欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识！
您现在的位置是： 首页

【Linux】扩展阿里云数据盘分区和文件系统

程序员文章站 2022-05-19 14:47:01
...

【Linux】扩展阿里云数据盘分区和文件系统

扩容云盘只是扩大存储容量，不会扩容文件系统

一、准备工作

在扩展数据盘扩展分区和文件系统前，请提前完成以下工作。

创建快照以备份数据，防止操作失误导致数据丢失。
通过ECS控制台或者API扩容云盘容量。

二、确认分区格式和文件系统

ECS实例的操作系统为CentOS 6.8 64 位，数据盘设备名为/dev/vdb。

1.运行fdisk -lu 确认数据盘是否分区。

本示例中，原有的数据盘空间已做分区/dev/vdb1。“System”=“Linux"说明数据盘使用的是MBR分区格式，如果"System”="GPT"则说明数据盘使用的是GPT格式。

[aaa@qq.com ~]# fdisk -lu /dev/vdb
 
Disk /dev/vdb: 1374.4 GB, 1374389534720 bytes
16 heads, 63 sectors/track, 2663050 cylinders, total 2684354560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7c4016b5
 
   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1              63  2147483519  1073741728+  83  Linux

2、运行blkid 确认文件系统的类型。

本示例中，/dev/vdb1的文件系统类型为ext4。

[aaa@qq.com ~]# blkid /dev/vdb1
/dev/vdb1: UUID="ee04ddf2-ad0f-40bc-9b5c-984be7e19283" TYPE="ext4"

说明 未分区并且未创建文件系统的数据盘，以及已分区但未创建文件系统的数据盘，不会返回结果。

[aaa@qq.com ~]# blkid /dev/vdb1
[aaa@qq.com ~]#
运行以下命令确认文件系统的状态。

ext*文件系统：e2fsck -n <dst_dev_part_path>
xfs文件系统：xfs_repair -n <dst_dev_part_path>
警告 本示例中，文件系统状态为clean。如果状态不是clean，请排查并修复。

[aaa@qq.com~]# e2fsck -n /dev/vdb1
e2fsck 1.41.12 (17-May-2010)
/dev/vdb1: clean, 115952/67108864 files, 140800686/268435432 blocks

三、扩展已有MBR分区

说明 为了防止数据丢失，不建议扩容已挂载的分区和文件系统。请先取消挂载（umount）分区，完成扩容并正常使用后，重新挂载（mount）。针对不同的Linux内核版本，推荐以下操作方式：

实例内核版本 < 3.6：先取消挂载该分区，再修改分区表，最后扩容文件系统。
实例内核版本 ≥ 3.6：先修改对应分区表，再通知内核更新分区表，最后扩容文件系统。
如果新增空间用于扩容已有的MBR分区，按照以下步骤在实例中完成扩容：

1.修改分区表

查看磁盘信息

[aaa@qq.com~]# fdisk -lu /dev/vdb
 
Disk /dev/vdb: 1374.4 GB, 1374389534720 bytes
16 heads, 63 sectors/track, 2663050 cylinders, total 2684354560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7c4016b5
 
   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1              63  2147483519  1073741728+  83  Linux

查看数据盘的挂载路径，根据返回的文件路径卸载分区，直至完全卸载已挂载的分区。

[aaa@qq.com ~]# mount | grep "/dev/vdb"
/dev/vdb1 on /data type ext4 (rw,relatime,data=ordered)
[aaa@qq.com ~]# umount /dev/vdb1
[aaa@qq.com ~]# mount | grep "/dev/vdb"

使用fdisk工具删除旧分区。

运行fdisk -u /dev/vdb：分区数据盘。
输入p：打印分区表。
输入d：删除分区。
输入p：确认分区已删除。
输入w：保存修改并退出。

[aaa@qq.com~]# fdisk -u /dev/vdb
 
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c').
 
