欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页  >  数据库

MySQL之-CentOS6.5_x64安装配置drbd8.4.2的示例代码

程序员文章站 2022-05-29 17:11:43
...

一、主机资源:

width="600" border="1">

Name IP 配置 备注
Master 192.168.0.152 sda/10G,sdb/10G;
Slave 192.168.0.153 sda/10G,sdb/10G;

********************************************

DRBD下载地址:http://oss.linbit.com/drbd/

********************************************

、系统基本配置

master、slave都做如下配置。

1.配置/etc/hosts文件

 ~]# vi /etc/hosts

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4

::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

192.168.0.152 master
192.168.0.153 slave

2.禁用selinux:

# sed -i "7s/enforcing/disabled/" /etc/selinux/config

3.禁用或卸载iptables,这里我们将iptables禁用

1) 关闭防火墙-----service iptables stop
2)启动防火墙-----service iptables start
3)重启防火墙-----service iptables restart
4) 查看防火墙状态--service iptables status
5) 永久关闭防火墙--chkconfig iptables off
6) 永久关闭后启用--chkconfig iptables on

4.运行yum update升级内核:

# yum update
Loaded plugins: fastestmirror, presto
Loading mirror speeds from cached hostfile
 * base: mirrors.btte.NET
………

5.格式化/dev/sdb

#fdisk -l
#fdisk /dev/sdb

6.重启

reboot

三、安装DRBD 8.4.2(主备节点配置相同)

1.主备节点安装drbd编译环境:

# yum -y install gcc flex wget make kernel-devel kernel-headers Git libxslt rpm-build automake autoconf

2.下载DRBD安装文件

# wget http://oss.linbit.com/drbd/8.4/drbd-8.4.2.tar.gz

3.解压并安装DRBD文件

#tar -zvxf drbd-8.4.2.tar.gz
# cd drbd-8.4.2
drbd-8.4.2]# ./configure --prefix=/usr/local/drbd --with-km
drbd-8.4.2]# make KDIR=/usr/src/kernels/`uname -r`/
drbd-8.4.2]# make install

4.安装配置DRBD驱动模块

drbd-8.4.2]# cd drbd
drbd-8.4.2]# make clean
drbd-8.4.2]# make KDIR=/usr/src/kernels/`uname -r`/
drbd-8.4.2]# cp drbd.ko /lib/modules/`uname -r`/kernel/lib/
drbd-8.4.2]# depmod              #创建模块依赖关系的列表
drbd-8.4.2]# cp /usr/local/drbd/etc/rc.d/init.d/drbd /etc/rc.d/init.d/
drbd-8.4.2]# chkconfig --add drbd
drbd-8.4.2]# chkconfig drbd on

四、定义DRBD 配置文件 (主备节点配置相同)

~]# cp /usr/local/drbd/etc/drbd.d/global_common.conf /usr/local/drbd/etc/drbd.d/global_common-bak.conf
~]# vi /usr/local/drbd/etc/drbd.d/global_common.conf
 global {
        usage-count yes;                         # 是否参加DRBD使用者统计.默认是yes
        # minor-count dialog-refresh disable-ip-verification
}

common {
        handlers {
                pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
                pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
                local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt -f";
        }

        startup {
                wfc-timeout 30;
                degr-wfc-timeout 30;
                outdated-wfc-timeout 30;
        }

        options {
                # cpu-mask on-no-data-accessible
        }

        disk {
                on-io-error detach;
                fencing resource-and-stonith;
                resync-rate 50M;                 # 设置主备节点同步时的网络速率最大值,单位是字节.
        }

        net {
                protocol C;                 # 使用协议C.表示收到远程主机的写入确认后,则认为写入完成.
                cram-hmac-alg sha1;                  # 设置主备机之间通信使用的信息算法.
                shared-secret "123456";
        }
}
~]# vi /usr/local/drbd/etc/drbd.d/Redis.res
 resource redis{  
        on master {  
                device          /dev/drbd1; #逻辑设备的路径  
                disk            /dev/sdb;  #物理设备  
                address         192.168.0.152:7788;  #IP和监听端口
                meta-disk       internal;  
        }  
        on slave {  
                device          /dev/drbd1;  
                disk            /dev/sdb;  
                address         192.168.0.153:7788;  
                meta-disk       internal;  
        }  
}
~]# modprobe drbd                     #载入DRBD模块
~]# lsmod |grep drbd                  #确认DRBD模块载入成功
drbd                  314184  0 
libcrc32c             1246  1 drbd
~]# drbdadm create-md redis                 #创建元数据
 --==  Thank you for participating in the global usage survey  ==--
The server's response is:

