mysql数据库，apacha服务器，php服务器的搭建_MySQL

博客

一、安装mysql:

准备压缩包：mysql-5.5.33-linux2.6-x86_64.tar.gz

[root@www ~]# groupadd -r mysql

[root@www ~]# useradd -g mysql -r -s /sbin/nologin mysql

[root@www ~]# id mysql

uid=496(mysql) gid=493(mysql) groups=493(mysql)

[root@www ~]# ls

anaconda-ks.cfg install.log install.log.syslog mysql-5.5.33-linux2.6-x86_64.tar.gz

[root@www ~]# tar xf mysql-5.5.33-linux2.6-x86_64.tar.gz -C /usr/local

[root@www ~]# cd /usr/local

[root@www local]# ls

bin etc games include lib lib64 libexec mysql-5.5.33-linux2.6-x86_64 sbin share src

[root@www local]# ln -sv mysql-5.5.33-linux2.6-x86_64/ mysql

`mysql' -> `mysql-5.5.33-linux2.6-x86_64/'

[root@www local]# mkdir /data

[root@www local]# fdisk /dev/sda

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help): n

Command action

e extended

p primary partition (1-4)

p

Partition number (1-4): 3

First cylinder (7859-15665, default 7859):

Using default value 7859

Last cylinder, +cylinders or +size{K,M,G} (7859-15665, default 15665): +20G

Command (m for help): t

Partition number (1-4): 3

Hex code (type L to list codes): 8e

Changed system type of partition 3 to 8e (Linux LVM)

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.

The kernel still uses the old table. The new table will be used at

the next reboot or after you run partprobe(8) or kpartx(8)

Syncing disks.

[root@www local]# cat /proc/partitions

major minor #blocks name

8 0 125829120 sda

8 1 204800 sda1

8 2 62914560 sda2

8 3 20979891 sda3

253 0 20971520 dm-0

253 1 2097152 dm-1

253 2 10485760 dm-2

253 3 20971520 dm-3

[root@www local]# pvcreate /dev/sda3

Physical volume "/dev/sda3" successfully created

[root@www local]# vgcreate myvg /dev/sda3

Volume group "myvg" successfully created

[root@www local]# lvcreate -L 10G -n mydata myvg

Logical volume "mydata" created

[root@www local]# lvs

LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert

mydata myvg -wi-a---- 10.00g

root vg0 -wi-ao--- 20.00g

swap vg0 -wi-ao--- 2.00g

usr vg0 -wi-ao--- 10.00g

var vg0 -wi-ao--- 20.00g

[root@www local]# mke2fs -t ext4 /dev/myvg/mydata

[root@www local]# vim /etc/fstab

# Created by anaconda on Sat Mar 22 10:51:06 2014

#

# Accessible filesystems, by reference, are maintained under '/dev/disk'

# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info

#

/dev/mapper/vg0-root / ext4 defaults 1 1

UUID=21013d46-de12-479a-beed-1a04aa11033d /boot ext4 defaults 1 2

/dev/mapper/vg0-usr /usr ext4 defaults 1 2

/dev/mapper/vg0-var /var ext4 defaults 1 2

/dev/mapper/vg0-swap swap swap defaults 0 0

tmpfs /dev/shm tmpfs defaults 0 0

devpts /dev/pts devpts gid=5,mode=620 0 0

sysfs /sys sysfs defaults 0 0

proc /proc proc defaults 0 0

/dev/myvg/mydata /data ext4 defaults 0 0

~

[root@www local]# mount -a

[root@www local]# mount

/dev/mapper/vg0-root on / type ext4 (rw)

proc on /proc type proc (rw)

sysfs on /sys type sysfs (rw)

devpts on /dev/pts type devpts (rw,gid=5,mode=620)

tmpfs on /dev/shm type tmpfs (rw)

/dev/sda1 on /boot type ext4 (rw)

/dev/mapper/vg0-usr on /usr type ext4 (rw)

/dev/mapper/vg0-var on /var type ext4 (rw)

none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)

/dev/mapper/myvg-mydata on /data type ext4 (rw)

