牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--先决配置阶段
牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--先决配置阶段
基于VMwarevCenter Server中的Linux RedHat 6.4 安装Oracle 11GR2 11.2.0.4 RAC集群
1.网络规划
其中public和private要划分到不同的网段。保证安全传输
[root@Zracnode1~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4localhost4.localdomain4
::1 localhost localhost.localdomainlocalhost6 localhost6.localdomain6
10.2.13.80 zracnode1
10.2.13.81 zracnode2
10.2.13.82 zracnode1-vip
10.2.13.83 zracnode2-vip
10.2.12.140 zracnode1-priv
10.2.12.141 zracnode2-priv
10.2.13.142 zrac-scan
10.2.13.143 zrac-scan
10.2.13.144 zrac-scan
2.操作系统设置
*.安装的操作系统是LinuxRedhat 6.4
*.磁盘划分配置
磁盘目录 |
磁盘大小 |
|
/ |
30GB |
|
swap |
16GB |
|
/u01 |
100GB |
3.共享磁盘设置
共享磁盘配置有多种方式,nfs,磁盘阵列直接映射划分,我这里采用的是通过vmware vCenter server上的共享磁盘技术,操作步骤如下:
3.1. 需要对SCSI 控制器,进行配置。对总线配置为[物理]模式。参数解释如下:
选项 |
描述 |
无 |
其他虚拟机不能共享虚拟磁盘。 |
虚拟 |
同一台服务器上的虚拟机可以共享虚拟磁盘。 |
物理 |
任何服务器上的虚拟机均可共享虚拟磁盘。 |
3.2 新建SCSI controller 1控制器,并设置相关参数,VmwarevCenter操作页面如下:
3.3 新建硬盘,硬盘类型为[Thick provision eager zeroed].并且设置virtual Device Node为[SCSI(1:0)].在设置磁盘模式为[Independent-Persistent].操作页面如下:
3.4 添加已存在磁盘,在ZRAC02节点上面,添加磁盘。操作页面如下:
4. 安装RAC
4.1 先决条件
4.1.1 yum配置
挂载镜像配置yum
mount -oloop -t iso9660 /u01/software/rhel-server-6.4-x86_64-dvd.iso /u01/iso
[root@Zracnode1u01]# cat /etc/yum.repos.d/rhel-source.repo
[Server]
name=Server
baseurl=file:///u01/iso
gpgcheck=0
gpgkey=file:///u01/iso/RPM-GPG-KEY-redhat-release
4.1.2 vnc配置
VNC在Linux上的安装
#yuminstall tigervnc-server
#vncserver #该命令在服务器端启动一个VNC进程。允许一个
VNC View连接进来;如果需要多个View连接到服务器,需要多次执行上述命令;
Password: # 为了不想任何人都可以任意遥控此计算机。因此当第1次启动VNC server时,会要求设置网络遥控的密码。
Verify: # 验证密码;
进入root主目录下的.vnc隐含目录, 找到 xstartup文件并编辑:
# cd/root/.vnc
# vi xstartup
# twm& (注释掉该行)
startkde& (添加该行)
# killallXvnc
#vncserver
4.2 配置/etc/hosts文件(所有节点)
[root@rac01network-scripts]# vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4localhost4.localdomain4
::1 localhost localhost.localdomainlocalhost6 localhost6.localdomain6
10.2.13.80 Zracnode1
10.2.13.81 Zracnode2
10.2.13.82 Zracnode1-vip
10.2.13.83 Zracnode2-vip
10.2.13.140 Zracnode1-priv
10.2.13.141 Zracnode2-priv
10.2.13.142 Zrac-scan
4.3 添加组合用户(所有节点)
groupadd -g500 oinstall
groupadd -g501 dba
groupadd -g502 oper
groupadd -g503 asmadmin
groupadd -g504 asmoper
groupadd -g505 asmdba
useradd -goinstall -G dba,asmdba,oper oracle
useradd -goinstall -G asmadmin,asmdba,asmoper,oper,dba grid
检测用户oracle和grid
[root@rac1~]# id oracle
uid=500(oracle)gid=500(oinstall) groups=500(oinstall),501(dba),502(oper),505(asmdba)
[root@rac1~]# id grid
uid=501(grid)gid=500(oinstall) groups=500(oinstall),501(dba),502(oper),503(asmadmin),504(asmoper),505(asmdba)
对用户oracle和grid设置密码
[root@rac1~]# passwd oracle
[root@rac1~]# passwd grid
4.4.建立目录(所有节点)
mkdir/u01/app
chown -Rgrid:oinstall /u01/app/
chmod -R 775/u01/app/
mkdir -p/u01/app/oraInventory
chown -Rgrid:oinstall /u01/app/oraInventory/
chmod -R 775/u01/app/oraInventory/
mkdir -p/u01/app/grid
mkdir -p/u01/app/oracle
chown -Rgrid:oinstall /u01/app/grid/
chown -Roracle:oinstall /u01/app/oracle/
chmod -R 775/u01/app/grid/
chmod -R 775/u01/app/oracle/
4.5. 修改内核参数(所有节点)
[root@rac01~]# vi /etc/sysctl.conf
# for oracle11g
fs.aio-max-nr= 1048576
fs.file-max =6815744
kernel.shmall= 2147483648
kernel.shmmax= 68719476736
kernel.shmmni= 4096
kernel.sem =250 32000 100 128
net.ipv4.ip_local_port_range= 9000 65500
net.core.rmem_default= 262144
net.core.rmem_max= 4194304
net.core.wmem_default= 262144
net.core.wmem_max= 1048586
使修改参数立即生效:
[root@rac01~]# /sbin/sysctl -p
[root@rac01~]# /etc/security/limits.conf
grid soft nproc 2047
grid hard nproc 16384
