自定义配置网络ip、网关、dns的批处理文件
程序员文章站
2022-04-10 19:00:34
自定义配置网络ip、网关、dns.bat复制代码 代码如下:@echo off set slection1= set/p slection1=...
自定义配置网络ip、网关、dns.bat
@echo off
set slection1=
set/p slection1=请输入ip地址:
netsh interface ip set address name="本地连接" source=static addr=%slection1% mask=255.255.255.0
set slection2=
set/p slection2=请输入网关地址:
netsh interface ip set address name="本地连接" gateway=%slection2% gwmetric=0
set slection3=
set/p slection3=请输入主dns地址
netsh interface ip set dns name="本地连接" source=static addr=%slection3% register=primary
set slection4=
set/p slection4=请输入备份dns地址
netsh interface ip add dns name="本地连接" addr=%slection4%
netsh interface ip set wins name="本地连接" source=static addr=none
pause
复制代码 代码如下:
@echo off
set slection1=
set/p slection1=请输入ip地址:
netsh interface ip set address name="本地连接" source=static addr=%slection1% mask=255.255.255.0
set slection2=
set/p slection2=请输入网关地址:
netsh interface ip set address name="本地连接" gateway=%slection2% gwmetric=0
set slection3=
set/p slection3=请输入主dns地址
netsh interface ip set dns name="本地连接" source=static addr=%slection3% register=primary
set slection4=
set/p slection4=请输入备份dns地址
netsh interface ip add dns name="本地连接" addr=%slection4%
netsh interface ip set wins name="本地连接" source=static addr=none
pause
上一篇: 网络PING包查询