[root@www local]# cd /data

[root@www data]# mkdir mydata

[root@www data]# chown -R mysql.mysql mydata/

[root@www data]# ll

total 20

drwx------ 2 root root 16384 Mar 22 12:01 lost+found

drwxr-xr-x 2 mysql mysql 4096 Mar 22 12:06 mydata

[root@www data]# cd /usr/local/mysql

[root@www mysql]# chown -R root.mysql ./*

[root@www mysql]# ll

total 200

drwxr-xr-x 2 root mysql 4096 Mar 22 11:54 bin

-rw-r--r-- 1 root mysql 17987 Jul 15 2013 COPYING

drwxr-xr-x 3 root mysql 4096 Mar 22 11:54 data

drwxr-xr-x 2 root mysql 4096 Mar 22 11:54 docs

drwxr-xr-x 3 root mysql 4096 Mar 22 11:54 include

-rw-r--r-- 1 root mysql 134493 Jul 15 2013 INSTALL-BINARY

drwxr-xr-x 3 root mysql 4096 Mar 22 11:54 lib

drwxr-xr-x 4 root mysql 4096 Mar 22 11:54 man

drwxr-xr-x 10 root mysql 4096 Mar 22 11:54 mysql-test

-rw-r--r-- 1 root mysql 2496 Jul 15 2013 README

drwxr-xr-x 2 root mysql 4096 Mar 22 11:54 scripts

drwxr-xr-x 27 root mysql 4096 Mar 22 11:54 share

drwxr-xr-x 4 root mysql 4096 Mar 22 11:54 sql-bench

drwxr-xr-x 3 root mysql 4096 Mar 22 11:54 support-files

[root@www mysql]# scripts/mysql_install_db --datadir=/data/mydata --user=mysql

Installing MySQL system tables...

OK

Filling help tables...

OK

[root@www mysql]# ls /data/mydata

mysql performance_schema test

[root@www mysql]# cp support-files/mysql.server /etc/rc.d/init.d/mysqld

[root@www mysql]# chkconfig --add mysqld

[root@www mysql]# chkconfig --list mysqld

mysqld 0:off1:off2:on3:on4:on5:on6:off

[root@www mysql]# cp support-files/my-large.cnf /etc/my.cnf

cp: overwrite `/etc/my.cnf'? y

[root@www mysql]# vim /etc/my.cnf

# The MySQL server

[mysqld]

port = 3306

socket = /tmp/mysql.sock

skip-external-locking

key_buffer_size = 256M

max_allowed_packet = 1M

table_open_cache = 256

sort_buffer_size = 1M

read_buffer_size = 1M

read_rnd_buffer_size = 4M

myisam_sort_buffer_size = 64M

thread_cache_size = 8

query_cache_size= 16M

# Try number of CPU's*2 for thread_concurrency

thread_concurrency 4

datadir = /data/mydata

[root@www mysql]# service mysqld start

Starting MySQL... [ OK ]

[root@www mysql]# vim /etc/profile.d/mysql.sh

export PATH=/usr/local/mysql/bin:$PATH

~

[root@www mysql]# cd

[root@www ~]# . /etc/profile.d/mysql.sh

现在mysql就可能运行起来了，我们进入mysql看一下吧，看看还有什么要设置的

[root@www ~]# mysql

Welcome to the MySQL monitor. Commands end with ; or /g.

Your MySQL connection id is 1

Server version: 5.5.33-log MySQL Community Server (GPL)

Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '/h' for help. Type '/c' to clear the current input statement.

mysql>

mysql> use mysql

Database changed

mysql> SELECT user,host,password from user;

+------+---------------+----------+

| user | host | password |

+------+---------------+----------+

| root | localhost | |

| root | www.jiayu.com | |

| root | 127.0.0.1 | |

| root | ::1 | |

| | localhost | |

| | www.jiayu.com | |

+------+---------------+----------+

6 rows in set (0.01 sec)

mysql> DROP USER ''@'www.jiayu.com' ;

Query OK, 0 rows affected (0.00 sec)

mysql> DROP USER ''@'localhost';

Query OK, 0 rows affected (0.00 sec)

mysql> UPDATE user SET password=PASSWORD('love') WHERE user='root';

Query OK, 4 rows affected (0.02 sec)

Rows matched: 4 Changed: 4 Warnings: 0

mysql> SELECT user,host,password from user;

+------+---------------+-------------------------------------------+

| user | host | password |

+------+---------------+-------------------------------------------+

| root | localhost | *656B19382E8A16676406422882380722D756E17A |

| root | www.jiayu.com | *656B19382E8A16676406422882380722D756E17A |

| root | 127.0.0.1 | *656B19382E8A16676406422882380722D756E17A |

| root | ::1 | *656B19382E8A16676406422882380722D756E17A |

+------+---------------+-------------------------------------------+

4 rows in set (0.00 sec)

mysql> FLUSH PRIVILEGES;《===========================================

Query OK, 0 rows affected (0.00 sec)

[root@www ~]# mysql -uroot -hlocalhost -plove

Welcome to the MySQL monitor. Commands end with ; or

[root@www ~]# vim .my.cnf

[mysql]

user=root

host=localhost

password=love

~

[root@www ~]# mysql

Welcome to the MySQL monitor. Commands end with ; or /g.

