apache2服务器的搭建和配置步骤详解

前言

这篇文章主要给大家介绍了在linux下apache2服务器的搭建和配置的相关资料，具有一定的参考价值，下面来一起学习学习吧。

步骤如下

首先当然是下载包包：

myths@myths-x450ld:~$ sudo apt-get install apache2

装完后就可以用了，在地址栏输入本地回送地址127.0.0.1或者localhost就可以进入到默认的界面了。

默认的界面当然就是apache2的说明界面了。其实很多情况下并不需要在网上寻找帮助文档，几乎所有的软件都会自带使用说明，只是略长，我们一般都懒得看。但是其实很多重要的东西就在这当中，比如apache2的默认界面里：

ubuntu logo apache2 ubuntu default page
it works!
this is the default welcome page used to test the correct operation of the apache2 server after installation on ubuntu systems. it is based on the equivalent page on debian, from which the ubuntu apache packaging is derived. if you can read this page, it means that the apache http server installed at this site is working properly. you should replace this file (located at /var/www/html/index.html) before continuing to operate your http server.
if you are a normal user of this web site and don't know what this page is about, this probably means that the site is currently unavailable due to maintenance. if the problem persists, please contact the site's administrator.
configuration overview
ubuntu's apache2 default configuration is different from the upstream default configuration, and split into several files optimized for interaction with ubuntu tools. the configuration system is fully documented in /usr/share/doc/apache2/readme.debian.gz. refer to this for the full documentation. documentation for the web server itself can be found by accessing the manual if the apache2-doc package was installed on this server.
the configuration layout for an apache2 web server installation on ubuntu systems is as follows:
/etc/apache2/
|-- apache2.conf
|  `-- ports.conf
|-- mods-enabled
|  |-- *.load
|  `-- *.conf
|-- conf-enabled
|  `-- *.conf
|-- sites-enabled
|  `-- *.conf
apache2.conf is the main configuration file. it puts the pieces together by including all remaining configuration files when starting up the web server.
ports.conf is always included from the main configuration file. it is used to determine the listening ports for incoming connections, and this file can be customized anytime.
configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ directories contain particular configuration snippets which manage modules, global configuration fragments, or virtual host configurations, respectively.
they are activated by symlinking available configuration files from their respective *-available/ counterparts. these should be managed by using our helpers a2enmod, a2dismod, a2ensite, a2dissite, and a2enconf, a2disconf . see their respective man pages for detailed information.
the binary is called apache2\. due to the use of environment variables, in the default configuration, apache2 needs to be started/stopped with /etc/init.d/apache2 or apache2ctl. calling /usr/bin/apache2 directly will not work with the default configuration.
document roots
by default, ubuntu does not allow access through the web browser to any file apart of those located in /var/www, public_html directories (when enabled) and /usr/share (for web applications). if your site is using a web document root located elsewhere (such as in /srv) you may need to whitelist your document root directory in /etc/apache2/apache2.conf.
the default ubuntu document root is /var/www/html. you can make your own virtual hosts under /var/www. this is different to previous releases which provides better security out of the box.
reporting problems
please use the ubuntu-bug tool to report bugs in the apache2 package with ubuntu. however, check existing bug reports before reporting a new bug.
please report bugs specific to modules (such as php and others) to respective packages, not to the web server itself.
valid xhtml 1.0 transitional

仅仅从这个文件中，我们就可以至少得到以下的重要信息：

• 当访问本机的时候，默认进入的页面是/var/www/html/index.html。
• 配置系统的说明在/usr/share/doc/apache2/readme.debian.gz中。
• 完整使用手册可以通过安装apache2-doc 进行下载。
• 主配置文件为/etc/apache2/apache2.conf。
• 启动和关闭apache2服务可以通过执行命令/etc/init.d/apache2 start（stop / restart）当然也可以是 service apache2 start (stop / restart)。这里一定要注意记得！记得！加root权限！这里不加root权限并没有明显的提示（好坑），当遇到问题的时候很难让人想到是这里出的错，所以一定要记得！记得！加root权限！
• 默认情况下apache2拒绝访问除/var/www 和/usr/share文件夹外的其他文件，这种权限是通过apache2.conf文件来控制的.

