问题： 一次开发过程中同事在 sptring interceptor 中获取 request body 中值，以对数据的校验和预处理等操作 、导致之后spring 在读取request body 值做数据映射时一直报 request body is null 、以此在这通过源码回顾了一下 InputStream read 的方法中的基础知
首先来看看inputStream 中 read() 源码 实现以 ByteArrayInputStream 中源码来查看：
1: inputStream read()
/**
* Reads the next byte of data from the input stream. The value byte is
* returned as an <code>int</code> in the range <code>0</code> to
* <code>255</code>. If no byte is available because the end of the stream
* has been reached, the value <code>-1</code> is returned. This method
* blocks until input data is available, the end of the stream is detected,
* or an exception is thrown.
*
* <p> A subclass must provide an implementation of this method.
*
* @return the next byte of data, or <code>-1</code> if the end of the
* stream is reached.
* @exception IOException if an I/O error occurs.
*/
public abstract int read() throws IOException;
大致意思从输入流中读取下一个字节、如果以达到末尾侧返回-1
2: ByteArrayInputStream 中实现
/**
* Reads the next byte of data from this input stream. The value
* byte is returned as an <code>int</code> in the range
* <code>0</code> to <code>255</code>. If no byte is available
* because the end of the stream has been reached, the value
* <code>-1</code> is returned.
* <p>
* This <code>read</code> method
* cannot block.
*
* @return the next byte of data, or <code>-1</code> if the end of the
* stream has been reached.
*/
public synchronized int read() {
return (pos < count) ? (buf[pos++] & 0xff) : -1;
}
这个实现看起来很好理解、 方法内pos 标识当前流每次流读取的位置、 每读取一次pos 做一次位移、直至结束返回-1: 看看 pos 的 值定义：
/**
* Creates a <code>ByteArrayInputStream</code>
* so that it uses <code>buf</code> as its
* buffer array.
* The buffer array is not copied.
* The initial value of <code>pos</code>
* is <code>0</code> and the initial value
* of <code>count</code> is the length of
* <code>buf</code>.
*
* @param buf the input buffer.
*/
public ByteArrayInputStream(byte buf[]) {
this.buf = buf;
this.pos = 0;
this.count = buf.length;
}
在这可以看到在类实例化时 给 pos 初始化 0 默认从流的的起始位置开始读！ 当然如果想从固定位置读区可以看read的其它构造方法在这就不多说了。
到这之后当流读取完成后 pos 变量已经达到流的末尾处。这是如果在读取就会直接返回 -1 、 现在很明白了、如果想在此读取流中的值只需要把 pos 的值 rest 到初始位置就可以、 OK 没问题在 inputStrean 也提供了 rest() 方法 我们一起来看看它的实现：
/**
* Resets the buffer to the marked position. The marked position
* is 0 unless another position was marked or an offset was specified
* in the constructor.
*/
public synchronized void reset() {
pos = mark;
} /**
* The currently marked position in the stream.
* ByteArrayInputStream objects are marked at position zero by
* default when constructed. They may be marked at another
* position within the buffer by the <code>mark()</code> method.
* The current buffer position is set to this point by the
* <code>reset()</code> method.
* <p>
* If no mark has been set, then the value of mark is the offset
* passed to the constructor (or 0 if the offset was not supplied).
*
* @since JDK1.1
*/
protected int mark = 0;
从这两段中不难看出rest方法是将 pos 值从新初始化为0、 当然到这还没有结束、并不是所有的流都有权限实现 rest() 方法的取决条件在 markSupported() 方法中 请看下面源码的介绍
/**
* Tests if this <code>InputStream</code> supports mark/reset. The
* <code>markSupported</code> method of <code>ByteArrayInputStream</code>
* always returns <code>true</code>.
