欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  网络运营

LNMP自动安装部署脚本

程序员文章站 2023-09-03 15:35:00
我们的业务使用了nginx、mysql、php、和tomcat,写了一个自动化安装这些软件的脚本,虽然网上类似的自动安装脚本很多,但这个是自己写的,特此mark一下,希望能...

我们的业务使用了nginx、mysql、php、和tomcat,写了一个自动化安装这些软件的脚本,虽然网上类似的自动安装脚本很多,但这个是自己写的,特此mark一下,希望能给别人一些参考,同时也灰常欢迎看到的朋友们提些改进意见。话不多说,直接上脚本。

#!/bin/sh
  alias echo='echo -e'
  ###判断系统,此脚本只适用于64位系统
  machine=`uname -m`
  if [ $machine != x86_64 ] ;then
    echo "\e[1;31m \nyour system is 32bit,but this script is only run on 64bit !\n \e[0m"
    exit -1
  fi 
  ###创建保存下载文件的目录
  mkdir /usr/local/src/auto_install &> /dev/null
  source_dir=/usr/local/src/auto_install
  ###定义一个交互式的选择提示
function interact {
  echo "please input \"yes\" or \"no\""
  read choice
  case "$choice" in
    no)
     exit 0;;
    yes)
     echo;;
    *)
   echo "\e[1;31minput errot! \e[0m"
     exit -1;;
  esac
}
   ### 定义一个函数检查上一条命令的执行状态
function check {
  if [ $? -ne 0 ];then
    echo "\e[1;31m\n the last commond exec failed,please check it !\e[0m \n"
  sleep 1
  exit -1
  fi
}
### 定义下载各软件的函数(此处我隐藏了我们的下载地址,需各位自行设置下载地址)
function download_install_epel {
  cd $source_dir
  rm -f epel* &> /dev/null
  echo "\e[1;32m ---yum install epel repo--- \e[0m \n"    
  sys_version=`uname -r|cut -d '.' -f 4`
  if [ $sys_version = el7 ];then
    rpm -qa|grep -i epel > /dev/null
    if [ $? -ne 0 ];then
     wget -nv http://www.example.com/epel-release-7-2.noarch.rpm
     rpm -ivh $source_dir/epel-release-7-1.noarch.rpm
     check;
    fi
  elif [ $sys_version = el6 ];then
    rpm -qa|grep -i epel > /dev/null
    if [ $? -ne 0 ];then
     wget -nv http://www.example.com/epel-release-6-8.noarch.rpm
     rpm -ivh $source_dir/epel-release-6-8.noarch.rpm
     check;
    fi
  fi
}
function download_nginx {
  cd $source_dir
  echo "\e[1;32m\n ---download nginx-1.4.7---\e[0m \n"
  ls nginx-1.4.7.tar.gz &> /dev/null
  if [ $? -ne 0 ];then
     wget -nv http://www.example.com/nginx-1.4.7.tar.gz
     check;
  fi
}
function download_mysql {
  cd $source_dir
  echo "\e[1;32m\n ---download mysql-5.5.39---\e[0m \n"
  ls mysql-5.5.39-linux2.6-x86_64.tar.gz &> /dev/null
  if [ $? -ne 0 ];then
     wget -nv http://www.example.com/mysql-5.5.39-linux2.6-x86_64.tar.gz
     check;
  fi
}
function download_php {
  cd $source_dir
  echo "\e[1;32m\n ---download php-5.3.28---\e[0m \n"
  ls php-5.3.28.tar.gz &> /dev/null
  if [ $? -ne 0 ];then
      wget -nv http://www.example.com/php-5.3.28.tar.gz
      check;
  fi
}
function download_jre {
  cd $source_dir
  echo "\e[1;32m ---download jre-6u33-linux-x64.bin---\e[0m"
  sleep 1
  ls jre-6u33-linux-x64.bin &> /dev/null
  if [ $? -ne 0 ];then
    wget -nv http://www.example.com/jre-6u33-linux-x64.bin
    check;
  fi
}
    ###定义依赖包安装函数
function dependence_install {
  download_install_epel;
  echo "\e[1;32m ---yum install the dependencies software--- \e[0m \n" 
  sleep 1
  pgrep yum|xargs kill -9 > /dev/null
  rm -f /var/run/yum.pid > /dev/null
  echo "yum install gcc zlib cmake libxml2 libxml2-devel bzip2 bzip2-devel curl curl-devel libjpeg libjpeg-devel libpng libpng-devel freetype-devel pspell-devel libmcrypt libm
crypt-devel freetype pcre-devel openssl openssl-devel libaio*"
  yum -y install gcc zlib cmake libxml2 libxml2-devel bzip2 bzip2-devel curl curl-devel libjpeg libjpeg-devel libpng libpng-devel freetype-devel pspell-devel libmcrypt libmcry
pt-devel freetype pcre-devel openssl openssl-devel libaio* >/dev/null 2>&1
  check;
}
    ### 定义mysql安装函数###
function mysql_install {

