欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  数据库

CoroSync + Drbd + MySQL 实现MySQL的高可用集群_MySQL

程序员文章站 2022-06-10 16:29:06
...
Mysql集群

Corosync + DRBD + MySQL构建高可用MySQL集群

节点规划:

node1.huhu.com172.16.100.103

node2.huhu.com172.16.100.104

资源名称规划

资源名称:可以是除了空白字符外的任意ACSII码字符

DRBD设备:在双节点上,此DRBD设备文件,一般为/dev/drbdN,主设备号147

磁盘:在双方节点上,各自提供存储设备

网络配置:双方数据同步所使用的网络属性

DRBD从Linux内核2.6.33起已经整合进内核

1.配置双击互信(基于秘钥认证),HOSTS文件,时间同步

1)所有节点的主机名称和对应的IP地址解析服务可以正常工作,且每个节点的主机名称需要跟"uname -n“命令的结果保持一致;因此,需要保证两个节点上的/etc/hosts文件均为下面的内容:

172.16.100.103node1.huhu.com node1

172.16.100.104node2.huhu.com node2

Node1:

#sed -i 's@/(HOSTNAME=/).*@/1node1.huhu.com@g' /etc/sysconfig/network

#hostname node1.huhu.com

Node2:

#sed -i 's@/(HOSTNAME=/).*@/1node2.huhu.com@g' /etc/sysconfig/network

#hostname node2.huhu.com

2)设定两个节点可以基于密钥进行ssh通信,这可以通过类似如下的命令实现:

#yum install openssh-clients

Node1:

#ssh-keygen -t rsa

#ssh-copy-id -i ~/.ssh/id_rsa.pub root@node2

Node2:

#ssh-keygen -t rsa

#ssh-copy-id -i ~/.ssh/id_rsa.pub root@node1

配置时间同步:

*/5* * * * root /usr/sbin/ntpdate ntp.api.bz & > /dev/null

2.创建和配置DRBD

Node1上执行:

#rpm -Uvh http://www.elrepo.org/elrepo-release-6-6.el6.elrepo.noarch.rpm

#ssh node2 'rpm -Uvh http://www.elrepo.org/elrepo-release-6-6.el6.elrepo.noarch.rpm'

#yum update -y

#ssh node2 'yum update -y'

#yum install drbd84-utils kmod-drbd84 -y

#ssh node2 'yum install drbd84-utils kmod-drbd84 -y'

加载模块到内核:

#/sbin/modprobe drbd

#ssh node2 '/sbin/modprobe drbd'

DRBD的配置文件:

/etc/drbd.conf

/etc/drbd.d/global_common.conf

/etc/drbd.d/resource.d/

#yum -y install parted

#ssh node2 'yum -y install parted'

#fdisk /dev/sdb

n新建分区

p主分区

1分区号,两车回车按照默认大小选择

wq保存退出

#partprobe /dev/sdb1

资源规划:

资源名称:mydrbd

DRBD设备:/dev/drbd0

磁盘:/dev/sdb1

网络配置:100M

#cat /etc/drbd.d/global_common.conf | grep -v "#"

global{

usage-countyes;

}

common{

handlers{

pri-on-incon-degr"/usr/lib/drbd/notify-pri-on-incon-degr.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ;reboot -f";

pri-lost-after-sb"/usr/lib/drbd/notify-pri-lost-after-sb.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ;reboot -f";

local-io-error"/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh;echo o > /proc/sysrq-trigger ; halt -f";

}

startup{

}

options{

}

disk{

on-io-errordetach;

}

net{

cram-hmac-alg "sha1";

shared-secret "1q2w3e4r5t6y";

}

syncer{

rate 200M;

}

}

#cat mydrbd.res

resourcemydrbd {

device/dev/drbd0;

disk/dev/sdb1;

meta-diskinternal;

onnode1.huhu.com {

address172.16.100.103:7789;

}

onnode1.huhu.com {

address172.16.100.104:7789;

}

}

复制配置文件到node2节点

scp-r /etc/drbd.* node2:/etc/

在两个节点上,初始化已定义的资源,并启动服务

#drbdadm create-md mydrbd

#ssh node2 'drbdadm create-md mydrbd'

#/etc/init.d/drbd start

#ssh node2 '/etc/init.d/drbd start'

查看DRBD设备的状态:

#cat /proc/drbd

version:8.4.4 (api:1/proto:86-101)

GIT-hash:599f286440bd633d15d5ff985204aff4bccffadd build by phil@Build64R6, 2013-10-1415:33:06

0:cs:Connected ro:Secondary/Secondaryds:Inconsistent/Inconsistent C r-----

ns:0nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:2096348

目前两个节点都处于secondary状态,手动让其node1成为主节点:

#drbdadm -- --overwrite-data-of-peer primary mydrbd

#cat /proc/drbd

version:8.4.4 (api:1/proto:86-101)

GIT-hash:599f286440bd633d15d5ff985204aff4bccffadd build by phil@Build64R6, 2013-10-1415:33:06

0:cs:Connected ro:Primary/Secondaryds:UpToDate/UpToDateC r-----

ns:2096348nr:0 dw:0 dr:2097012 al:0 bm:128 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

在primary节点上进行格式化drbd分区然后挂载

#mke2fs -j /dev/drbd0

#mkdir /mydata

#mount /dev/drbd0 /mydata/

#cp /etc/inittab /mydata/

#ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------.2 root root 16K Jul 8 17:23 lost+found

到此drbd分区已经可以正常使用了

DRBD分区的主备切换

primary节点上执行:

#umount /mydata/

# drbdadm secondary mydrbd

#drbd-overview

0:mydrbd/0ConnectedSecondary/SecondaryUpToDate/UpToDateC r-----

secondary上执行

#drbd-overview确保两者的状态都有secondary状态

#drbdadm primary mydrbd

#mkdir -p /mydata

# mount /dev/drbd0 /mydata/

#ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------.2 root root 16K Jul 8 17:23 lost+found

#drbd-overview

0:mydrbd/0ConnectedPrimary/SecondaryUpToDate/UpToDate Cr----- /mydata ext3 2.0G 36M 1.9G 2%

状态已经改变,primary /secondary

3.配置coresync服务

各个节点上停止掉drbd服务,并且关闭开机启动

#/etc/init.d/drbd stop

#ssh node2 '/etc/init.d/drbd stop'

#chkconfig drbd off

#ssh node2 'chkconfig drbd off'

#chkconfig --list | grep drbd

#ssh node2 'chkconfig --list | grep drbd'

drbd0:off 1:off 2:off 3:off 4:off 5:off 6:off

安装corosync

#yum install libibverbs librdmacm lm_sensors libtool-ltdl openhpi-libs openhpiperl-TimeDate

#yum install corosync pacemaker

#ssh node2 '# yum install libibverbs librdmacm lm_sensors libtool-ltdlopenhpi-libs openhpi perl-TimeDate'

wgethttp://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/crmsh-2.1-1.1.x86_64.rpm&& wgethttp://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/pssh-2.3.1-4.1.x86_64.rpm

#ssh node2 'wget http://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/crmsh-2.1-1.1.x86_64.rpm&& wgethttp://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/pssh-2.3.1-4.1.x86_64.rpm'

yum--nogpgcheck localinstall crmsh-2.1-1.1.x86_64.rpm pssh-2.3.1-4.1.x86_64.rpm

如果安装失败,请添加以下源

#vim /etc/yum.repos.d/ha-clustering.repo

[haclustering]

name=HAClustering

baseurl=http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/

enabled=1

gpgcheck=0

#yum --nogpgcheck localinstall crmsh-2.1-1.1.x86_64.rpmpssh-2.3.1-4.1.x86_64.rpm

node2上同样执行以上

配置corosync

#cd /etc/corosync/

#cp corosync.conf.example corosync.conf

#cat corosync.conf | grep -v "^#" | sed -e'/^$/d'

compatibility: whitetank

totem {

version: 2

secauth: on

threads: 2

interface {

ringnumber: 0

bindnetaddr: 172.16.100.0

mcastaddr: 226.94.8.9

mcastport: 5405

ttl: 1

}

}

logging {

fileline: off

to_stderr: no

to_logfile: yes

to_syslog: no

logfile: /var/log/cluster/corosync.log

debug: off

timestamp: on

logger_subsys {

subsys: AMF

debug: off

}

}

service {

ver: 0

name: pacemaker

# use_mgmtd: yes

}

aisexec {

user: root

group: root

}

amf {

mode: disabled

}

生成秘钥

#corosync-keygen

#scp -p authkey corosync.conf node2:/etc/corosync/

创建日志文件目录

#mkdir -p /var/log/cluster/ -pv

# ssh node2 'mkdir -p /var/log/cluster/ -pv'

启动corosync服务

#service corosync start

#ssh node2 'service corosync start'

检查corosync引擎是否已经启动

#grep -e "Corosync Cluster Engine" -e "configuration file"/var/log/cluster/corosync.log

Jul09 10:28:14 corosync [MAIN ] Corosync Cluster Engine ('1.4.1'): started andready to provide service.

