_ssl.so
    #LoadModule dialup_module libexec/apache2/mod_dialup.so
    LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so
    #LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so
    LoadModule unixd_module libexec/apache2/mod_unixd.so
    #LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so
    #LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so
    #LoadModule dav_module libexec/apache2/mod_dav.so
    LoadModule status_module libexec/apache2/mod_status.so
    LoadModule autoindex_module libexec/apache2/mod_autoindex.so
    #LoadModule asis_module libexec/apache2/mod_asis.so
    #LoadModule info_module libexec/apache2/mod_info.so
    #LoadModule cgi_module libexec/apache2/mod_cgi.so
    #LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
    #LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so
    #LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
    LoadModule negotiation_module libexec/apache2/mod_negotiation.so
    LoadModule dir_module libexec/apache2/mod_dir.so
    #LoadModule imagemap_module libexec/apache2/mod_imagemap.so
    #LoadModule actions_module libexec/apache2/mod_actions.so
    #LoadModule speling_module libexec/apache2/mod_speling.so
    #LoadModule userdir_module libexec/apache2/mod_userdir.so
    LoadModule alias_module libexec/apache2/mod_alias.so
    LoadModule rewrite_module libexec/apache2/mod_rewrite.so
    LoadModule php5_module libexec/apache2/libphp5.so
    #LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so

    
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.  
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    User _www
    Group _www

    

    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    #  definition.  These values also provide defaults for
    # any  containers you may define later in the file.
    #
    # All of these directives may appear inside  containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. admin@your-domain.com
    #
    ServerAdmin you@example.com

    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    #ServerName www.wdfxy.com:80

    #
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other 
    #  blocks below.
    #
    
        Options FollowSymLinks
        AllowOverride None
        Order deny,allow
        allow from all  
    

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/Users/Fido/Desktop/php"
    
        #
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        #
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        #
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.4/mod/core.html#options
        # for more information.
        #
        Options FollowSymLinks Multiviews
        MultiviewsMatch Any

        #
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   AllowOverride FileInfo AuthConfig Limit
        #
        AllowOverride None
        Allow from all    
        #
        # Controls who can get stuff from this server.
        #
        Require all granted
        
        #
        # Controls who can get stuff from this server.
        #
        #   onlineoffline tag - don't remove
        
           Order Deny,Allow
           #Deny from all

        #Allow from 127.0.0.1
        Allow from all

    

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    
        DirectoryIndex index.html  index.php
    

    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    
        Require all denied
    

    #
    # Apple specific filesystem protection.
    #
    
        Require all denied
    
        Require all denied
    

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a 
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a 
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog "/private/var/log/apache2/error_log"

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    
        #
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        #
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common

        
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        

        #
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a 
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per- access logfiles, transactions will be
        # logged therein and *not* in this file.
        #
        CustomLog "/private/var/log/apache2/access_log" common

        #
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #
        #CustomLog "/private/var/log/apache2/access_log" combined
    
        #
        # Redirect: Allows you to tell clients about documents that used to 
        # exist in your server's namespace, but do not anymore. The client 
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://www.example.com/bar

        #
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        #
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a  section to allow access to
        # the filesystem path.

        #
        # ScriptAlias: This controls which directories contain server scripts. 
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        #
        ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"

    
        #
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #
        #Scriptsock cgisock
    

    #
    # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    
        AllowOverride None
        Options None
        Require all granted
    
        #
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        #
        TypesConfig /private/etc/apache2/mime.types

        #
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #
        #AddType application/x-gzip .tgz
        #
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        #
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        #
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz

        #
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        #
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #
        #AddHandler cgi-script .cgi





        # For type maps (negotiated resources):
        #AddHandler type-map var

        #
        # Filters allow you to process content before it is sent to the client.
        #
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile /private/etc/apache2/magic

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    #

    #
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited

    #
    # EnableMMAP and EnableSendfile: On systems that support it, 
    # memory-mapping or the sendfile syscall may be used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted 
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #
    #EnableMMAP off
    #EnableSendfile on

    TraceEnable off

    # Supplemental configuration
    #
    # The configuration files in the /private/etc/apache2/extra/ directory can be 
    # included to add extra features or to modify the default configuration of 
    # the server, or you may simply copy their contents here and change as 
    # necessary.