    ###判断本机是否已在运行mysql,或者开机启动项有没有mysql###
    ###判断机器上是否以运行mysql实例
  echo "\e[1;32m \n ---check if there is already installed mysql instence---\e[0m\n"
  ps -ef|grep -w mysqld|grep -v "grep" &> /dev/null
  if [ $? -eq 0 ];then
    mysqlbasedir=`ps -ef|grep -w "mysqld"|grep -v "grep"|awk '{print $9}'|tr -d '\-\-'`
    mysqldatadir=`ps -ef|grep -w "mysqld"|grep -v "grep"|awk '{print $10}'|tr -d '\-\-'`
    echo "\e[1;32m your system has run a mysql instance already \n mysqlbasedir is: "$mysqlbasedir"\n mysqldatadir is: "$mysqldatadir"\n do you still want to install a new mysql-server? \e[0m\n"
    interact;
  fi
    ###判断系统是否已经有rpm方式安装的mysql
   echo "mysql-server-5.5.39-2.el6.x86_64.rpm"|while read line
   do
     prefix=`echo "$line"|awk -f "-" '{print $1"-"$2}'`               ##to get like "mysql-server"
     rpm -qa|grep -i "$prefix" &> /tmp/check_mysql.log
   if [ $? -eq 0 ];then
      already_install=`cat /tmp/check_mysql.log|awk -f "-" '{print $1"-"$2"-"$3}'`  ##to get the already installed mysql version
      echo "\e[1;31m ---the $already_install is already installed by rpm!--- \n ---do you really want to install a new mysql?--- \e[0m\n"
      interact;
     fi
   done
    ###判断chkconfig里面是否有mysql启动脚本并且为开机启动
  chkconfig |grep mysql|awk '{print $5" "$7}'|grep -e "启用" -e "on" &> /dev/null
  if [ $? -eq 0 ];then
    echo " there is a bootstart mysql script in the chkconfig,please check"
    exit 0
  fi

    ###判断/etc/rc.local文件里是否有mysql启动命令
  cat /etc/rc.local|grep "mysqld" &> /dev/null
  if [ $? -eq 0 ];then
    echo " there is a bootstart mysql commond in the /etc/rc.local,please check it"
    exit 0
  fi  
    ######判断结束######

  ###检查是否有系统自带的mysql-lib-5.1,有则删除
  rpm -qa|grep -i -e "mysql.*5\.1.*"|xargs rpm -e --nodeps 2> /dev/null
    ###交互式选择mysql安装路径
  echo "\e[1;31m where do you want to install mysql(default is /usr/local/mysql)\e[0m"
  read mybasedir
  if [ "$mybasedir" = "" ];then
    mybasedir=/usr/local/mysql
  fi
    ###选择data目录
  echo "\e[1;31m where do you want to storage mysql data(default is /usr/local/mysql/data)\e[0m"
  read mydatadir
  if [ "$mydatadir" = "" ];then
    mydatadir=/usr/local/mysql/data
  fi  

    ###开始安装mysql
  echo "\e[1;32m ---now start to install mysql---\e[0m\n"
  sleep 1
  #dependence_install;
  echo "\e[1;32m ---add user mysql---\e[0m"
  useradd mysql -s /sbin/nologin

  echo "\e[1;32m\n ---unpack mysql-5.5.39-linux2.6-x86_64.tar.gz---\e[0m"
  cd $source_dir
  tar zxf mysql-5.5.39-linux2.6-x86_64.tar.gz
  check;
  rm -rf $mybasedir
  mv mysql-5.5.39-linux2.6-x86_64 $mybasedir