Command (m for help): p
 
Disk /dev/vdb: 1374.4 GB, 1374389534720 bytes
16 heads, 63 sectors/track, 2663050 cylinders, total 2684354560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7c4016b5
 
   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1              63  2147483519  1073741728+  83  Linux
 
Command (m for help): d
Selected partition 1
 
Command (m for help): p
 
Disk /dev/vdb: 1374.4 GB, 1374389534720 bytes
16 heads, 63 sectors/track, 2663050 cylinders, total 2684354560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7c4016b5
 
   Device Boot      Start         End      Blocks   Id  System
 
Command (m for help): w
The partition table has been altered!
 
Calling ioctl() to re-read partition table.
Syncing disks.

使用fdisk命令新建分区。

运行fdisk -u /dev/vdb：分区数据盘。
输入p：打印分区表。
输入n：新建分区。
输入p：选择分区类型为主分区。
输入<分区号>：选择分区号。本示例选取了1。警告 新分区的起始位置必须和旧分区的起始位置相同，结束位置必须大于旧分区的结束位置，否则会导致扩容失败。
输入w：保存修改并退出。
本示例中，将/dev/vdb1由1024 GiB扩容到1280 GiB。

[aaa@qq.com~]# fdisk -u /dev/vdb
 
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c').
 
Command (m for help): p
 
Disk /dev/vdb: 1374.4 GB, 1374389534720 bytes
16 heads, 63 sectors/track, 2663050 cylinders, total 2684354560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7c4016b5
 
   Device Boot      Start         End      Blocks   Id  System
 
Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): w
Partition number (1-4): 1
First sector (63-2684354559, default 63):
Using default value 63
Last sector, +sectors or +size{K,M,G} (63-2684354559, default 2684354559):
Using default value 2684354559
 
Command (m for help): w
The partition table has been altered!
 
Calling ioctl() to re-read partition table.
Syncing disks.

运行lsblk /dev/vdb确保分区表已经增加。

运行e2fsck -n /dev/vdb1再次检查文件系统，确认扩容分区后的文件系统状态为clean。

2.通知内核更新分区表

运行partprobe <dst_dev_path>或者partx -u <dst_dev_path>，以通知内核数据盘的分区表已经修改，需要同步更新。

3.扩容文件系统

ext*文件系统（例如ext3和ext4）：运行resize2fs /dev/vdb1并重新挂载分区。

[aaa@qq.com ~]# resize2fs /dev/vdb1
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /dev/vdb1 to 7864320 (4k) blocks.
The filesystem on /dev/vdb1 is now 7864320 blocks long.
[aaa@qq.com ~]# mount /dev/vdb1 /data

xfs文件系统：先运行mount /dev/vdb1 /data/命令，再运行xfs_growfs /dev/vdb1。

[aaa@qq.com ~]# mount /dev/vdb1 /data/
[aaa@qq.com ~]# xfs_growfs /dev/vdb1
meta-data=/dev/vdb1              isize=512    agcount=4, agsize=1310720 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0 spinodes=0
data     =                       bsize=4096   blocks=5242880, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal               bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
data blocks changed from 5242880 to 7864320

四、新增并格式化MBR分区

如果新增空间用于增加新的MBR分区，按照以下步骤在实例中完成扩容：

运行fdisk -u /dev/vdb命令新建分区。

本示例中，为新增的20GiB新建分区，作为/dev/vdb2使用。

[aaa@qq.com ~]# fdisk -u /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
 
Changes will remain in memory only, until you decide to write them.
Be careful before using the write commad.
 
Command (m for help): p
 
Disk /dev/vdb: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x2b31a2a3
 
   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1            2048    41943039    20970496   83  Linux
 
Command (m for help): n
Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): p
Partition number (2-4, default 2): 2
First sector (41943040-83886079, default 41943040):
Using default value 41943040
Last sector, +sectors or +size{K,M,G} (41943040-83886079, default 83886079):
Using default value 83886079
Partition 2 of type Linux and of size 20 GiB is set
 
Command (m for help): w
The partition table has been altered!
 
Calling ioctl() to re-read partition table.
Syncing disks.