    # Server-pool management (MPM specific)
    Include /private/etc/apache2/extra/httpd-mpm.conf

    # Multi-language error messages
    #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf

    # Fancy directory listings
    Include /private/etc/apache2/extra/httpd-autoindex.conf

    # Language settings
    #Include /private/etc/apache2/extra/httpd-languages.conf

    # User home directories
    #Include /private/etc/apache2/extra/httpd-userdir.conf

    # Real-time info on requests and configuration
    #Include /private/etc/apache2/extra/httpd-info.conf

    # Virtual hosts
    Include /private/etc/apache2/extra/httpd-vhosts.conf

    # Local access to the Apache HTTP Server Manual
    #Include /private/etc/apache2/extra/httpd-manual.conf

    # Distributed authoring and versioning (WebDAV)
    #Include /private/etc/apache2/extra/httpd-dav.conf

    # Various default settings
    #Include /private/etc/apache2/extra/httpd-default.conf

    # Configure mod_proxy_html to understand HTML4/XHTML1
    
    Include /private/etc/apache2/extra/proxy-html.conf
    

    # Secure (SSL/TLS) connections
    #Include /private/etc/apache2/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    #
    
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    

    Include /private/etc/apache2/other/*.conf

    #
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #
    #
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #
    #
    #RequestHeader unset DNT env=bad_DNT
    #

回复内容:

Virtual Hosts

# Virtual Hosts
#
# Required modules: mod_log_config

# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# 
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any  block.
#
#
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot "/usr/docs/dummy-host.example.com"
#    ServerName dummy-host.example.com
#    ServerAlias www.dummy-host.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host.example.com-access_log" common
#

#
#    ServerAdmin webmaster@dummy-host2.example.com
#    DocumentRoot "/usr/docs/dummy-host2.example.com"
#    ServerName dummy-host2.example.com
#    ErrorLog "/private/var/log/apache2/dummy-host2.example.com-error_log"
#    CustomLog "/private/var/log/apache2/dummy-host2.example.com-access_log" common
#  
    DocumentRoot "/Users/Fido/Desktop/php"   
    ErrorLog "/private/var/log/apache2/localhost-error_log"  
    CustomLog "/private/var/log/apache2/localhost-access_log" common
    
                  Options Indexes FollowSymLinks MultiViews
                  AllowOverride None
                  Require all granted
          

httpd.conf

    #is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See  for detailed information.
    # In particular, see 
    # 
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
    # will be interpreted as '/logs/access_log'.

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used.  If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    #
    ServerRoot "/usr"

    #
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    #
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    #
    # Mutex default:/private/var/run

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the 
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to 
    # prevent Apache from glomming onto all bound IP addresses.
    #
    #Listen 12.34.56.78:80
    Listen 80

