欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识！
您现在的位置是： 首页

Kubernetes 使用kubeadm创建集群

程序员文章站 2022-03-07 19:29:49
...

镜像下载、域名解析、时间同步请点击 阿里巴巴开源镜像站

实践环境

CentOS-7-x86_64-DVD-1810

Docker 19.03.9

Kubernetes version: v1.20.5

开始之前

1台Linux操作或更多，兼容运行deb,rpm

确保每台机器2G内存或以上

确保当控制面板的结点机，其CPU核数为双核或以上

确保集群中的所有机器网络互连

目标

  • 安装一个Kubernetes集群控制面板
  • 基于集群安装一个Pod networ以便集群之间可以相互通信

    安装指导

    安装Docker

    安装过程略

注意，安装docker时，需要指Kubenetes支持的版本（参见如下），如果安装的docker版本过高导致，会提示以下问题

  1. WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.5. Latest validated version: 19.03

安装docker时指定版本

  1. sudo yum install docker-ce-19.03.9 docker-ce-cli-19.03.9 containerd.io

如果没有安装docker，运行kubeadm init时会提示以下问题

    

  1. cannot automatically set CgroupDriver when starting the Kubelet: cannot execute 'docker info -f {{.CgroupDriver}}': executable file not found in $PATH
    2. 

    3. 

  3. [preflight] WARNING: Couldn't create the interface used for talking to the container runtime: docker is required for container runtime: exec: "docker": executable file not found in $PATH
    4.

安装kubeadm

如果没有安装的话，先安装kubeadm，如果已安装，可通过apt-get update && apt-get upgrade或yum update命令更新kubeadm最新版

注意：更新kubeadm过程中，kubelet每隔几秒中就会重启，这个是正常现象。

其它前置操作

关闭防火墙

  1. # systemctl stop firewalld && systemctl disable firewalld

运行上述命令停止并禁用防火墙，否则运行kubeadm init时会提示以下问题

  1. [WARNING Firewalld]: firewalld is active, please ensure ports [6443 10250] are open or your cluster may not function correctly

修改/etc/docker/daemon.json文件

编辑/etc/docker/daemon.json文件，添加以下内容

    

  1. {
    2. 

  2. "exec-opts":["native.cgroupdriver=systemd"]
    3. 

  3. }
    4.

然后执行systemctl restart docker命令重启docker

如果不执行以上操作，运行kubeadm init时会提示以下问题

  1. [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/

安装socat，conntrack等依赖软件包

  1. # yum install socat conntrack-tools

如果按未安装上述依赖包，运行kubeadm init时会提示以下问题

    

  1. [WARNING FileExisting-socat]: socat not found in system path
    2. 

  2. error execution phase preflight: [preflight] Some fatal errors occurred:`
    3. 

  3. [ERROR FileExisting-conntrack]: conntrack not found in system path`
    4.

设置net.ipv4.ip_forward值为1

设置net.ipv4.ip_forward值为1，具体如下

    

  1. # sysctl -w net.ipv4.ip_forward=1
    2. 

  2. net.ipv4.ip_forward = 1
    3.

说明：net.ipv4.ip_forward如果为0，则表示禁止转发数据包，为1则表示允许转发数据包，如果net.ipv4.ip_forward值不为1，运行kubeadm init时会提示以下问题

  1. ERROR FileContent--proc-sys-net-ipv4-ip_forward]: /proc/sys/net/ipv4/ip_forward contents are not set to 1

以上配置临时生效，为了避免重启机器后失效，进行如下设置

  1. # echo "net.ipv4.ip_forward=1" >> /etc/sysctl.conf

注意：网上有推荐以下方式进行永久配置的，但是笔者试过，实际不起作用

    

  1. # echo "sysctl -w net.ipv4.ip_forward=1" >> /etc/rc.local 
    2. 

  2. # chmod +x /etc/rc.d/rc.local
    3.