Jul09 10:28:14 corosync [MAIN ]Successfullyreadmain configuration file '/etc/corosync/corosync.conf'.

查看节点成员之间通信是否正常

#grep TOTEM /var/log/cluster/corosync.log

Jul09 10:28:14 corosync [TOTEM ] Initializing transport (UDP/IP Multicast).

Jul09 10:28:14 corosync [TOTEM ] Initializing transmit/receive security:libtomcrypt SOBER128/SHA1HMAC (mode 0).

Jul09 10:28:14 corosync [TOTEM ]The network interface[172.16.100.103] is now up.

Jul09 10:28:14 corosync [TOTEM ] A processor joined or left the membership and anew membership was formed.

Jul09 10:28:29 corosync [TOTEM ] A processor joined or left the membership and anew membership was formed.

检查pacemaker启动是否正常

#grep pcmk_startup /var/log/cluster/corosync.log

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup: CRM: Initialized

Jul09 10:28:14 corosync [pcmk ] Logging: Initialized pcmk_startup

Jul09 10:28:14 corosync [pcmk ]info: pcmk_startup:Maximum core file size is:18446744073709551615

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup: Service: 9

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup: Local hostname: node1.huhu.com

查看错误信息

#grep ERROR /var/log/cluster/corosync.log | grep -v unpack_resources

Jul09 10:28:14 corosync [pcmk ] ERROR: process_ais_conf: You have configured acluster using the Pacemaker plugin for Corosync. The plugin is not supported inthis environment and will be removed very soon.

Jul09 10:28:14 corosync [pcmk ] ERROR: process_ais_conf: Please see Chapter 8 of'Clusters from Scratch' (http://www.clusterlabs.org/doc) for details on usingPacemaker with CMAN

Jul09 10:28:35 [1373] node1.huhu.com pengine: notice: process_pe_message:Configuration ERRORs found during PE processing. Please run "crm_verify-L" to identify issues.

注意:这里因为没有使用stonith设备,因此错误可以忽略

#crm status

Lastupdated: Wed Jul 9 10:49:53 2014

Lastchange: Wed Jul 9 10:19:07 2014 via crmd on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node1.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

0Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

以上说明corosync配置启动正常。

关闭stonith设备,并验证提交

crm(live)#configure

crm(live)configure#property stonith-enabled=false

crm(live)configure#verify

crm(live)configure#commit

关闭不具备法定票数的时候,不能关闭集群服务

crm(live)configure#property no-quorum-policy=ignore

crm(live)configure#verify

crm(live)configure#commit

配置资源粘性,更倾向于当前节点

crm(live)configure#rsc_defaults resource-stickiness=100

crm(live)configure#verify

crm(live)configure#commit

查看当前的配置

crm(live)configure#show

nodenode1.huhu.com

nodenode2.huhu.com

propertycib-bootstrap-options: /

dc-version=1.1.10-14.el6_5.3-368c726/

cluster-infrastructure="classicopenais (with plugin)" /

expected-quorum-votes=2/

stonith-enabled=false/

no-quorum-policy=ignore

rsc_defaultsrsc-options: /

resource-stickiness=100

crm(live)configure#

查看drbd的资源代理

crm(live)configure#cd ..

crm(live)#ra

crm(live)ra#providers drbd

linbit

注意:这里只有linbit没有beartbeat,corosync1.4以前的版本有heartbeat。

查看原数据

crm(live)ra#meta ocf:linbit:drbd

定义资源:

crm(live)configure#primitive mysql_drbd ocf:linbit:drbd paramsdrbd_resource=mydrbd op start timeout=240 op stop timeout=100 op monitorrole=Master interval=50s timeout=30s op monitor role=Slave interval=60s timeout=30s