*
* @since JDK1.1
*/
public boolean markSupported() {
return true;
}
从方法的注释上很容易看出markSupported是 mark/reset 方法的标识变量、由它来决定 mark/reset 是否可调用。
到这我们基本很清楚inputStrean 中 read() 方法了。
回头我们再来看看 request.getInputStream
/**
* Retrieves the body of the request as binary data using a
* {@link ServletInputStream}. Either this method or {@link #getReader} may
* be called to read the body, not both.
*
* @return a {@link ServletInputStream} object containing the body of the
* request
* @exception IllegalStateException
* if the {@link #getReader} method has already been called
* for this request
* @exception IOException
* if an input or output exception occurred
*/
public ServletInputStream getInputStream() throws IOException;
从源码中可以看出 request.getInputStream 方法返回的是 ServletInputStream 对象 我们在来看看 ServletInputStream 中源码的实现
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package javax.servlet;
import java.io.IOException;
import java.io.InputStream;
/**
* Provides an input stream for reading binary data from a client request,
* including an efficient <code>readLine</code> method for reading data one line
* at a time. With some protocols, such as HTTP POST and PUT, a
* <code>ServletInputStream</code> object can be used to read data sent from the
* client.
* <p>
* A <code>ServletInputStream</code> object is normally retrieved via the
* {@link ServletRequest#getInputStream} method.
* <p>
* This is an abstract class that a servlet container implements. Subclasses of
* this class must implement the <code>java.io.InputStream.read()</code> method.
*
* @see ServletRequest
*/
public abstract class ServletInputStream extends InputStream {
/**
* Does nothing, because this is an abstract class.
*/
protected ServletInputStream() {
// NOOP
}
/**
* Reads the input stream, one line at a time. Starting at an offset, reads
* bytes into an array, until it reads a certain number of bytes or reaches
* a newline character, which it reads into the array as well.
* <p>
* This method returns -1 if it reaches the end of the input stream before
* reading the maximum number of bytes.
*
* @param b
* an array of bytes into which data is read
* @param off
* an integer specifying the character at which this method
* begins reading
* @param len
* an integer specifying the maximum number of bytes to read
* @return an integer specifying the actual number of bytes read, or -1 if
* the end of the stream is reached
* @exception IOException
* if an input or output exception has occurred
*/
public int readLine(byte[] b, int off, int len) throws IOException {
if (len <= 0) {
return 0;
}
int count = 0, c;
while ((c = read()) != -1) {
b[off++] = (byte) c;
count++;
if (c == '\n' || count == len) {
break;
}
}
return count > 0 ? count : -1;
}
/**
* Has the end of this InputStream been reached?
*
* @return <code>true</code> if all the data has been read from the stream,
* else <code>false</code>
*
* @since Servlet 3.1
*/
public abstract boolean isFinished();
/**
* Can data be read from this InputStream without blocking?
* Returns If this method is called and returns false, the container will
* invoke {@link ReadListener#onDataAvailable()} when data is available.
*
* @return <code>true</code> if data can be read without blocking, else
* <code>false</code>
*
* @since Servlet 3.1
*/
public abstract boolean isReady();
/**
* Sets the {@link ReadListener} for this {@link ServletInputStream} and
* thereby switches to non-blocking IO. It is only valid to switch to
* non-blocking IO within async processing or HTTP upgrade processing.
*
* @param listener The non-blocking IO read listener
*
* @throws IllegalStateException If this method is called if neither
* async nor HTTP upgrade is in progress or
* if the {@link ReadListener} has already
* been set
* @throws NullPointerException If listener is null
*
* @since Servlet 3.1
*/
public abstract void setReadListener(ReadListener listener);
}
从源码中查看 ServletInputStream 并没有重写 rest() 方法、我们在 到 InputStream 中去查看
/**
* Repositions this stream to the position at the time the
* <code>mark</code> method was last called on this input stream.
