欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  网络运营

Linux系统下如何挂载FAT32的U盘

程序员文章站 2022-06-10 19:57:19
linux挂载u盘步骤如下 1:将u盘插入usb接口,检查是否插好 2:用fdisk命令检查分区和usb设备信息 [root@wgods ~]# fdisk -l...

linux挂载u盘步骤如下

1:将u盘插入usb接口,检查是否插好

2:用fdisk命令检查分区和usb设备信息

[root@wgods ~]# fdisk -l

disk /dev/sda: 1000.2 gb, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
units = cylinders of 16065 * 512 = 8225280 bytes

device boot start end blocks id system
/dev/sda1 * 1 13 104391 83 linux
/dev/sda2 14 121601 976655610 8e linux lvm

disk /dev/sdb: 4012 mb, 4012900352 bytes
223 heads, 55 sectors/track, 639 cylinders
units = cylinders of 12265 * 512 = 6279680 bytes

device boot start end blocks id system
/dev/sdb1 * 56 640 3580928 c w95 fat32 (lba)
partition 1 has different physical/logical beginnings (non-linux?):
phys=(42, 17, 40) logical=(55, 23, 1)
partition 1 has different physical/logical endings:
phys=(487, 222, 55) logical=(639, 6, 31)

通过上面信息我们可以看出usb设备是fat32格式的,标识为/dev/sdb1

[root@wgods ~]# fdisk -l | grep fat32
/dev/sdb1 * 56 640 3580928 c w95 fat32 (lba)

3:在mnt目录下先建立一个usb的目录

[root@wgods ~]# cd /mnt/
[root@wgods mnt]# mkdir usb

4:挂载u盘
[root@wgods mnt]# mount -t vfat /dev/sdb1 /mnt/usb

挂载成功后,我们可以在/mount/usb下看到相关的内容。

5:卸载u盘

执行umount命令卸载u盘时,报如下错误“device is busy”,可以用参数l解决问题。当然你也可以用fuser命令解决问题。如下所示


[root@wgods ~]# umount /mnt/usb
umount: /mnt/usb: device is busy
umount: /mnt/usb: device is busy

[root@wgods ~]# umount -f /mnt/usb
umount2: device or resource busy
umount: /mnt/usb: device is busy
umount2: device or resource busy
umount: /mnt/usb: device is busy


[root@wgods ~]# umount -l /mnt/usb

 

问题解决

---------------------------------------------------------------------------------

[root@wgods usb]# umount /mnt/usb
umount: /mnt/usb: device is busy
umount: /mnt/usb: device is busy
[root@wgods usb]# fuser -m /mnt/usb
/mnt/usb: 21123c 21158c 21180c 21182c 21223c
[root@wgods usb]# ps -auxw | grep 21123
warning: bad syntax, perhaps a bogus '-'? see /usr/share/doc/procps-3.2.7/faq
root 21123 0.0 0.0 3784 672 pts/2 t 15:10 0:00 more 12.sql
root 21346 0.0 0.0 3920 696 pts/2 s+ 15:52 0:00 grep 21123

[root@wgods usb]# fuser -kvm /mnt/usb

user pid access command
/mnt/usb: root 21123 f.c.. more
root 21158 ..c.. man
root 21180 ..c.. sh
root 21182 ..c.. less
root 21223 ..c.. bash

[etl@wgods ~]$ umount /mnt/usb
umount: /mnt/usb is not in the fstab (and you are not root)
[etl@wgods ~]$ su - root
password:
[root@wgods ~]# umount /mnt/usb

 


6: 删除usb目录
[root@wgods ~]# umount -l /mnt/usb
[root@wgods ~]# rm -rf /mnt/usb

注意:有时候挂载时,中文的文件名和目录名会出现乱码,为了避免这种情况可以指定字符集,命令如下

[root@wgods ~]# mount -t vfat -o iocharset=utf8,codepage=uft8 /dev/sdb1 /mnt/usb

[root@wgods ~]# mount -t vfat -o iocharset=cp936,codepage=936 /dev/sdb1 /mnt/usb

注意:cp936是指简体中文,cp950是指繁体中文。