Thrift 安装与使用

Thrift

安装

Building Apache Thrift on CentOS 7

Starting with a minimal installation, the following steps are required to build Apache Thrift on Centos 7. This example builds from source, using the current development master branch. These instructions should also work with Apache Thrift releases beginning with 0.9.2.

Update the System

sudo yum -y update

Install the Platform Development Tools

sudo yum install -y wget

Upgrade autoconf/automake/bison

sudo yum install -y wget

Upgrade autoconf

wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz
tar xvf autoconf-2.69.tar.gz
cd autoconf-2.69
./configure --prefix=/usr
make
sudo make install
cd ..

Upgrade automake

wget http://ftp.gnu.org/gnu/automake/automake-1.14.tar.gz
tar xvf automake-1.14.tar.gz
cd automake-1.14
./configure --prefix=/usr
make
sudo make install
cd ..

Upgrade bison

wget http://ftp.gnu.org/gnu/bison/bison-2.5.1.tar.gz
tar xvf bison-2.5.1.tar.gz
cd bison-2.5.1
./configure --prefix=/usr
make
sudo make install
cd ..

Add Optional C++ Language Library Dependencies

All languages require the Apache Thrift IDL Compiler and at this point everything needed to make the IDL Compiler is installed (if you only need the compiler you can skip to the Build step).

If you will be developing Apache Thrift clients/servers in C++ you will also need additional packages to support the C++ shared library build.

Install C++ Lib Dependencies

sudo yum -y install libevent-devel zlib-devel openssl-devel

Upgrade Boost >= 1.53

wget http://sourceforge.net/projects/boost/files/boost/1.53.0/boost_1_53_0.tar.gz
tar xvf boost_1_53_0.tar.gz
cd boost_1_53_0
./bootstrap.sh
sudo ./b2 install

Build and Install the Apache Thrift IDL Compiler

git clone https://git-wip-us.apache.org/repos/asf/thrift.git
cd thrift
./bootstrap.sh
./configure --with-lua=no
make
sudo make install

This will build the compiler (thrift/compiler/cpp/thrift --version) and any language libraries supported. The make install step installs the compiler on the path: /usr/local/bin/thrift You can use the ./configure --enable-libs=no switch to build the Apache Thrift IDL Compiler only without lib builds. To run tests use “make check”.

---

使用方法

Writing a .thrift file

After the Thrift compiler is installed you will need to create a .thrift file. This file is an interface definition made up of thrift types and Services. The services you define in this file are implemented by the server and are called by any clients.

Generate Thrift file to source code

The Thrift compiler is used to generate your Thrift file into source code which is used by the different client libraries and the server you write. To generate the source from a Thrift file run

thrift --gen <language> <Thrift filename>

To recursivly generate source code from a Thrift file and all other Thrift files included by it, run

thrift -r --gen <language> <Thrift filename>

The sample tutorial.thrift file defines a basic calculator service. This sample calculator service .thrift file includes another file called shared.thrift. Both files will be used to demonstrate how to build a Thrift client and server pair.

示例

shared.thrift

/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements. See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership. The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License. You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied. See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */

/**
 * This Thrift file can be included by other Thrift files that want to share
 * these definitions.
 */

namespace cl shared
namespace cpp shared
namespace d share // "shared" would collide with the eponymous D keyword.
namespace dart shared
namespace java shared
namespace perl shared
namespace php shared
namespace haxe shared
namespace netcore shared

struct SharedStruct {
  1: i32 key
  2: string value
}

service SharedService {
  SharedStruct getStruct(1: i32 key)
}

tutorial.thrift

/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements. See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership. The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License. You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied. See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */

# Thrift Tutorial
# Mark Slee ([email protected])
#
# This file aims to teach you how to use Thrift, in a .thrift file. Neato. The
# first thing to notice is that .thrift files support standard shell comments.
# This lets you make your thrift file executable and include your Thrift build
# step on the top line. And you can place comments like this anywhere you like.
#
# Before running this file, you will need to have installed the thrift compiler
# into /usr/local/bin.

/**
 * The first thing to know about are types. The available types in Thrift are:
 *
 *  bool        Boolean, one byte
 *  i8 (byte)   Signed 8-bit integer
 *  i16         Signed 16-bit integer
 *  i32         Signed 32-bit integer
 *  i64         Signed 64-bit integer
 *  double      64-bit floating point value
 *  string      String
 *  binary      Blob (byte array)
 *  map<t1,t2>  Map from one type to another
 *  list<t1>    Ordered list of one type
 *  set<t1>     Set of unique elements of one type
 *
 * Did you also notice that Thrift supports C style comments?
 */

// Just in case you were wondering... yes. We support simple C comments too.

/**
 * Thrift files can reference other Thrift files to include common struct
 * and service definitions. These are found using the current path, or by
 * searching relative to any paths specified with the -I compiler flag.
 *
 * Included objects are accessed using the name of the .thrift file as a
 * prefix. i.e. shared.SharedObject
 */
include "shared.thrift"

/**
 * Thrift files can namespace, package, or prefix their output in various
 * target languages.
 */

namespace cl tutorial
namespace cpp tutorial
namespace d tutorial
namespace dart tutorial
namespace java tutorial
namespace php tutorial
namespace perl tutorial
namespace haxe tutorial
namespace netcore tutorial

/**
 * Thrift lets you do typedefs to get pretty names for your types. Standard
 * C style here.
 */
typedef i32 MyInteger

/**
 * Thrift also lets you define constants for use across languages. Complex
 * types and structs are specified using JSON notation.
 */
const i32 INT32CONSTANT = 9853
const map<string,string> MAPCONSTANT = {'hello':'world', 'goodnight':'moon'}

/**
 * You can define enums, which are just 32 bit integers. Values are optional
 * and start at 1 if not supplied, C style again.
 */
enum Operation {
  ADD = 1,
  SUBTRACT = 2,
  MULTIPLY = 3,
  DIVIDE = 4
}

/**
 * Structs are the basic complex data structures. They are comprised of fields
 * which each have an integer identifier, a type, a symbolic name, and an
 * optional default value.
 *
 * Fields can be declared "optional", which ensures they will not be included
 * in the serialized output if they aren't set.  Note that this requires some
 * manual management in some languages.
 */
struct Work {
  1: i32 num1 = 0,
  2: i32 num2,
  3: Operation op,
  4: optional string comment,
}

/**
 * Structs can also be exceptions, if they are nasty.
 */
exception InvalidOperation {
  1: i32 whatOp,
  2: string why
}

/**
 * Ahh, now onto the cool part, defining a service. Services just need a name
 * and can optionally inherit from another service using the extends keyword.
 */
service Calculator extends shared.SharedService {

  /**
   * A method definition looks like C code. It has a return type, arguments,
   * and optionally a list of exceptions that it may throw. Note that argument
   * lists and exception lists are specified using the exact same syntax as
   * field lists in struct or exception definitions.
   */

   void ping(),

   i32 add(1:i32 num1, 2:i32 num2),

   i32 calculate(1:i32 logid, 2:Work w) throws (1:InvalidOperation ouch),

   /**
    * This method has a oneway modifier. That means the client only makes
    * a request and does not listen for any response at all. Oneway methods
    * must be void.
    */
   oneway void zip()

}

/**
 * That just about covers the basics. Take a look in the test/ folder for more
 * detailed examples. After you run this file, your generated code shows up
 * in folders with names gen-<language>. The generated code isn't too scary
 * to look at. It even has pretty indentation.
 */

参考资料

• tutorial