H3C静态路由实验配置实验解析

实验拓扑

---

实验需求

1. 给PC5配置IP地址为10.6.1.2；PC5的网关为的r1路由器G0/0端口的IP地址10.6.1.1
2. 给PC6配置IP地址为10.6.5.2；PC6的网关为的r4路由器G0/0端口的IP地址10.6.5.1
3. 如扑拓图所示，给路由器的各个端口配置相对应的IP地址

---

实验解法

1. 路由器配置IP地址

r1

 <H3C>system-view
[H3C]sys r1
[r1]interface GigabitEthernet 0/0
[r1-GigabitEthernet0/0]ip address 10.6.1.1 24
[r1-GigabitEthernet0/0]exit
[r1]interface GigabitEthernet 0/1
[r1-GigabitEthernet0/1]ip address 10.6.2.1 24
<r1>system-view
//ip route-static 目标网段 子网掩码 出口端口IP地址
//出口端口IP地址是指当前网段进入其它网段，经过的最后的端口IP地址
[r1]ip route-static 10.6.3.0 255.255.255.0 10.6.2.2
[r1]ip route-static 10.6.4.0 255.255.255.0 10.6.2.2
[r1]ip route-static 10.6.5.0 255.255.255.0 10.6.2.2

r2

<H3C>system-view
[H3C]interface GigabitEthernet 0/0
[H3C-GigabitEthernet0/0]ip address 10.6.2.2 24
[H3C-GigabitEthernet0/0]exit
[H3C]interface GigabitEthernet 0/1
[H3C-GigabitEthernet0/1]ip address 10.6.3.1 24
<H3C>system-view
[H3C]ip route-static 10.6.1.0 255.255.255.0 10.6.2.1
[H3C]ip route-static 10.6.4.0 255.255.255.0 10.6.3.2
[H3C]ip route-static 10.6.5.0 255.255.255.0 10.6.3.2

r3

<H3C>sys
[H3C]interface GigabitEthernet 0/0
[H3C-GigabitEthernet0/0]ip address 10.6.3.2 24
[H3C-GigabitEthernet0/0]exit
[H3C]interface GigabitEthernet 0/1
[H3C-GigabitEthernet0/1]ip address 10.6.4.1 24
<H3C>system-view
[H3C]ip route-static 10.6.1.0 255.255.255.0 10.6.3.1
[H3C]ip route-static 10.6.2.0 255.255.255.0 10.6.3.1
[H3C]ip route-static 10.6.5.0 255.255.255.0 10.6.4.2

r4

<H3C>sys
[H3C]interface GigabitEthernet 0/0
[H3C-GigabitEthernet0/0]ip address 10.6.5.1 24
[H3C-GigabitEthernet0/0]exit
[H3C]interface GigabitEthernet 0/1
[H3C-GigabitEthernet0/1]ip address 10.6.4.2 24
[H3C-GigabitEthernet0/1]quit
[H3C]ip route-static 10.6.1.0 255.255.255.0 10.6.4.1
[H3C]ip route-static 10.6.2.0 255.255.255.0 10.6.4.1
[H3C]ip route-static 10.6.3.0 255.255.255.0 10.6.4.1

2. 实验结果
   PC5ping通PC6
   PC6ping通PC5