EPOEN彩激8500C/8600C维修代码

e 113 无定影器
e 510 激光器棱镜电机故障
e 511 电机 1 故障
e 512 p/h 电机故障
e 513 nvram 故障
e 516 双面单元故障(通信故障)
e 517 可选纸盒故障
e 520 二次转印故障(advance)
e 521 二次转印故障
e 523 pcdc 故障
e 524 碳粉浓度过低
e 525 碳粉浓度过高
e 526 adc 传感器脏
e 527 显影原位传感器故障
e 530 环境(湿度)传感器故障
e 531 pr 电机故障
e 532 p/h 电机2 故障
e 533 温度传感器故障
e 534 定影器故障(低温)
e 535 定影器故障(灯管)
e 536 定影器故障(超时)
e 537 定影器故障(过热)
e 543 后部风扇故障
e 544 定影器风扇2故障
e 545 定影器风扇1故障
e 546 双面单元电机故障
e 547 可选纸盒进纸电机故障
e 620 k 显影器寿命已到
e 621 c 显影器寿命已到
e 622 m 显影器寿命已到
e 623 y 显影器寿命已到
e 624 转印皮带寿命已到
e 626 二次转印组件寿命已到
e 627 皮带刮板寿命已到
e 830 可选大容量纸盒lc3故障
e 831 可选纸盒lc2故障
e 832 多功能纸盒故障(下降)
e 833 多功能纸盒故障(抬起)
e 998 引擎通信错

英文版

521 2nd btr error fip-1.27 “2nd btr error” (p.220)
523 pcdc malfunction fip-1.25 “pcdc error” (p.219)
524 toner density error (low density) fip-1.24 “low density error” (p.218)
525 toner density error (high density) fip-1.23 “high density error” (p.217)
526 soiled adc sensor fip-1.22 “adc sensor soiled”
(p.217)
527 deve home position sensor error -
530 environment (humidity) sensor error fip-1.31 “environment (humidity)
sensor related error” (p.224)
531 pr motor error fip-1.19 “p/r mot&drv assy
related error” (p.214)
532 p/h motor 2 error " fip-1.15 “p/h motor assy
related error” (p.210)
533 temperature sensor error fip-1.29 “fuser overheat error”
(p.222)
534 fuser unit error (low temperature) fip-1.30 “fuser warm-up error” /
“heater error”/ “fuser low
temperature error” (p.223)
535 fuser unit error (heater lamp) fip-1.30 “fuser warm-up error” /
“heater error”/ “fuser low
temperature error” (p.223)
536 fuser unit error (time out) fip-1.30 “fuser warm-up error” /
“heater error”/ “fuser low
temperature error” (p.223)
537 fuser unit error (over heat) fip-1.29 “fuser overheat error”
(p.222)
543 rear fan error fip-1.34 “deve. fan error” (p.225)
table 3-3. service call errors (engine related) (continued)
errorcode
ggg
explanation refer to
544 fuser unit fan 2 error fip-1.33 “fuser chute fan
error” (p.225)
545 fuser unit fan 1 error fip-1.32 “fuser fan-1 error”
(p.224)
546 duplex unit motor error *3
547 2/1 optional cassette unit feeder motor
error
*3
620 k development end fip-1.35 “life error/over/warning”
(p.226)
621 c development end fip-1.35 “life error/over/warning”
(p.226)
622 m development end fip-1.35 “life error/over/warning”
(p.226)
623 y development end fip-1.35 “life error/over/warning”
(p.226)
624 ibt end fip-1.35 “life error/over/warning”
(p.226)
626 2nd btr end fip-1.35 “life error/over/warning”
(p.226)
627 ibt cleaner end fip-1.35 “life error/over/warning”
(p.226)
830 2 optional cassette unit lc3 error (lift up) *3
831 1/2 optional cassette unit lc2 error (lift
up)
*3
832 mp tray error (lift down) fip-1.44 “msi tray malfunction (lift
down)” (p.232)
833 mp tray error (lift up) fip-1.43 “msi tray malfunction (lift
up)” (p.231)
998 engine communication error fip-1.47 engine communication
error (p.234)
table 3-3. service call errors (engine related) (continued)
error
code
ggg
explanation refer to