Your MySQL connection id is 3

[root@www ~]# ln -sv /usr/local/mysql/include/ /usr/include/mysql

`/usr/include/mysql' -> `/usr/local/mysql/include/'

[root@www ~]# vim /etc/ld.so.conf.d/mysql.conf

/usr/local/mysql/lib

[root@www ~]# ldconfig

[root@www ~]# ldconfig -p | grep mysql

libtcmalloc_minimal.so.0 (libc6,x86-64) => /usr/local/mysql/lib/libtcmalloc_minimal.so.0

libmysqlclient_r.so.16 (libc6,x86-64) => /usr/lib64/mysql/libmysqlclient_r.so.16

libmysqlclient.so.18 (libc6,x86-64) => /usr/local/mysql/lib/libmysqlclient.so.18

libmysqlclient.so.16 (libc6,x86-64) => /usr/lib64/mysql/libmysqlclient.so.16

libmysqlclient.so (libc6,x86-64) => /usr/local/mysql/lib/libmysqlclient.so

二、安装httpd: httpd的安装要依靠apr和apr-util所以安装之前必须先安装这两个文件。

httpd-2.4.9.tar.bz2

apr-1.5.0.tar.bz2

apr-util-1.5.3.tar.bz2

[root@www ~]# yum install pcre-devel -y

[root@www ~]# tar xf apr-1.5.0.tar.bz2

[root@www ~]# cd apr-1.5.0

[root@www apr-1.5.0]# ./configure --prefix=/usr/local/apr

[root@www apr-1.5.0]# make && make install

[root@www ~]# tar xf apr-util-1.5.3.tar.bz2

[root@www ~]# cd apr-util-1.5.3

[root@www apr-util-1.5.3]# ./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/apr/

[root@www apr-1.5.0]# make && make install

[root@www httpd-2.4.9]# ./configure --prefix=/usr/local/apache --sysconfdir=/etc/httpd24 --enable-so --enable-ssl --enable-cgi --with-zlib --with-pcre --enable-rewrite --with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util/ --enable-modules=most --enable-mpms-shared=all --with-mpm=event

[root@www httpd-2.4.9]make && make install

--prefix=/usr/local/apache

--sysconfdir=/etc/httpd24

--enable-so --enable-ssl --enable-cgi

--enable-rewrite

--with-apr=/usr/local/apr

--with-apr-util=/usr/local/apr-util/

--enable-mpms-shared=all

--with-mpm=event

[root@www httpd-2.4.9]# cd /etc/rc.d/init.d

[root@www init.d]# cp httpd httpd24

[root@www init.d]# vim httpd24

# Path to the apachectl script, server binary, and short-form for messages.

apachectl=/usr/local/apache/bin/apachectl

httpd=${HTTPD-/usr/local/apache/bin/httpd}

[root@www init.d]# chkconfig --add httpd24

[root@www init.d]# chkconfig --list httpd24

httpd24 0:off1:off2:off3:off4:off5:off6:off

[root@www ~]# vim /etc/profile.d/httpd.sh

export PATH=/usr/local/apache/bin:$PATH

[root@www ~]# . /etc/profile.d/httpd.sh

[root@www ~]# vim /etc/httpd24/httpd.conf

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used. If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

#

ServerRoot "/usr/local/apache"

pidFile "var/run/httpd/httpd.conf"

[root@www ~]# service httpd24 start

Starting httpd: [ OK ]

安装php服务器

要准备的文件

php-5.4.26.tar.bz2

xcache-3.0.3.tar.bz2

phpMyAdmin-4.0.5-all-languages.zip

[root@www ~]# tar xf php-5.4.26.tar.bz2

[root@www ~]# cd php-5.4.26

[root@www php-5.4.26]#./configure --prefix=/usr/local/php

--with-mysql=/usr/local/mysql --with-openssl --enable-fpm --enable-sockets --enable-sysvshm --with-mysqli=/usr/local/mysql/bin/mysql_config --enable-mbstring --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib-dir --with-libxml-dir=/usr --enable-xml --with-mhash --with-mcrypt --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --with-bz2 --with-curl

[root@www php-5.4.26]# make && make install

[root@www php-5.4.26]# cp php.ini-production /etc/php.ini

编辑配置文件

[root@www php-5.4.26]# vim /etc/httpd24/httpd.conf

在382行左右AddType下面如下两行

AddType application/x-httpd-php .php

AddType application/x-httpd-php-source .phps

在252行左右修改成如下

DirectoryIndex index.php index.html

root@www ~]# service httpd24 reload

Reloading httpd:

[root@www ~]# ss -tnlp

下面是测试php是不是工作正常了

[root@www ~]# cd /usr/local/apache

[root@www apache]# ls

bin build cgi-bin error htdocs icons include logs man manual modules

[root@www apache]# cd htdocs

[root@www htdocs]# ls

index.html

[root@www htdocs]# mv index.html index.php

[root@www htdocs]# ls

index.php

[root@www htdocs]# vim index.php

php

phpinfo();

?>

~ 在浏览器里打开你的服务器地址，看看是否运行正常了

本文出自 “linux” 博客，请务必保留此出处http://8519539.blog.51cto.com/8509539/1386687