使特定网段用户能*上传下载

 本人系菜鸟一个，前一段突发奇想做了以下的试验，现在问题解决了，把解决的方法总结一下，谨供参考，希望能给像我一样的菜鸟有所帮助。第一次写总结，总有如履薄冰，如临深渊的感觉，生怕误导别人。其中一定会有不妥或是错误，或者如果大家有什么更好的方法，希望大家提出来一起讨论。
解决过程中不少兄弟热情帮助尤其是wolfg斑竹的大力支持，十分感谢。

说明：在fc3上用vsftp实ftp服务。由于一些网段的用户为内部成员，不会对服务器造成危害。为了减少麻烦，更好地实现资源共享，现在想给他们的网段（本例中以10.0.1.*为例）的用户以*上传下载的权利。

涉及的配置文件一共有四个：
vsftpd.conf
hosts.allow
/etc/vsftpd/local.class
/etc/vsftpd/other.class

内容：

hosts.allow
代码:
#
# hosts.allow this file describes the names of the hosts which are
# allowed to use the local inet services, as decided
# by the '/usr/sbin/tcpd' server.
vsftpd: 10.0.1.* : setenv vsftpd_load_conf /etc/vsftpd/local.class
vsftpd: all : setenv vsftpd_load_conf /etc/vsftpd/other.class


/etc/vsftpd/local.class
代码:
write_enable=yes
anon_upload_enable=yes
anon_mkdir_write_enable=yes


/etc/vsftpd/other.class
代码:
write_enable=no
anon_upload_enable=no
anon_mkdir_write_enable=no


vsftpd.conf
代码:
# example config file /etc/vsftpd/vsftpd.conf
#
# the default compiled in settings are fairly paranoid. this sample file
# loosens things up a bit, to make the ftp daemon more usable.
# please see vsftpd.conf.5 for all compiled in defaults.
#

# read this: this example file is not an exhaustive list of vsftpd options.
# please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# allow anonymous ftp? (beware - allowed by default if you comment this out).
anonymous_enable=yes
#
# uncomment this to allow local users to log in.
# 不允许本地用户上传下载,即只允许基于ip的认证
#local_enable=yes
#
# uncomment this to enable any form of ftp write command.
# 在ftpd中的local.class和other.class文件中有write_enable=yes项
#write_enable=yes
#
# default umask for local users is 077. you may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# uncomment this to allow the anonymous ftp user to upload files. this only
# has an effect if the above global write enable is activated. also, you will
# obviously need to create a directory writable by the ftp user.
#anon_upload_enable=yes
#
# uncomment this if you want the anonymous ftp user to be able to create
# new directories.
#anon_mkdir_write_enable=yes
#
# activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=yes
#
# activate logging of uploads/downloads.
xferlog_enable=yes
#
# make sure port transfer connections originate from port 20 (ftp-data).
connect_from_port_20=yes
#
# if you want, you can arrange for uploaded anonymous files to be owned by
# a different user. note! using "root" for uploaded files is not
# recommended!
#chown_uploads=yes
#chown_username=whoever
#

# you may override where the log file goes if you like. the default is shown

# below.
xferlog_file=/var/log/vsftpd.log
#
# if you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=yes
#
# you may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# you may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# it is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# enable this and the server will recognise asynchronous abor requests. not
# recommended for security (the code is non-trivial). not enabling it,
# however, may confuse older ftp clients.
#async_abor_enable=yes
#
# by default the server will pretend to allow ascii mode but in fact ignore
# the request. turn on the below options to have the server actually do ascii
# mangling on files when in ascii mode.
# beware that turning on ascii_download_enable enables malicious remote parties
# to consume your i/o resources, by issuing the command "size /big/file" in
# ascii mode.
# these ascii options are split into upload and download because you may wish
# to enable ascii uploads (to prevent uploaded scripts etc. from breaking),
# without the dos risk of size and ascii downloads. ascii mangling should be
# on the client anyway..
#ascii_upload_enable=yes
#ascii_download_enable=yes
#
# you may fully customise the login banner string:
#ftpd_banner=welcome to blah ftp service.
#
# you may specify a file of disallowed anonymous e-mail addresses. apparently
# useful for combatting certain dos attacks.
#deny_email_enable=yes
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#

# you may specify an explicit list of local users to chroot() to their home
# directory. if chroot_local_user is yes, then this list becomes a list of
# users to not chroot().
#chroot_list_enable=yes
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# you may activate the "-r" option to the builtin ls. this is disabled by
# default to avoid remote users being able to cause excessive i/o on large
# sites. however, some broken ftp clients such as "ncftp" and "mirror" assume
# the presence of the "-r" option, so there is a strong case for enabling it.
#ls_recurse_enable=yes
anon_umask=022
pam_service_name=vsftpd
userlist_enable=yes
#下面一行是我加的
userlist_deny=yes
#enable for standalone mode
listen=yes
tcp_wrappers=yes


说明一下：
首先设置vsftpd.conf中tcp_wrappers=yes（一般的默认设置都是yes）。
当有用户访问时，则会自动查看hosts.allow的配置，而在根据hosts.allow中的语句，
系统会根据客户的ip跳转到不同的文件去，按照那里的设置工作。
在/etc/vsftpd/local.class中设置10.0.1.*网段的用户可以*上传下载。
在/etc/vsftpd/other.class中设置其他用户只有下载的权限。
就是这么简单。不过有一点必须说明：那就是目录和文件的权限问题。
首先，设置你想让匿名用户上传的目录的可写权限
再一个在
vsftpd.conf中要加上
anon_umask=022
这一行是给匿名用户上传的文件添加可读的权限。你可以测试一下，匿名用户上传的文件的权限是600，即上传上去了却没有可读权限,下载不了！

over！good luck!