    ###判断/etc下是否有my.cnf,若有,重命名为my.cnf.bak
  ls /etc/my.cnf &> /dev/null
  if [ $? = 0 ];then
    \mv /etc/my.cnf /etc/my.cnf.bak
    echo "\e[1;32m\n ---detected /etc/my.cnf is already exit,rename it to /etc/my.cnf.bak--- \e[0m \n"
  fi
  cp $mybasedir/support-files/my-huge.cnf /etc/my.cnf
    ###拷贝开机启动脚本到/etc/init.d/
  ls /etc/init.d/mysql &> /dev/null
  if [ $? = 0 ];then
    \mv /etc/init.d/mysql /etc/init.d/mysql.bak
    echo "\e[1;32m ---detected /etc/init.d/mysql is already exit,rename it to /etc/init.d/mysql.bak---\e[0m"
  fi
  cp $mybasedir/support-files/mysql.server /etc/init.d/mysql
    ###修改/etc/init.d/mysql脚本里面basedir和datadir
  sed -i -e "/^basedir*=$/i\basedir=$mybasedir" -e "/^datadir*=$/i\datadir=$mydatadir" /etc/init.d/mysql
  sed -i -e '/^basedir*=$/d' -e '/^datadir*=$/d' /etc/init.d/mysql  
    ###初始化数据库
  echo "\e[1;32m\n ---initialize mysql database---\e[0m"
  sleep 1
  chown -r mysql $mydatadir $mybasedir >/dev/null 2>&1
  $mybasedir/scripts/mysql_install_db --defaults-file=/etc/my.cnf --user=mysql --basedir=$mybasedir --datadir=$mydatadir
  check;
    ###将basedir/bin/添加到path
  echo "path=$path:$mybasedir/bin" >> /etc/profile
  export path=$path:$mybasedir/bin

  echo "\e[1;32m install mysql success,you can run \"service mysql start\" to start the mysql \n do not forget to set a password for mysql \e[0m"
  ###至此mysql安装完毕
}
  ### 定义nginx安装函数
function nginx_install {
  echo
  echo "\e[1;32m ---start installing nginx,it's basedir is /usr/local/nginx--- \e[0m \n"
  sleep 1
  cd $source_dir
  ls -l |grep "^d"|grep nginx|xargs rm -rf &> /dev/null
  tar zxf nginx-1.4.7.tar.gz
  check;
  cd nginx-1.4.7
echo "\e[1;32m ---configure: configure information in /tmp/configure_nginx.log--- \e[0m \n"
  sleep 1
  ./configure --with-http_stub_status_module --prefix=/usr/local/nginx &> /tmp/configure_nginx.log
  check;
echo "\e[1;32m ---make: make information in /tmp/make_nginx.log--- \e[0m \n"
  sleep 1
  make &> /tmp/configure_nginx.log
  check;
echo "\e[1;32m ---make install: install into /usr/local/nginx--- \e[0m \n"
  sleep 1
  make install &> /tmp/make_install.log
  check;
  echo "\e[1;32m nginx is installed successfully \e[0m \n"
}
  ### 定义php安装函数
function php_install {
  dependence_install;
  cd $source_dir
  ls -l |grep "^d"|grep php|xargs rm -rf &> /dev/null
  tar zxvf php-5.3.28.tar.gz &> /dev/null
  check;
  cd php-5.3.28
  echo
  echo "\e[1;32m ---configure php: information in /tmp/php_configure.log--- \e[0m \n"
  echo "./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-mysql --with-mysqli --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-iconv-dir=/usr/local --with-zlib --enable-zip --with-curl"
  ./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-mysql --with-mysqli --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-iconv-dir=/usr/local --with-zlib --enable-zip --with-curl &> /tmp/php_configure.log
  check;

  ###make
  echo "\e[1;32m ---make php: information in /tmp/php_make.log--- \e[0m \n"
  make &> /tmp/php_make.log
  check;
  ###make install
  echo "\e[1;32m ---make install php: install into /usr/local/php--- \n ---php cofigure file in the /usr/local/php/etc--- \e[0m \n"
  make install > /tmp/make_install_php.log
  check;

  echo "\e[1;32m ---prepare php configure files--- \e[0m \n"
  echo "cp $source_dir/php-5.3.28/php.ini-production /usr/local/php/etc/php.ini"
  cp php.ini-production /usr/local/php/etc/php.ini
  echo "cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf"
  cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
  echo "\e[1;32m\n php is installed successfully!\n now,please start php and modification the php.ini \e[0m"
}
  ###安装jre
function jre_install {
  ###删除系统自带的java
  rpm -qa|grep java|xargs rpm -e --nodeps