grid soft nofile 1024
grid hard nofile 65536
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
[root@rac01~]# /etc/pam.d/login
session required pam_limits.so
[root@rac01 ~]#/etc/profile
if [ $USER ="oracle" ] || [ $USER = "grid" ]; then
if [ $SHELL = "/bin/ksh" ];then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
umask 022
fi
4.6 .禁用防火墙和SELINUX(所有节点)
serviceiptables stop
chkconfigiptables off
chkconfigiptables --list
setenforce 0
sed -i's/SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
4.7 .检查安装包
rpm -q --qf'%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n' binutils \
compat-libstdc++-33\
elfutils-libelf\
elfutils-libelf-devel\
gcc \
gcc-c++ \
glibc \
glibc-common\
glibc-devel \
glibc-headers\
ksh \
libaio \
libaio-devel\
libgcc \
libstdc++ \
libstdc++-devel\
make \
sysstat \
unixODBC \
4.8 .配置用户环境变量(grid和oracle用户_所有节点)
grid用户:
[grid@rac01 ~]# vi .bash_profile
export ORACLE_SID=+ASM1/+ASM2
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/grid/11.2
export PATH=$PATH:$ORACLE_HOME/bin
oracle用户:
[oracle@rac01 ~]# vi .bash_profile
export ORACLE_SID=racdb1/racdb2
export ORACLE_UNQNAME=$ORACLE_SID
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/11.2/db_1
export PATH=$PATH:$ORACLE_HOME/bin
4.9. ASM磁盘组规划&分区
4.9.1 使用fdisk划分磁盘,如下:
[root@rac01 ~]# fdisk /dev/sdb
划分效果如下:
---------------------------------------------------------------------------
Device Boot Start End Blocks Id System
/dev/sdb1 1 132 1060258+ 83 Linux //CRS1 900M
/dev/sdb2 133 264 1060290 83 Linux //CRS2 900M
/dev/sdb3 265 396 1060290 83 Linux //CRS3 900M
/dev/sdb4 397 13054 101675385 5 Extended
/dev/sdb5 397 3008 20980858+ 83 Linux //DATA1 30GB
/dev/sdb6 3009 5620 20980858+ 83 Linux //DATA2 30GB
/dev/sdb7 5621 8232 20980858+ 83 Linux //DATA3 30GB
/dev/sdb8 8233 9538 10490413+ 83 Linux //REC1 30GB
/dev/sdb9 9539 13054 28242238+ 83 Linux //REC2 30GB
4.9.2 安装asm
[root@rac02software]# rpm -ivh kmod-oracleasm-2.0.6.rh1-2.el6.x86_64.rpm
warning:kmod-oracleasm-2.0.6.rh1-2.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, keyID fd431d51: NOKEY
Preparing... ########################################### [100%]
1:kmod-oracleasm ########################################### [100%]
[root@rac02 software]# rpm -ivhoracleasm-support-2.1.8-1.el6.x86_64.rpm
warning: oracleasm-support-2.1.8-1.el6.x86_64.rpm:Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [100%]
[root@rac02 software]# rpm -ivhoracleasmlib-2.0.4-1.el6.x86_64.rpm
warning:oracleasmlib-2.0.4-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key IDec551f03: NOKEY
Preparing... ########################################### [100%]
1:oracleasmlib ###########################################[100%]
4.9.3 配置asm
RAC01执行下列操作:
[root@rac1 ~]# /etc/init.d/oracleasmconfigure
[root@rac1 ~]# /etc/init.d/oracleasmconfigure
Default user to own the driver interface[]: grid
Default group to own the driver interface[]: asmadmin
Start Oracle ASM library driver on boot(y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n)[y]: y
Writing Oracle ASM library driverconfiguration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLibdisks: [ OK ]
RAC02执行下列操作:
[root@rac02 software]# /etc/init.d/oracleasmconfigure
Default user to own the driver interface[]: grid
Default group to own the driver interface[]: asmadmin
Start Oracle ASM library driver on boot(y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n)[y]: y
Writing Oracle ASM library driverconfiguration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLibdisks: [ OK ]
以下操作在rac其中一个节点上进行,我在rac1上操作
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk CRS1 /dev/sdb1