定义群集资源:

crm(live)configure#master MS_mysql_drbd mysql_drbd metamaster-max="1" master-node-max="1" clone-max="2"clone-node-max="1" notify="true"

crm(live)configure#show mysql_drbd

primitivemysql_drbd ocf:linbit:drbd /

paramsdrbd_resource=mydrbd /

opstart timeout=240 interval=0 /

opstop timeout=100 interval=0 /

opmonitor role=Master interval=50s timeout=30s /

opmonitor role=Slave interval=60s timeout=30s

crm(live)configure#show MS_mysql_drbd

msMS_mysql_drbd mysql_drbd /

metamaster-max=1 master-node-max=1 clone-max=2 clone-node-max=1 notify=true

crm(live)configure#verify

crm(live)configure#commit

crm(live)configure#cd

crm(live)#status

Lastupdated: Wed Jul 9 11:54:30 2014

Lastchange: Wed Jul 9 11:54:17 2014 via cibadmin on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

2Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/Slave Set: MS_mysql_drbd [mysql_drbd]

Masters: [ node1.huhu.com ]

Slaves: [ node2.huhu.com ]

crm(live)#

主从资源已经定义完成

[root@node1corosync]# drbd-overview

0:mydrbd/0Connected Primary/Secondary UpToDate/UpToDate C r-----

[root@node1corosync]#

此时当前节点已经成为主资源了

手动做一次主从切换:

#crm node standby

#crm status

Lastupdated: Wed Jul 9 12:01:44 2014

Lastchange: Wed Jul 9 12:01:29 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

2Resources configured

Nodenode1.huhu.com: standby

Online:[ node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node2.huhu.com ]

Stopped:[ node1.huhu.com ]

#crm node online

#crm status

Lastupdated: Wed Jul 9 12:02:46 2014

Lastchange: Wed Jul 9 12:02:43 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

2Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

#drbd-overview

0:mydrbd/0Connected Secondary/Primary UpToDate/UpToDate C r-----

[root@node1corosync]#

当前节点就切换为从节点了

此时保证了资源可以主从切换,但是文件系统是没有挂载

因此必须定义文件系统

crm(live)configure#primitive mystore ocf:heartbeat:Filesystem paramsdevice=/dev/drbd0 directory=/mydata fstype=ext3 op start timeout=60 op stoptimeout=60

crm(live)configure#verify

注意:这里千万不要提交,因为必须保证文件系统跟主节点在一起,定义排列约束

crm(live)configure#colocation mystore_with_MS_mysql_drbd inf: mystoreMS_mysql_drbd:Master

定义存储资源必须和资源的主节点在一起

crm(live)configure#order mystore_after_MS_mysql_drbd mandatory:MS_mysql_drbd:promote mystore:start

定义存储资源必须在主节点启动后进行挂载

crm(live)configure#verify

crm(live)configure#commit

crm(live)configure#cd ..

crm(live)#status

Lastupdated: Wed Jul 9 12:25:25 2014

Lastchange: Wed Jul 9 12:22:30 2014 via cibadmin on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node1.huhu.com ]

Slaves:[ node2.huhu.com ]

mystore(ocf::heartbeat:Filesystem): Started node1.huhu.com

crm(live)#

可以看到Master在node1上,mystore就启动在node1上

[root@node1~]# ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------2 root root 16K Jul 8 17:23 lost+found

[root@node1~]#

手动模拟一次切换

[root@node1corosync]# crm node standby

[root@node1corosync]# crm status

Lastupdated: Wed Jul 9 12:28:55 2014

Lastchange: Wed Jul 9 12:28:49 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configured

Nodenode1.huhu.com: standby

Online:[ node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node2.huhu.com ]

Stopped:[ node1.huhu.com ]

mystore(ocf::heartbeat:Filesystem): Started node2.huhu.com

[root@node1corosync]#

[root@node2~]# ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------2 root root 16K Jul 8 17:23 lost+found

Youhave new mail in /var/spool/mail/root

[root@node2~]#

这样就切换到node2节点上。

4.配置MySQL结合DRBD和corosync

分别在node1节点上创建MySQL用户和组

#groupadd -g 3306 mysql

#useradd -u 3306 -g mysql -s /sbin/nologin -M mysql

#id mysql

uid=3306(mysql)gid=3306(mysql) groups=3306(mysql)

#ssh node2 'groupadd -g 3306 mysql'

#ssh node2 'useradd -u 3306 -g mysql -s /sbin/nologin -M mysql'

#wgethttp://cdn.mysql.com/Downloads/MySQL-5.5/mysql-5.5.38-linux2.6-x86_64.tar.gz

#tar zxvf mysql-5.5.38-linux2.6-x86_64.tar.gz -C /usr/local/

#cd /usr/local/

#ln -s mysql-5.5.38-linux2.6-x86_64/ mysql

#cd mysql

#chown root:mysql -R .