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #
    LoadModule authn_file_module libexec/apache2/mod_authn_file.so
    #LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
    #LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
    #LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
    #LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so
    LoadModule authn_core_module libexec/apache2/mod_authn_core.so
    LoadModule authz_host_module libexec/apache2/mod_authz_host.so
    LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
    LoadModule authz_user_module libexec/apache2/mod_authz_user.so
    #LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
    #LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
    #LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so
    LoadModule authz_core_module libexec/apache2/mod_authz_core.so
    #LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.so
    LoadModule access_compat_module libexec/apache2/mod_access_compat.so
    LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
    #LoadModule auth_form_module libexec/apache2/mod_auth_form.so
    #LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
    #LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so
    #LoadModule file_cache_module libexec/apache2/mod_file_cache.so
    #LoadModule cache_module libexec/apache2/mod_cache.so
    #LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so
    #LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so
    #LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so
    #LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so
    #LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so
    #LoadModule watchdog_module libexec/apache2/mod_watchdog.so
    #LoadModule macro_module libexec/apache2/mod_macro.so
    #LoadModule dbd_module libexec/apache2/mod_dbd.so
    #LoadModule dumpio_module libexec/apache2/mod_dumpio.so
    #LoadModule echo_module libexec/apache2/mod_echo.so
    #LoadModule buffer_module libexec/apache2/mod_buffer.so
    #LoadModule data_module libexec/apache2/mod_data.so
    #LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so
    LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
    #LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
    #LoadModule request_module libexec/apache2/mod_request.so
    #LoadModule include_module libexec/apache2/mod_include.so
    LoadModule filter_module libexec/apache2/mod_filter.so
    #LoadModule reflector_module libexec/apache2/mod_reflector.so
    #LoadModule substitute_module libexec/apache2/mod_substitute.so
    #LoadModule sed_module libexec/apache2/mod_sed.so
    #LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so
    #LoadModule deflate_module libexec/apache2/mod_deflate.so
    #LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so
    #LoadModule proxy_html_module libexec/apache2/mod_proxy_html.so
    LoadModule mime_module libexec/apache2/mod_mime.so
    #LoadModule ldap_module libexec/apache2/mod_ldap.so
    LoadModule log_config_module libexec/apache2/mod_log_config.so
    #LoadModule log_debug_module libexec/apache2/mod_log_debug.so
    #LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
    #LoadModule logio_module libexec/apache2/mod_logio.so
    LoadModule env_module libexec/apache2/mod_env.so
    #LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
    #LoadModule expires_module libexec/apache2/mod_expires.so
    LoadModule headers_module libexec/apache2/mod_headers.so
    #LoadModule usertrack_module libexec/apache2/mod_usertrack.so
    ##LoadModule unique_id_module libexec/apache2/mod_unique_id.so
    LoadModule setenvif_module libexec/apache2/mod_setenvif.so
    LoadModule version_module libexec/apache2/mod_version.so
    #LoadModule remoteip_module libexec/apache2/mod_remoteip.so
    LoadModule proxy_module libexec/apache2/mod_proxy.so
    LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
    LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
    LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
    LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
    LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
    LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so
    #LoadModule session_module libexec/apache2/mod_session.so
    #LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so
    #LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so
    LoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so
    #LoadModule ssl_module libexec/apache2/mod_ssl.so
    #LoadModule dialup_module libexec/apache2/mod_dialup.so
    LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so
    #LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so
    LoadModule unixd_module libexec/apache2/mod_unixd.so
    #LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so
    #LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so
    #LoadModule dav_module libexec/apache2/mod_dav.so
    LoadModule status_module libexec/apache2/mod_status.so
    LoadModule autoindex_module libexec/apache2/mod_autoindex.so
    #LoadModule asis_module libexec/apache2/mod_asis.so
    #LoadModule info_module libexec/apache2/mod_info.so
    #LoadModule cgi_module libexec/apache2/mod_cgi.so
    #LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
    #LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so
    #LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
    LoadModule negotiation_module libexec/apache2/mod_negotiation.so
    LoadModule dir_module libexec/apache2/mod_dir.so
    #LoadModule imagemap_module libexec/apache2/mod_imagemap.so
    #LoadModule actions_module libexec/apache2/mod_actions.so
    #LoadModule speling_module libexec/apache2/mod_speling.so
    #LoadModule userdir_module libexec/apache2/mod_userdir.so
    LoadModule alias_module libexec/apache2/mod_alias.so
    LoadModule rewrite_module libexec/apache2/mod_rewrite.so
    LoadModule php5_module libexec/apache2/libphp5.so
    #LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so

    
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.  
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    User _www
    Group _www

    

    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    #  definition.  These values also provide defaults for
    # any  containers you may define later in the file.
    #
    # All of these directives may appear inside  containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. admin@your-domain.com
    #
    ServerAdmin you@example.com

    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    #ServerName www.wdfxy.com:80

    #
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other 
    #  blocks below.
    #
    
        Options FollowSymLinks
        AllowOverride None
        Order deny,allow
        allow from all  
    

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/Users/Fido/Desktop/php"
    
        #
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        #
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        #
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.4/mod/core.html#options
        # for more information.
        #
        Options FollowSymLinks Multiviews
        MultiviewsMatch Any

        #
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   AllowOverride FileInfo AuthConfig Limit
        #
        AllowOverride None
        Allow from all    
        #
        # Controls who can get stuff from this server.
        #
        Require all granted
        