you are the 4070th user to install this version
md_offset 10737414144
al_offset 10737381376
bm_offset 10737053696

Found some data

 ==> This might destroy existing data! <==

Do you want to proceed?
[need to type 'yes' to confirm] yes

Writing meta data...
initializing activity log
NOT initializing bitmap
New drbd meta data block successfully created.
success
~]# mkdir -p /usr/local/drbd/var/run/drbd
~]#  drbdadm up redis                             #启用资源
Device '1' is configured!
Command 'drbdmeta 1 v08 /dev/sdb internal apply-al' terminated with exit code 20
~]# cat /proc/drbd                                #查看DRBD状态
version: 8.4.2 (api:1/proto:86-101)
GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by , 2012-12-31 20:26:02
1: cs:Connected ro:Secondary/Secondary ds:Inconsistent/Inconsistent C r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:10485404
~]# mkdir /drbd                                   #为DRBD分区挂载创建路径

**********************************************************************************************************************

五、设置主节点Primary node(master配置)

~]# drbdadm primary --force redis               #设置master角色为Primary
~]# mkfs.ext4 /dev/drbd1                          #格式化drbd1(逻辑设备)
 mke2fs 1.41.12 (17-May-2010)
文件系统标签=
操作系统:Linux
块大小=4096 (log=2)
分块大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
655360 inodes, 2621351 blocks
131067 blocks (5.00%) reserved for the super user
第一个数据块=0
Maximum filesystem blocks=2684354560
80 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
正在写入inode表: 完成                            
Creating journal (32768 blocks):
Writing superblocks and filesystem accounting information: 完成
This filesystem will be automatically checked every 36 mounts or 180 days, whichever comes first.  
Use tune2fs -c or -i to override.
~]# mount /dev/drbd1 /drbd                             #挂载DRBD分区
~]# df -h
文件系统              容量  已用  可用 已用%% 挂载点
/dev/sda3             8.7G  1.1G  7.3G  13% /
tmpfs                 497M     0  497M   0% /dev/shm
/dev/sda1             194M   64M  120M  35% /boot
/dev/drbd1            9.9G  151M  9.2G   2% /drbd

六、同步测试:

mater操作:

 ~]# ls
anaconda-ks.cfg  drbd-8.4.2  drbd-8.4.2.tar.gz  install.log  install.log.syslog
~]# cp drbd-8.4.2.tar.gz /drbd
~]# ll /drbd
总用量 676
-rw-r--r-- 1 root root 675803 10月 15 21:14 drbd-8.4.2.tar.gz
drwx------ 2 root root  16384 10月 15 21:07 lost+found
~]# umount /dev/drbd1                    #卸载挂载的DRBD分区
~]# drbdadm secondary redis              #主节点角色降级

slave操作:

~]# drbdadm primary redis                   #备节点设置成primary角色
~]# mount /dev/drbd1 /drbd              #备节点挂载DRBD分区
~]# df -h
文件系统              容量  已用  可用 已用%% 挂载点
/dev/sda3             8.7G  1.1G  7.3G  13% /
tmpfs                 497M     0  497M   0% /dev/shm
/dev/sda1             194M   64M  120M  35% /boot
/dev/drbd1            9.9G  152M  9.2G   2% /drbd
~]# ll /drbd
总用量 676
-rw-r--r-- 1 root root 675803 10月 15 21:14 drbd-8.4.2.tar.gz
drwx------ 2 root root  16384 10月 15 21:07 lost+found

测试完成~!

以上就是MySQL之-CentOS6.5_x64安装配置drbd8.4.2的示例代码的详细内容,更多请关注其它相关文章!