欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  IT编程

Low volume plastic aftermarket auto parts manufacture

程序员文章站 2022-07-07 08:24:15
Vacuum Casting Technology is a fast molding method for producing small lot production.Mold Material is Silicone, it also called Silicone mold.Good option for discontinued auto parts producing. No matter making sample upon customer samples or making very...

Vacuum Casting Technology is a fast molding method for producing small lot production.

Mold Material is Silicone, it also called Silicone mold.
Good option for discontinued auto parts producing. No matter making sample upon customer samples or making very low volume product.

Low volume plastic aftermarket auto parts manufacture

Vacuum Casting Procedure Steps:

  1. Putting sample part into a container
  2. Add liquid silicone into container
  3. Putting them into the Vacuum furnace to get solid silicone Square.
  4. Separate silicone square piece to 2 pieces, top and bottom, as parting of injection mold
  5. Remove the sample part, then all part feature was left in the silicone pieces

Your Vacuum Casting silicone mold is ready.

  1. Preparing your assigned plastic liquid material, pour into the silicone mold
  2. In the vacuum furnace, liquid plastic filled the cavity in the silicone mold
  3. Once it was cooling, copied sample part was made

Usually, a silicone mold can make around 10+ pcs good parts, before dimension changed

•Advantage: Fast, lower cost on mold manufacture and small lot production

•Mold Raw Material : Liquid Silicone

•Production Material: All Plastic, especially for Rubber and Silicone parts.

•Usage:

Research & Development of new products (work with 3D printing sample)

Copy current product

Low volume plastic aftermarket auto parts manufacture

本文地址:https://blog.csdn.net/Wintenauto/article/details/109253373