VIP不能正常启动,报错CRS-1006
VIP不能正常启动描述:我们的环境是2节点RAC,节点1发生物理故障造成宕机。此时我想将节点1的VIP从节点2上启动,以便单节点对用户
VIP不能正常启动
描述:我们的环境是2节点RAC,节点1发生物理故障造成宕机。
此时我想将节点1的VIP从节点2上启动,以便单节点对用户程序透明。
[Oracle@UNID02 ~]$ crs_start ora.unid01.vip
Attempting to start `ora.unid01.vip` on member `UNID02`
Start of `ora.unid01.vip` on member `UNID02` failed.
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.unid01.vip'.
[oracle@UNID02 ~]$
但是启动的时候报错CRS-1006: No more members to consider。
查看VIP日志(位于$CRS_HOME/log/
2013-12-10 09:50:26.877: [ RACG][2345793472] [16627][2345793472][ora.unid01.vip]: checkIf: interface eth0 is down
Invalid parameters, or failed to bring up VIP (host=UNID02) ==============================>
2013-12-10 09:50:26.877: [ RACG][2345793472] [16627][2345793472][ora.unid01.vip]: clsrcexecut: cmd = /oracle/app/11gR1/crs/bin/racgeut -e _USR_ORA_DEBUG=0 54 /oracle/app/11gR1/crs/bin/racgvip start unid01
2013-12-10 09:50:26.877: [ RACG][2345793472] [16627][2345793472][ora.unid01.vip]: clsrcexecut: rc = 1, time = 3.130s
2013-12-10 09:50:30.010: [ RACG][2345793472] [16627][2345793472][ora.unid01.vip]: clsrcexecut: cmd = /oracle/app/11gR1/crs/bin/racgeut -e _USR_ORA_DEBUG=0 54 /oracle/app/11gR1/crs/bin/racgvip check unid01
2013-12-10 09:50:30.010: [ RACG][2345793472] [16627][2345793472][ora.unid01.vip]: clsrcexecut: rc = 1, time = 3.130s
2013-12-10 09:50:30.010: [ RACG][2345793472] [16627][2345793472][ora.unid01.vip]: end for resource = ora.unid01.vip, action = start, status = 1, time = 6.280s
013-12-10 01:17:41.966: [ COMMCRS][1472985408]clsc_receive: (0x2aaaac1428c0) error 2
2013-12-10 09:50:23.702: [ CRSRES][1538058560] startRunnable: setting CLI values
2013-12-10 09:50:23.705: [ CRSRES][1538058560] Attempting to start `ora.unid01.vip` on member `UNID02`
2013-12-10 09:50:30.012: [ CRSAPP][1538058560] StartResource error for ora.unid01.vip error code = 1
2013-12-10 09:50:33.198: [ CRSRES][1538058560] Start of `ora.unid01.vip` on member `UNID02` failed.
2013-12-10 09:50:33.204: [ CRSRES][1538058560] CRS-1006: No more members to consider
通过srvctl查看发现UNID02-vip的绑定网卡为eth2,而unid01-vip绑定网卡为eth0.
[oracle@UNID02 ~]$ srvctl config nodeapps -n UNID02 -a -g -s -l
VIP exists.: /UNID02-vip/10.0.15.176/255.255.255.0/eth2
GSD exists.
ONS daemon exists.
Listener exists.
[oracle@UNID02 ~]$ srvctl config nodeapps -n unid01 -a -g -s -l
VIP exists.: /unid01-vip/10.0.15.175/255.255.255.0/eth0
GSD exists.
ONS daemon exists.
Listener exists.
ifconfig查看发现eth0没有开启
[oracle@UNID02 ~]$
[root@UNID02 bin]# ifconfig
eth1 Link encap:Ethernet HWaddr A4:BA:DB:13:EA:C2
inet addr:192.168.127.102 Bcast:192.168.127.255 Mask:255.255.255.0
inet6 addr: fe80::a6ba:dbff:fe13:eac2/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:53 errors:0 dropped:0 overruns:0 frame:0
TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8246 (8.0 KiB) TX bytes:6848 (6.6 KiB)
Interrupt:122 Memory:d8000000-d8012800
eth2 Link encap:Ethernet HWaddr A4:BA:DB:13:EA:C4
inet addr:10.0.15.172 Bcast:10.0.15.255 Mask:255.255.255.0
inet6 addr: fe80::a6ba:dbff:fe13:eac4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5778770 errors:0 dropped:0 overruns:0 frame:0
TX packets:2798242 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1493987596 (1.3 GiB) TX bytes:1004608379 (958.0 MiB)
Interrupt:130 Memory:da000000-da012800
eth2:1 Link encap:Ethernet HWaddr A4:BA:DB:13:EA:C4
inet addr:10.0.15.176 Bcast:10.0.15.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:130 Memory:da000000-da012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:921339 errors:0 dropped:0 overruns:0 frame:0
TX packets:921339 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:417953992 (398.5 MiB) TX bytes:417953992 (398.5 MiB)
[root@UNID02 bin]#
推荐阅读
-
VIP不能正常启动,报错CRS-1006
-
解决OracleDBConsoleorcl不能启动,报错误码
-
PHP 一直报错.而且还不能正常访问.这是什么情况PHP Warning: mysqli::mysqli()(HY000/2003)
-
mamp pro for mac 第二次安装后 不能启动也不报错 参数都是默认的我没改,为什么?
-
DG不能自动mount导致数据库不能正常启动:ORA-01157、ORA-01110、ORA-17503、ORA-150
-
关于Vmware Workstation虚拟机与Docker不能正常启动的解决方案
-
计算机名称修改后Oracle不能正常启动问题分析及解决
-
解决xmapp中Apache端口号占用问题(Apache不能正常启动)
-
计算机名称修改后Oracle不能正常启动问题分析及解决
-
tomact正常启动,但是在日志文件报错java.lang.NoClassDefFoundError: java/util/logging/Logger