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk CRS2 /dev/sdb2
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk CRS3 /dev/sdb3
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk DATA1 /dev/sdb5
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk DATA2 /dev/sdb6
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk DATA3 /dev/sdb7
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk REC1 /dev/sdb8
[root@rac1 ~]# /etc/init.d/oracleasmcreatedisk REC2 /dev/sdb9
以下操作在另一个节点上进行,RAC2上操作
[root@rac02 software]# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
[root@Zracnode2 software]# oracleasmlistdisks
CRS1
CRS2
CRS3
DATA1
DATA2
DATA3
REC1
REC2
4.10.grid和oracle用户配置SSH互信
为ssh和scp创建连接
ls -l /usr/local/bin/ssh
ls -l /usr/local/bin/scp
不存在则创建
[root@rac01 ~]# /bin/ln -s /usr/bin/ssh/usr/local/bin/ssh
[root@rac01 ~]# /bin/ln -s /usr/bin/scp/usr/local/bin/scp
为grid用户配置SSH:
在每个节点上:
[root@rac01 ~]# su – grid
[grid@rac01 ~]# mkdir ~/.ssh
[grid@rac01 ~]#cd .ssh
[grid@rac01 ~]# ssh-keygen -t rsa
[grid@rac01 ~]# ssh-keygen -t dsa
在节点1上:
[grid@rac01 ~]# touch authorized_keys
[grid@rac01 ~]# ssh rac01 cat/home/grid/.ssh/id_rsa.pub >> authorized_keys
[grid@rac01 ~]# ssh rac02 cat/home/grid/.ssh/id_rsa.pub >> authorized_keys
[grid@rac01 ~]# ssh rac01 cat /home/grid/.ssh/id_dsa.pub>> authorized_keys
[grid@rac01 ~]# ssh rac02 cat/home/grid/.ssh/id_dsa.pub >> authorized_keys
[grid@rac01 ~]# scp authorized_keysrac02:/home/grid/.ssh/
分别在每个节点上:
[grid@rac01 ~]# ssh rac01 date
[grid@rac01 ~]# ssh rac02 date
[grid@rac01 ~]# ssh-agent $SHELL
[grid@rac01 ~]# ssh-add
为oracle用户配置SSH:
在每个节点上:
[root@rac01 ~]# su – oracle
[oracle@rac01 ~]# mkdir ~/.ssh
[oracle@rac01 ~]#cd .ssh
[oracle@rac01 ~]# ssh-keygen -t rsa
[oracle@rac01 ~]# ssh-keygen -t dsa
在节点1上:
[oracle@rac01 ~]# touch authorized_keys
[oracle@rac01 ~]# ssh rac01 cat /home/oracle/.ssh/id_rsa.pub>> authorized_keys
[oracle@rac01 ~]# ssh rac02 cat /home/oracle/.ssh/id_rsa.pub>> authorized_keys
[oracle@rac01 ~]# ssh rac01 cat /home/oracle/.ssh/id_dsa.pub>> authorized_keys
[oracle@rac01 ~]# ssh rac02 cat /home/oracle/.ssh/id_dsa.pub>> authorized_keys
[oracle@rac01 ~]# scp authorized_keysrac02:/home/oracle/.ssh/
分别在每个节点上:
[oracle@rac01 ~]# ssh rac01 date
[oracle@rac01 ~]# ssh rac02 date
[oracle@rac01 ~]# ssh-agent $SHELL
[oracle@rac01 ~]# ssh-add
4.11.配置NTP
[root@rac01 ~]#vi /etc/ntp.conf
...
#server 0.centos.pool.ntp.org
#server 1.centos.pool.ntp.org
#server 2.centos.pool.ntp.org
server xxx.xxx.xxx.xxx
#server127.127.1.0 # local clock
#fudge 127.127.1.0 stratum 10
[root@rac01 ~]# vi /etc/sysconfig/ntpd
# Drop root to id 'ntp:ntp' by default.
OPTIONS="-x -u ntp:ntp -p /var/run/ntpd.pid"
# Set to 'yes' to sync hw clock aftersuccessful ntpdate
SYNC_HWCLOCK=yes
# Additional options for ntpdate
NTPDATE_OPTIONS=""
启动
[root@rac01 ~]# chkconfig ntpd on
[root@rac01 ~]# service ntpd start
[root@rac01 ~]# ntpdate -d -u xxx.xxx.xxx.xxx
启用name service cache daemon
[root@rac01 ~]# chkconfig --level 35 nscdon
[root@rac01 ~]# service nscd restart
-----------后面两个阶段,分别是GI安装和oracle安装,未完待续!~
上一篇: 怎么读CSS代码?_html/css_WEB-ITnose
下一篇: PHP中的类型约束介绍
推荐阅读
-
oracle12.2RAC之OGG安装配置(二)
-
oracle12.2RAC之OGG安装配置(一)
-
牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--先决配置阶段
-
牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--GI安装配置
-
牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--先决配置阶段_PHP教程
-
牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--GI安装配置_PHP教程
-
牛刀小试Oracle之ORACLE 11GR2 RAC安装配置--先决配置阶段
-
安装Oracle 11g RAC R2 之Linux DNS 配置
-
oracle12.2RAC之OGG安装配置(二)
-
安装Oracle 11g RAC R2 之Linux DNS 配置