#cp support-files/my-huge.cnf /etc/my.cnf

#cp support-files/mysql.server /etc/init.d/mysqld

#[ -x /etc/init.d/mysqld ] && echo "ok" || echo "NO"

确保当前在主节点上操作

#drbd-overview

0:mydrbd/0ConnectedPrimary/SecondaryUpToDate/UpToDate Cr----- /mydata ext3 2.0G 36M 1.9G 2%

#mkdir -p /mydata/data

#chown -R mysql:mysql /mydata/data/

#scripts/mysql_install_db --user=mysql--datadir=/mydata/data

vim/etc/my.cnf

datadir=/mydata/data

#chkconfig --add mysqld

#chkconfig mysqld off

#service mysqld start

确保启动OK

#/usr/local/mysql/bin/mysql -uroot -e "CREATE DATABASE mydb"

[root@node1mysql]# /usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mydb|

|mysql |

|performance_schema |

|test |

+--------------------

#service mysqld stop

#chkconfig --list | grep 3:off | grep mysql

mysqld0:off 1:off 2:off 3:off 4:off 5:off 6:off

[root@node1mysql]#

将存储资源切换到node2上,在node2MySQL配置好

#crm node standby

[root@node1mysql]# crm status

Lastupdated: Wed Jul 9 14:45:36 2014

Lastchange: Wed Jul 9 14:45:29 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configure

Nodenode1.huhu.com: standby

Online:[ node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Stopped:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

[root@node1mysql]# crm node online

[root@node1mysql]# crm status

Lastupdated: Wed Jul 9 14:45:52 2014

Lastchange: Wed Jul 9 14:45:49 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configure

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

[root@node1mysql]#

# scp /root/mysql-5.5.38-linux2.6-x86_64.tar.gz node2:/root/

# scp /etc/my.cnf node2:/etc/my.cnf

# scp /etc/init.d/mysqld node2:/etc/init.d/mysqld

在node2上安装MySQL

#tar zxvf mysql-5.5.38-linux2.6-x86_64.tar.gz -C /usr/local/

#cd /usr/local/

#ln -s mysql-5.5.38-linux2.6-x86_64/ mysql

#cd mysql

#chown root:mysql -R .

注意:千万不要手动创建/mydata/data,否则会导致文件损坏

缺少相关库文件# yum install libaio

#service mysqld start

#/usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mydb|

|mysql |

|performance_schema |

|test |

+--------------------+

[root@node2mydata]#

#service mysqld stop

#chkconfig mysqld off

配置MySQL成为集群资源

crm(live)#configure

crm(live)configure#primitive mysqld lsb:mysqld

crm(live)configure#verify

crm(live)configure#colocation mysqld_with_mystore inf: mysqld mystore

crm(live)configure#show xml

MySQL服务一定是跟MySQL存储资源在一起

crm(live)configure#order mysqld_after_mystore mandatory: mystore mysqld

crm(live)configure#verify

MySQL服务一定是在MySQ存储转移之后的,因此定义顺序约束

crm(live)#status

Lastupdated: Wed Jul 9 16:18:27 2014

Lastchange: Wed Jul 9 16:18:16 2014 via cibadmin on node2.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

4Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

mysqld (lsb:mysqld): Started node2.huhu.com

crm(live)#

因此登录node2节点

#/usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

| mydb|

|mysql |

|performance_schema |

|test |

+--------------------+

#/usr/local/mysql/bin/mysql -uroot -e "DROP DATABASE mydb"

#/usr/local/mysql/bin/mysql -uroot -e "CREATE DATABASE testdb"

这里再次进行主从节切换

#crm node standby

#crm status

Masters:[ node1.huhu.com ]

Stopped:[ node2.huhu.com ]

mystore(ocf::heartbeat:Filesystem): Started node1.huhu.com

mysqld(lsb:mysqld): Started node1.huhu.com

#crm node online

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node1.huhu.com ]