  cd $source_dir
  rm -rf jre1.6.0_33 &> /dev/null
  chmod +x jre-6u33-linux-x64.bin &> /dev/null
  ./jre-6u33-linux-x64.bin >/dev/null 2>&1
  check;
  ls -d /usr/java
  if [ $? -ne 0 ];then
    mkdir /usr/java &> /dev/null
  else
    echo echo "\e[1;31m /usr/java has already exits,move to /usr/java_bak !\e[0m"
    mkdir /usr/java_bak &> /dev/null
    mv /usr/java/* /usr/java_bak/
  fi
  mv jre1.6.0_33 /usr/java/
  echo "\e[1;32m\n ---add java path to /etc/profile---\e[0m"
  sleep 1

  echo >>/etc/profile
  echo 'java_home=/usr/java/jre1.6.0_33'>>/etc/profile
  echo 'classpath=$java_home/lib/tools.jar:$java_home/jre/lib/rt.jar'>>/etc/profile
  echo 'path=$java_home/bin:$path:$home/bin:$java_home/jre/bin'>>/etc/profile
  echo 'export path java_home'>>/etc/profile
  source /etc/profile
  echo "\e[1;32m\n jre is installed success !\e[0m"
  echo "\e[1;32m\n ---install cronolog---\e[0m"
  wget -nv http://www.example.com/cronolog-1.6.2.tar.gz
  dependence_install;
  tar zxf cronolog-1.6.2.tar.gz
  cd cronolog-1.6.2
  ./configure &> /tmp/cronolog_configure.log && make > /dev/null && make install > /dev/null
  check;
  echo "\e[1;32m cronolog is installed success\e[0m\n"
}
  ###下面开始选择那些软件需要安装
echo "\e[1;31m\n ---选择哪些软件需要安装--- \e[0m \n"
echo "\e[1;32m \"nginx\"   input \"1\" \e[0m \n"
echo "\e[1;32m \"mysql\"   input \"2\" \e[0m \n"
echo "\e[1;32m \"php\"    input \"3\" \e[0m \n"
echo "\e[1;32m \"jre\"    input \"4\" \e[0m \n"
#echo "\e[1;32m \"tomcat\"   input \"5\" \e[0m \n"
read -p "please choice which software do you want to install ?" input

  if [ $input = 1 ];then
      download_nginx;
      dependence_install;
      nginx_install;
  elif [ $input = 2 ];then
    download_mysql;
      mysql_install;
  elif [ $input = 3 ];then
      echo "\e[1;32m\n php needs mysqlclient \e[0m"
      echo "\e[1;32m so if you had already install a mysqlclient\n please make a softlink for all \"libmysqlclient.so.*\" file to both /var/lib64 and /var/lib \e[0m\n"
      echo "\e[1;31m please input your choice\n\e[0m \e[1;32m1: go on by default\(install mysql-client-5.5.39\)\n 2: i will check my \"libmysqlclient.so.*\" file and redo this script later\n 3: i had make the softlinks and i want to going on \e[0m"
      read choice
      case "$choice" in
       1)
        cd $sourcedir
        echo "\e[1;32m ---download mysql-client rpm files---\e[0m"
        wget -nv http://www.example.com/mysql-client-5.5.39-2.el6.x86_64.rpm
        wget -nv http://www.example.com/mysql-devel-5.5.39-2.el6.x86_64.rpm
        wget -nv http://www.example.com/mysql-shared-5.5.39-2.el6.x86_64.rpm
        echo "\e[1;32m\n ---install mysql-client in the way of rpm---\e[0m"
        sleep 1
        rpm -ivh mysql-client-5.5.39-2.el6.x86_64.rpm mysql-devel-5.5.39-2.el6.x86_64.rpm mysql-shared-5.5.39-2.el6.x86_64.rpm
        download_php;
        ###make soft link from /usr/lib64/libmysqlclient* to /usr/lib/
        ls -l /usr/lib64/libmysqlclient*|grep -v "^l"|awk '{print $nf}'|while read line
         do
          usrlib_fulldir=`ls -l /usr/lib64/libmysqlclient*|grep -v "^l"|awk '{print $nf}'|sed 's/lib64/lib/'`
          ln -s $line $usrlib_fulldir
         done

        php_install;
        ;;
      2)
        exit 0;;
      3)
        download_php;
        php_install;
        ;;
      *)
        echo "input errot!" && exit -1;;
     esac

   elif [ $input = 4 ];then
      download_jre;
      jre_install;
   else
    echo "\e[1;31m your input is worng!\e[0m"
    sleep 1
    exit -1
   fi

以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持。