默认的apache2.conf为：

# this is the main apache server configuration file. it contains the
# configuration directives that give the server its instructions.
# see http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/readme.debian about debian specific
# hints.
#
#
# summary of how the apache 2 configuration works in debian:
# the apache 2 web server configuration in debian is quite different to
# upstream's suggested way to configure the web server. this is because debian's
# default apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# it is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). it puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. it is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# they are activated by symlinking available configuration files from their
# respective *-available/ counterparts. these should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. see
# their respective man pages for detailed information.
#
# * the binary is called apache2\. due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. calling /usr/bin/apache2 directly will not
# work with the default configuration.
# global configuration
#
#
# serverroot: the top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# note! if you intend to place this on an nfs (or otherwise network)
# mounted filesystem then please read the mutex documentation (available
# at <url:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# do not add a slash at the end of the directory path.
#
#serverroot "/etc/apache2"
#
# the accept serialization lock file must be stored on a local disk.
#
mutex file:${apache_lock_dir} default
#
# pidfile: the file in which the server should record its process
# identification number when it starts.
# this needs to be set in /etc/apache2/envvars
#
pidfile ${apache_pid_file}
#
# timeout: the number of seconds before receives and sends time out.
#
timeout 300
#
# keepalive: whether or not to allow persistent connections (more than
# one request per connection). set to "off" to deactivate.
#
keepalive on
#
# maxkeepaliverequests: the maximum number of requests to allow
# during a persistent connection. set to 0 to allow an unlimited amount.
# we recommend you leave this number high, for maximum performance.
#
maxkeepaliverequests 100
#
# keepalivetimeout: number of seconds to wait for the next request from the
# same client on the same connection.
#
keepalivetimeout 5
# these need to be set in /etc/apache2/envvars
user ${apache_run_user}
group ${apache_run_group}
#
# hostnamelookups: log the names of clients or just their ip addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# the default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in at least one lookup request to the
# nameserver.
#
hostnamelookups off
# errorlog: the location of the error log file.
# if you do not specify an errorlog directive within a <virtualhost>
# container, error messages relating to that virtual host will be
# logged here. if you *do* define an error logfile for a <virtualhost>
# container, that host's errors will be logged there and not here.
#
errorlog ${apache_log_dir}/error.log
#
# loglevel: control the severity of messages logged to the error_log.
# available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# it is also possible to configure the log level for particular modules, e.g.
# "loglevel info ssl:warn"
#
loglevel warn
# include module configuration:
includeoptional mods-enabled/*.load
includeoptional mods-enabled/*.conf
# include list of ports to listen on
include ports.conf
# sets the default security model of the apache2 httpd server. it does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# the former is used by web applications packaged in debian,
# the latter may be used for local directories served by the web server. if
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<directory />
 options followsymlinks
 allowoverride none
 require all denied
</directory>
<directory /usr/share>
 allowoverride none
 require all granted
</directory>
<directory /var/www/>
 options indexes followsymlinks
 allowoverride none
 require all granted
</directory>
#<directory /srv/>
# options indexes followsymlinks
# allowoverride none
# require all granted
#</directory>
# accessfilename: the name of the file to look for in each directory
# for additional configuration directives. see also the allowoverride
# directive.
#
accessfilename .htaccess
#
# the following lines prevent .htaccess and .htpasswd files from being
# viewed by web clients.
#
<filesmatch "^.ht">
 require all denied
</filesmatch>
#
# the following directives define some format nicknames for use with
# a customlog directive.
#
# these deviate from the common log format definitions in that they use %o
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# note that the use of %{x-forwarded-for}i instead of %h is not recommended.
# use mod_remoteip instead.
#
logformat "%v:%p %h %l %u %t "%r" %>s %o "%{referer}i" "%{user-agent}i"" vhost_combined
logformat "%h %l %u %t "%r" %>s %o "%{referer}i" "%{user-agent}i"" combined
logformat "%h %l %u %t "%r" %>s %o" common
logformat "%{referer}i -> %u" referer
logformat "%{user-agent}i" agent
# include of directories ignores editors' and dpkg's backup files,
# see readme.debian for details.
# include generic snippets of statements
includeoptional conf-enabled/*.conf
# include the virtual host configurations:
includeoptional sites-enabled/*.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

注意这当中的一段：

<directory />
 options followsymlinks
 allowoverride none
 require all denied
</directory>
<directory /usr/share>
 allowoverride none
 require all granted
</directory>
<directory /var/www/>
 options indexes followsymlinks
 allowoverride none
 require all granted
</directory>

由这段可以很容易的知道apache2到底为哪些文件夹赋予了打开的权限了。以后就可以通过修改这里达到各种不可告人的目的了。

最后还有一个重要的配置，就是默认目录的更改。默认的目录其实是记录在:/etc/apache2/sites-available/000-default.conf 文件当中（在/etc/apache2/sites-enable/中也有一个指向他的链接）：

myths@myths-x450ld:/etc/apache2/sites-available$ cat 000-default.conf 
<virtualhost *:80>
 # the servername directive sets the request scheme, hostname and port that
 # the server uses to identify itself. this is used when creating
 # redirection urls. in the context of virtual hosts, the servername
 # specifies what hostname must appear in the request's host: header to
 # match this virtual host. for the default virtual host (this file) this
 # value is not decisive as it is used as a last resort host regardless.
 # however, you must set it for any further virtual host explicitly.
 #servername www.example.com
 serveradmin webmaster@localhost
 documentroot /var/www/html
 # available loglevels: trace8, ..., trace1, debug, info, notice, warn,
 # error, crit, alert, emerg.
 # it is also possible to configure the loglevel for particular
 # modules, e.g.
 #loglevel info ssl:warn
 errorlog ${apache_log_dir}/error.log
 customlog ${apache_log_dir}/access.log combined
 # for most configuration files from conf-available/, which are
 # enabled or disabled at a global level, it is possible to
 # include a line for only one particular virtual host. for example the
 # following line enables the cgi configuration for this host only
 # after it has been globally disabled with "a2disconf".
 #include conf-available/serve-cgi-bin.conf
</virtualhost>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

当中的“documentroot ”键对应的值就是默认的目录了，可以任由我们修改了。

apache2的简单配置基本就是这些，不需要百度，我们也是完全可以自己弄清楚的。

注：

• 修改完配置文件后记得重启服务
• 可以顺手吧/var/www的权限设置为777方便修改网页

总结

以上就是这篇文章的全部内容了，希望本文的内容对大家的学习或者工作能带来一定的帮助，如果有疑问大家可以留言交流，谢谢大家对的支持。