Slaves:[ node2.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node1.huhu.com

mysqld (lsb:mysqld): Started node1.huhu.com

在node1节点上

#/usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mysql |

|performance_schema |

|test |

|testdb|

+--------------------

testdb正常显示

最后给MySQL定义一个虚拟IP资源

crm(live)configure#primitive myip ocf:heartbeat:IPaddr paramsip=172.16.100.119 nic=eth0 cidr_netmask=24

crm(live)configure#verify

crm(live)configure#colocation myip_with_MS_mysql_drbd inf:MS_mysql_drbd:Master myip

crm(live)configure#verify

crm(live)configure#show xml

crm(live)configure#commit

crm(live)configure#cd ..

crm(live)#status

Lastupdated: Wed Jul 9 16:46:27 2014

Lastchange: Wed Jul 9 16:46:20 2014 via cibadmin on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

5Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node1.huhu.com ]

Slaves:[ node2.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node1.huhu.com

mysqld (lsb:mysqld): Started node1.huhu.com

myip (ocf::heartbeat:IPaddr): Started node1.huhu.com

crm(live)

可以看到myip已经在node1启动。

#ip addr

1:lo: mtu 16436 qdisc noqueue state UNKNOWN

link/loopback00:00:00:00:00:00 brd 00:00:00:00:00:00

inet127.0.0.1/8 scope host lo

inet6::1/128 scope host

valid_lftforever preferred_lft forever

2:eth0: mtu 1500 qdisc pfifo_fast stateUP qlen 1000

link/ether00:0c:29:a9:86:42 brd ff:ff:ff:ff:ff:ff

inet172.16.100.103/24 brd 172.16.100.255 scope global eth0

inet172.16.100.119/24brd 172.16.100.255 scopeglobal secondary eth0

inet6fe80::20c:29ff:fea9:8642/64 scope link

valid_lftforever preferred_lft forever

5.在其节点上进行MySQL登录验证

登录MySQL创建用户

#/usr/local/mysql/bin/mysql -uroot -e "GRANT ALL ON *.* TO root@'%'IDENTIFIED BY '123.com';FLUSH PRIVILEGES"

#mysql -uroot -p123.com -h172.16.100.119 -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mysql |

|performance_schema |

|test |

| testdb |

+--------------------+

[root@localhost~]#

在模拟主从节点切换:

#crm node standby

#crm node online

#crm status

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

mysqld (lsb:mysqld): Started node2.huhu.com

myip (ocf::heartbeat:IPaddr): Started node2.huhu.com

#mysql -uroot -p123.com -h172.16.100.119 -e "SHOW DATABASES"

[root@node2~]# crm

crm(live)#configure

crm(live)configure#show

nodenode1.huhu.com /

attributesstandby=off

nodenode2.huhu.com /

attributesstandby=off

primitivemyipIPaddr /

paramsip=172.16.100.119nic=eth0cidr_netmask=24

primitivemysql_drbdocf:linbit:drbd /

paramsdrbd_resource=mydrbd/

opstarttimeout=240interval=0/

opstoptimeout=100interval=0/

opmonitorrole=Masterinterval=50stimeout=30s/

opmonitorrole=Slaveinterval=60stimeout=30s

primitivemysqldlsb:mysqld

primitivemystoreFilesystem /

paramsdevice="/dev/drbd0"directory="/mydata"fstype=ext3/

opstarttimeout=60interval=0/

opstoptimeout=60interval=0

msMS_mysql_drbd mysql_drbd /

metamaster-max=1master-node-max=1clone-max=2clone-node-max=1notify=true

colocationmyip_with_MS_mysql_drbdinf:MS_mysql_drbd:Mastermyip

colocationmysqld_with_mystoreinf:mysqldmystore

colocationmystore_with_MS_mysql_drbdinf:mystoreMS_mysql_drbd:Master

ordermysqld_after_mystoreMandatory:mystore mysqld

ordermystore_after_MS_mysql_drbdMandatory:MS_mysql_drbd:promote mystore:start

propertycib-bootstrap-options:/

dc-version=1.1.10-14.el6_5.3-368c726/

cluster-infrastructure="classic openais (with plugin)" /

expected-quorum-votes=2/

stonith-enabled=false/

no-quorum-policy=ignore

rsc_defaultsrsc-options: /

resource-stickiness=100

crm(live)configure#