ssh keygen后登陆无效解决 ssh-keygen无效失败解决

设置无密码登陆,结果出错无效.
ssh-keygen,

错误的设置方式:
登陆到远程主机:mkdir .ssh && chmod 700 .ssh
本地:scp .ssh/id_rsa.pub root@your_remote_host
结果登陆还是提示要求输入密码.... ++ 试了好多次,权限啥的都是完全正确的...就是不行...


后来发现,正确的设置方式:
登陆到远程主机:mkdir .ssh && chmod 700 .ssh
本地:ssh-copy-id -i .ssh/id_rsa.pub root@your_remote_host
ok成功了~~

错误的设置时,ssh显示调试信息:ssh -vvv -oPreferredAuthentications=publickey root@your_remote_host
错误的调试信息如下,供参考:

引用

OpenSSH_5.2p1, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /usr/local/etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 192.168.0.113 [192.168.0.113] port 22.
debug1: Connection established.
debug1: identity file ~/.ssh/identity type -1
debug3: Not a RSA1 key file /home/gototouch/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file ~/.ssh/id_rsa type 1
debug1: identity file ~/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.2
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[e-mail]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[e-mail]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[e-mail],hmac-ripemd160,[e-mail],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[e-mail],hmac-ripemd160,[e-mail],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[e-mail],zlib
debug2: kex_parse_kexinit: none,[e-mail],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[e-mail]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[e-mail]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[e-mail],hmac-ripemd160,[e-mail],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[e-mail],hmac-ripemd160,[e-mail],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[e-mail]
debug2: kex_parse_kexinit: none,[e-mail]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 121/256
debug2: bits set: 499/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/gototouch/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 6
debug1: Host '192.168.0.113' is known and matches the RSA host key.
debug1: Found key in ~/.ssh/known_hosts:6
debug2: bits set: 522/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: ~/.ssh/id_rsa (0x15fce10)
debug2: key: [e-mail] (0x1604210)
debug2: key: ~/.ssh/identity ((nil))
debug2: key: ~/.ssh/id_dsa ((nil))
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password
debug3: preferred publickey
debug3: authmethod_lookup publickey
debug3: remaining preferred:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: ~/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug1: Offering public key: [e-mail]
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug1: Trying private key: ~/.ssh/identity
debug3: no such identity: ~/.ssh/identity
debug1: Trying private key: ~/.ssh/id_dsa
debug3: no such identity: ~/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).

后记:本人仔细看了下/usr/bin/ssh-copy-id的脚步,发现了centos的restorecon命令起的作用,测试了下如下方式也是可以有效的不用密码登陆:
远程执行:mkdir .ssh && chmod 700 .ssh
本地执行:cat ~/.ssh/id_rsa.pub | ssh root@your_host 'cat -  >> .ssh/authorized_keys'
远程执行:restorecon .ssh .ssh/authorized_keys
最后一步是成功的保证

参考:1.http://askubuntu.com/questions/54670/passwordless-ssh-not-working
2.http://www.linuxquestions.org/questions/linux-software-2/ssh-keygen-for-auto-ssh-login-not-working-929325/