        #
        # Controls who can get stuff from this server.
        #
        #   onlineoffline tag - don't remove
        
           Order Deny,Allow
           #Deny from all

        #Allow from 127.0.0.1
        Allow from all

    

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    
        DirectoryIndex index.html  index.php
    

    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    
        Require all denied
    

    #
    # Apple specific filesystem protection.
    #
    
        Require all denied
    
        Require all denied
    

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a 
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a 
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog "/private/var/log/apache2/error_log"

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    
        #
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        #
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common

        
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        

        #
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a 
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per- access logfiles, transactions will be
        # logged therein and *not* in this file.
        #
        CustomLog "/private/var/log/apache2/access_log" common

        #
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #
        #CustomLog "/private/var/log/apache2/access_log" combined
    
        #
        # Redirect: Allows you to tell clients about documents that used to 
        # exist in your server's namespace, but do not anymore. The client 
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://www.example.com/bar

        #
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        #
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a  section to allow access to
        # the filesystem path.

        #
        # ScriptAlias: This controls which directories contain server scripts. 
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        #
        ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"

    
        #
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #
        #Scriptsock cgisock
    

    #
    # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    
        AllowOverride None
        Options None
        Require all granted
    
        #
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        #
        TypesConfig /private/etc/apache2/mime.types

        #
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #
        #AddType application/x-gzip .tgz
        #
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        #
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        #
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz

        #
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        #
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #
        #AddHandler cgi-script .cgi





        # For type maps (negotiated resources):
        #AddHandler type-map var

        #
        # Filters allow you to process content before it is sent to the client.
        #
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile /private/etc/apache2/magic

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    #

    #
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited

    #
    # EnableMMAP and EnableSendfile: On systems that support it, 
    # memory-mapping or the sendfile syscall may be used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted 
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #
    #EnableMMAP off
    #EnableSendfile on

    TraceEnable off

    # Supplemental configuration
    #
    # The configuration files in the /private/etc/apache2/extra/ directory can be 
    # included to add extra features or to modify the default configuration of 
    # the server, or you may simply copy their contents here and change as 
    # necessary.

    # Server-pool management (MPM specific)
    Include /private/etc/apache2/extra/httpd-mpm.conf

    # Multi-language error messages
    #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf

    # Fancy directory listings
    Include /private/etc/apache2/extra/httpd-autoindex.conf

    # Language settings
    #Include /private/etc/apache2/extra/httpd-languages.conf

    # User home directories
    #Include /private/etc/apache2/extra/httpd-userdir.conf

    # Real-time info on requests and configuration
    #Include /private/etc/apache2/extra/httpd-info.conf

    # Virtual hosts
    Include /private/etc/apache2/extra/httpd-vhosts.conf

    # Local access to the Apache HTTP Server Manual
    #Include /private/etc/apache2/extra/httpd-manual.conf

    # Distributed authoring and versioning (WebDAV)
    #Include /private/etc/apache2/extra/httpd-dav.conf

    # Various default settings
    #Include /private/etc/apache2/extra/httpd-default.conf

    # Configure mod_proxy_html to understand HTML4/XHTML1
    
    Include /private/etc/apache2/extra/proxy-html.conf
    

    # Secure (SSL/TLS) connections
    #Include /private/etc/apache2/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    #
    
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    

    Include /private/etc/apache2/other/*.conf

    #
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #
    #
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #
    #
    #RequestHeader unset DNT env=bad_DNT
    #

web 根目录 和 log 文件目录权限设置 调过吗?都有给_www 读写吗?

1 你是不是用的集成环境,如果是 它上面有个 上线和下线的开关 你这个比较像 开关没开
2 你改文件的时候先打印phpinfo 看看你改的文件是不是对应的文件

首先你先确定一下现在的状况,forbidden了,那么你现在得到的状态码应该是403
一般来讲,很可能是因为 /Users/Fido/Desktop/php的权限不够
但是建议你 去查一下自己到底遇见了什么问题,这样在下次这就不是问题了:看一下 /private/var/log/apache2/localhost-error_log对应的日志信息和日志这里的权限

也可以先关了 Include httpd-vhosts这一句,然后再ServerRoot的位置新建一个文件测试一下打印phpinfo

相关标签: php