运行命令lsblk /dev/vdb查看分区。

[aaa@qq.com ~]# lsblk /dev/vdb
NAME   MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb    253:16   0  40G  0 disk
├─vdb1 253:17   0  20G  0 part
└─vdb2 253:18   0  20G  0 part

格式化新的分区。

创建ext4文件系统：mkfs.ext4 /dev/vdb2

[aaa@qq.com ~]# mkfs.ext4 /dev/vdb2
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5242880 blocks
262144 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2153775104
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000
 
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[aaa@qq.com ~]# blkid /dev/vdb2
/dev/vdb2: UUID="e3f336dc-d534-4fdd-****-b6ff1a55bdbb" TYPE="ext4"

创建ext3文件系统：mkfs.ext3 /dev/vdb2

[aaa@qq.com ~]# mkfs.ext3 /dev/vdb2
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5242880 blocks
262144 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000
 
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[aaa@qq.com ~]# blkid /dev/vdb2
/dev/vdb2: UUID="dd5be97d-a630-4593-****-5056def914ea" SEC_TYPE="ext2" TYPE="ext3"

创建xfs文件系统：mkfs.xfs -f /dev/vdb2

[aaa@qq.com ~]# mkfs.xfs -f /dev/vdb2
meta-data=/dev/vdb2              isize=512    agcount=4, agsize=1310720 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0, sparse=0
data     =                       bsize=4096   blocks=5242880, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
[aaa@qq.com ~]# blkid /dev/vdb2
/dev/vdb2: UUID="66251477-3ae4-4b44-****-5604420dbecb" TYPE="xfs"

创建btrfs文件系统：mkfs.btrfs /dev/vdb2

[aaa@qq.com ~]# mkfs.btrfs /dev/vdb2
btrfs-progs v4.9.1
See http://btrfs.wiki.kernel.org for more information.
 
Label:              (null)
UUID:               6fb5779b-57d7-4aaf-bf09-82b46f54a429
Node size:          16384
Sector size:        4096
Filesystem size:    20.00GiB
Block group profiles:
  Data:             single            8.00MiB
  Metadata:         DUP               1.00GiB
  System:           DUP               8.00MiB
SSD detected:       no
Incompat features:  extref, skinny-metadata
Number of devices:  1
Devices:
   ID        SIZE  PATH
    1    20.00GiB  /dev/vdb2
[aaa@qq.com ~]# blkid /dev/vdb2
/dev/vdb2: UUID="6fb5779b-57d7-4aaf-****-82b46f54a429" UUID_SUB="9bdd889a-ab69-4653-****-d1b6b8723378" TYPE="btrfs"

运行mount /dev/vdb2 /mnt挂载文件系统。

运行df -h查看目前数据盘空间和使用情况。

显示新建文件系统的信息，表示挂载成功。

[aaa@qq.com ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vda1 40G 1.6G 36G 5% /
devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 3.9G 460K 3.9G 1% /run
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/vdb2 9.8G 37M 9.2G 1% /mnt
tmpfs 783M 0 783M 0% /run/user/0

五、重点来了，如果磁盘没有分区，但是有数据怎么办，怎么办？

1、查看磁盘情况

[aaa@qq.com ~]# fdisk -lu /dev/vdb
 
Disk /dev/vdb: 1374.4 GB, 1374389534720 bytes
16 heads, 63 sectors/track, 2663050 cylinders, total 2684354560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
 
[aaa@qq.com ~]# blkid /dev/vdb
/dev/vdb: UUID="c7a3bad3-c0f9-4cdc-9778-15abb90953ab" SEC_TYPE="ext2" TYPE="ext3"
[aaa@qq.com ~]# lsblk /dev/vdb
NAME MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
vdb  252:16   0  1.3T  0 disk

2、直接扩容

[aaa@qq.com ~]# e2fsck -f /dev/vdb
e2fsck 1.41.12 (17-May-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/vdb: 115952/67108864 files (32.8% non-contiguous), 140800686/268435432 blocks
[aaa@qq.com ~]#
[aaa@qq.com ~]# resize2fs /dev/vdb
resize2fs 1.41.12 (17-May-2010)
Resizing the filesystem on /dev/vdb1 to 335544312 (4k) blocks.
The filesystem on /dev/vdb is now 335544312 blocks long.

【Linux】扩展阿里云数据盘分区和文件系统

相关标签： 最新技术分享

上一篇： php的session垃圾回收机制

下一篇： java开发RtspClient

推荐阅读