欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  网络运营

Docker+keepalived+nginx实现主从热备的方法示例

程序员文章站 2022-06-19 08:32:32
前言 为解决单点故障,我们需要配置主从热备方案,服务器数量有限,故使用docker模拟安装配置。 本次配置默认已经安装了docker。 配置环境:centos7 64位 doc...

前言

为解决单点故障,我们需要配置主从热备方案,服务器数量有限,故使用docker模拟安装配置。

本次配置默认已经安装了docker。

配置环境:centos7 64位

docker版本:docker version 17.12.1-ce, build 7390fc6

1,拉取centos7镜像

docker pull centos:7

2,创建容器

docker run -it -d --name centos1 -d centos:7

3,进入容器centos1

docker exec -it centos1 bash

4,安装常用工具

yum updateyum install -y vimyum install -y wgetyum install -y gcc-c++ yum install -y pcre pcre-devel yum install -y zlib zlib-devel yum install -y openssl openssl--develyum install -y popt-develyum install -y initscripts
yum install -y net-tools

5,将容器打包成新的镜像,以后直接以该镜像创建容器

docker commit -a 'cfh' -m 'centos with common tools' centos1 centos_base

6,删除之前创建的centos1 容器,重新以基础镜像创建容器,安装keepalived+nginx

docker rm -f centos1
#容器内需要使用systemctl服务,需要加上/usr/sbin/init
docker run -it --name centos_temp -d --privileged centos_base /usr/sbin/init
docker exec -it centos_temp bash

作者:江湖救急
链接:https://juejin.im/post/5dc517386fb9a04a9272110b
来源:掘金
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。

7,安装nginx

#使用yum安装nginx需要包括nginx的库,安装nginx的库
rpm -uvh http://nginx.org/packages/centos/7/noarch/rpms/nginx-release-centos-7-0.el7.ngx.noarch.rpm
# 使用下面命令安装nginx
yum install -y nginx
#启动nginx
systemctl start nginx.service
#查看是否启动成功,出现nginx欢迎界面表示安装成功
curl 172.17.0.2

8,安装keepalived

1.下载keepalived wget http://www.keepalived.org/software/keepalived-1.2.18.tar.gz

2.解压安装:tar -zxvf keepalived-1.2.18.tar.gz -c /usr/local/

3.下载插件openssl yum install -y openssl openssl-devel(需要安装一个软件包)

4.开始编译keepalivedcd /usr/local/keepalived-1.2.18/ && ./configure --prefix=/usr/local/keepalived

5.make一下 make && make install

9,将keepalived 安装成系统服务

mkdir /etc/keepalivedcp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/然后复制keepalived脚本文件:cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ln -s /usr/local/sbin/keepalived /usr/sbin/可以设置开机启动:chkconfig keepalived on,到此我们安装完毕!

#若启动报错,则执行下面命令
cd /usr/sbin/ 
rm -f keepalived 
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/ 

#常用命令
systemctl daemon-reload 重新加载systemctl enable keepalived.service 设置开机自动启动systemctl disable keepalived.service 取消开机自动启动systemctl start keepalived.service 启动systemctl stop keepalived.service停止systemctl status keepalived.service 查看服务状态

10,修改/etc/keepalived/keepalived.conf文件

#备份配置文件
cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.backup

rm -f keepalived.conf
vim keepalived.conf
#配置文件如下

vrrp_script chk_nginx {
  script "/etc/keepalived/nginx_check.sh"
  interval 2
  weight -20
}

vrrp_instance vi_1 {
  state master
  interface eth0
  virtual_router_id 121
  mcast_src_ip 172.17.0.6
  priority 100
  nopreempt
  advert_int 1
  authentication {
    auth_type pass
    auth_pass 1111
  }

  track_script {
    chk_nginx
  }

  virtual_ipaddress {
    172.17.0.100
  }
}

11,添加心跳检测文件

vim nginx_check.sh
#以下是脚本内容
#!/bin/bash
a=`ps -c nginx –no-header |wc -l`
if [ $a -eq 0 ];then
  /usr/local/nginx/sbin/nginx
  sleep 2
  if [ `ps -c nginx --no-header |wc -l` -eq 0 ];then
    killall keepalived
  fi
fi

12,给脚本赋予执行权限

chmod +x nginx_check.sh

13,设置开机启动

systemctl enable keepalived.service

#开启keepalived
systemctl start keepalived.service

14,检测虚拟ip是否成功,在宿主机里面执行下面命令,如果出现nginx欢迎界面表示成功

curl 172.17.0.100

15,将centos_temp 容器重新打包成镜像,然后利用这个新镜像再创建两个容器,实现热备效果

docker commit -a 'cfh' -m 'centos with keepalived nginx' centos_temp centos_kn

16,删除所有容器

docker rm -f `docker ps -a -q`

17,用centos_kn 镜像创建主服务器容器

docker run --privileged -tid --name centos_master --restart=always centos_kn /usr/sbin/init

docker exec -it centos_master bash

18,修改centos_master里面nginx 欢迎页,

vim /usr/share/nginx/html/index.html

Docker+keepalived+nginx实现主从热备的方法示例

19,创建从服务器容器

docker run --privileged -tid --name centos_slave --restart=always centos_kn /usr/sbin/init
docker exec -it centos_slave bash

#修改keepalived.conf 配置文件,主要是state和priority两个参数的调整,其中master节点的priority值一定要比slave大才行

vrrp_script chk_nginx {
  script "/etc/keepalived/nginx_check.sh"
  interval 2
  weight -20
}

vrrp_instance vi_1 {
  state slave
  interface eth0
  virtual_router_id 121
  mcast_src_ip 172.17.0.6
  priority 80
  nopreempt
  advert_int 1
  authentication {
    auth_type pass
    auth_pass 1111
  }

  track_script {
    chk_nginx
  }

  virtual_ipaddress {
    172.17.0.100
  }
}

20,修改完成之后重新加载

systemctl daemon-reload
systemctl restart keepalived.service

21,修改nginx欢迎页(若nginx没启动则执行 systemctl start nginx.service)

vim /usr/share/nginx/html/index.html

Docker+keepalived+nginx实现主从热备的方法示例

22,测试

a> 分别在宿主机,centos_master,centos_slave中进行一下命令测试,如果显示都为master的欢迎页面,说明配置成功1/3

curl 172.17.0.100

b> 此时停止centos_master容器( docker stop centos_master ),保留centos_slave容器,执行以下命令,若切换到slave页面,则说明keepalived配置成功2/3

curl 172.17.0.100

c> 重启centos_master 容器,此时执行以下命令,看是从slave切换到了master,如果切换成功,说明我们配置到此成功了。

curl 172.17.0.100

说明,测试过程中,重启容器之后,nginx没有启动,需要进入容器启动一下,不然访问不到master页面了,但是可以ping通。

执行下面命令,配置nginx随机启动,这样不用每次重启容器还需要手动启动nginx

chkconfig nginx on

以上就是整个配置过程,希望对大家的学习有所帮助,也希望大家多多支持。