*
* <p> The general contract of <code>reset</code> is:
*
* <ul>
* <li> If the method <code>markSupported</code> returns
* <code>true</code>, then:
*
* <ul><li> If the method <code>mark</code> has not been called since
* the stream was created, or the number of bytes read from the stream
* since <code>mark</code> was last called is larger than the argument
* to <code>mark</code> at that last call, then an
* <code>IOException</code> might be thrown.
*
* <li> If such an <code>IOException</code> is not thrown, then the
* stream is reset to a state such that all the bytes read since the
* most recent call to <code>mark</code> (or since the start of the
* file, if <code>mark</code> has not been called) will be resupplied
* to subsequent callers of the <code>read</code> method, followed by
* any bytes that otherwise would have been the next input data as of
* the time of the call to <code>reset</code>. </ul>
*
* <li> If the method <code>markSupported</code> returns
* <code>false</code>, then:
*
* <ul><li> The call to <code>reset</code> may throw an
* <code>IOException</code>.
*
* <li> If an <code>IOException</code> is not thrown, then the stream
* is reset to a fixed state that depends on the particular type of the
* input stream and how it was created. The bytes that will be supplied
* to subsequent callers of the <code>read</code> method depend on the
* particular type of the input stream. </ul></ul>
*
* <p>The method <code>reset</code> for class <code>InputStream</code>
* does nothing except throw an <code>IOException</code>.
*
* @exception IOException if this stream has not been marked or if the
* mark has been invalidated.
* @see java.io.InputStream#mark(int)
* @see java.io.IOException
*/
public synchronized void reset() throws IOException {
throw new IOException("mark/reset not supported");
}
/**
* Tests if this input stream supports the <code>mark</code> and
* <code>reset</code> methods. Whether or not <code>mark</code> and
* <code>reset</code> are supported is an invariant property of a
* particular input stream instance. The <code>markSupported</code> method
* of <code>InputStream</code> returns <code>false</code>.
*
* @return <code>true</code> if this stream instance supports the mark
* and reset methods; <code>false</code> otherwise.
* @see java.io.InputStream#mark(int)
* @see java.io.InputStream#reset()
*/
public boolean markSupported() {
return false;
}
至此我们基本搞清楚了 为什么 reqeust.getInputStream 方法只能读取一次、 因在读取一次后 pos 值已经达到文件末尾、而 ServletInputStream 没有重写 rest() 方法、从而导致request.getInputStream 只能读取一次。
解决方案其实很简单 可以使用 HttpServletRequest 的装饰器 HttpServletRequestWrapper 来解决。写一个简单例子仅供参考： 这里装饰器模式不了解的同学可以去了解下。
import java.io.BufferedReader;
import java.io.ByteArrayInputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.nio.charset.StandardCharsets;
import javax.servlet.ReadListener;
import javax.servlet.ServletInputStream;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletRequestWrapper;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
public class RequestWrapper extends HttpServletRequestWrapper {
private byte[] body;
public RequestWrapper(HttpServletRequest request) {
super(request);
}
public RequestWrapper(HttpServletRequest request, String body) {
super(request);
this.body = body.getBytes(StandardCharsets.UTF_8);
}
@Override
public ServletInputStream getInputStream() throws IOException {
final ByteArrayInputStream bais = new ByteArrayInputStream(body);
return new ServletInputStream() {
@Override
public boolean isFinished() {
// Auto-generated method stub
return false;
}
@Override
public boolean isReady() {
// Auto-generated method stub
return false;
}
@Override
public void setReadListener(ReadListener listener) {
// Auto-generated method stub
}
@Override
public int read() throws IOException {
return bais.read();
}
};
}
@Override
public BufferedReader getReader() throws IOException {
return new BufferedReader(new InputStreamReader(this.getInputStream()));
}
public String getBody() {
return new String(body, StandardCharsets.UTF_8);
}
}这是一个简单的列子、 具体使用根据自己业务来实现。
本章就介绍到这！如有不对的地方请多多指教、大家互相学习、谢谢！