设置net.bridge.bridge-nf-call-iptables值为1

做法参考 net.ipv4.ip_forward设置

注意：上文操作，在每个集群结点都要实施一次

初始化控制面板结点

控制面板组件运行的机器，称之为控制面板结点，包括 etcd (集群数据库) 和 API Server (供 kubectl 命令行工具调用）

1、(推荐)如果打算升级单个控制面板kubeadm集群为高可用版(high availability)，应该为kubeadm init指定—control-plane-endpoint参数选项以便为所有控制面板结点设置共享endpont。该endpont可以是DNS名称或者本地负载均衡IP地址。

2、选择一个网络插件，并确认该插件是否需要传递参数给 kubeadm init，这取决于你所选插件，比如使用flannel，就必须为kubeadm init指定—pod-network-cidr参数选项

3、(可选)1.14版本开始， kubeadm会自动检测容器运行时，如果需要使用不同的容器运行时，或者有多于1个容器运行时的情况下，需要为kubeadm init指定—cri-socket参数选项

4、(可选)除非指定了其它的，kubeadm使用与默认网关关联的网络接口为指定控制面板结点API服务器设置advertise地址。如果需要指定其它的网络接口，需要为kubeadm init指定apiserver-advertise-address=<ip-address>参数选项。发布IPV6 Kubernetes集群，需要为kubeadm init指定—apiserver-advertise-address参数选项，以设置IPv6地址，形如 —apiserver-advertise-address=fd00::101

5、(可选)运行kubeadm init之前，先运行kubeadm config images pull，以确认可连接到gcr.io容器镜像注册中心

如下，带参数运行kubeadm init以便初始化控制面板结点机，运行该命令时会先执行一系列的预检，以确保机器满足运行kubernetes。如果预检发现错误，则自动退出程序，否则继续执行，下载并安装集群控制面板组件。这可能会花费几分钟

    

  1. # kubeadm init --image-repository=registry.aliyuncs.com/google_containers --kubernetes-version stable  --pod-network-cidr=10.244.0.0/16
    2. 

  2. [init] Using Kubernetes version: v1.20.5
    3. 

  3. [preflight] Running pre-flight checks
    4. 

  4. [preflight] Pulling images required for setting up a Kubernetes cluster
    5. 

  5. [preflight] This might take a minute or two, depending on the speed of your internet connection
    6. 

  6. [preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
    7. 

  7. [certs] Using certificateDir folder "/etc/kubernetes/pki"
    8. 

  8. [certs] Generating "ca" certificate and key
    9. 

  9. [certs] Generating "apiserver" certificate and key
    10. 

  10. [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost.localdomain] and IPs [10.96.0.1 10.118.80.93]
    11. 

  11. [certs] Generating "apiserver-kubelet-client" certificate and key
    12. 

  12. [certs] Generating "front-proxy-ca" certificate and key
    13. 

  13. [certs] Generating "front-proxy-client" certificate and key
    14. 

  14. [certs] Generating "etcd/ca" certificate and key
    15. 

  15. [certs] Generating "etcd/server" certificate and key
    16. 

  16. [certs] etcd/server serving cert is signed for DNS names [localhost localhost.localdomain] and IPs [10.118.80.93 127.0.0.1 ::1]
    17. 

  17. [certs] Generating "etcd/peer" certificate and key
    18. 

  18. [certs] etcd/peer serving cert is signed for DNS names [localhost localhost.localdomain] and IPs [10.118.80.93 127.0.0.1 ::1]
    19. 

  19. [certs] Generating "etcd/healthcheck-client" certificate and key
    20. 

  20. [certs] Generating "apiserver-etcd-client" certificate and key
    21. 

  21. [certs] Generating "sa" key and public key
    22. 

  22. [kubeconfig] Using kubeconfig folder "/etc/kubernetes"
    23. 

  23. [kubeconfig] Writing "admin.conf" kubeconfig file
    24. 

  24. [kubeconfig] Writing "kubelet.conf" kubeconfig file
    25. 

  25. [kubeconfig] Writing "controller-manager.conf" kubeconfig file
    26. 

  26. [kubeconfig] Writing "scheduler.conf" kubeconfig file
    27. 

  27. [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
    28. 

  28. [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
    29. 

  29. [kubelet-start] Starting the kubelet
    30. 

  30. [control-plane] Using manifest folder "/etc/kubernetes/manifests"
    31. 

  31. [control-plane] Creating static Pod manifest for "kube-apiserver"
    32. 

  32. [control-plane] Creating static Pod manifest for "kube-controller-manager"
    33. 

  33. [control-plane] Creating static Pod manifest for "kube-scheduler"
    34. 

  34. [etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
    35. 

  35. [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
    36. 

  36. [kubelet-check] Initial timeout of 40s passed.
    37. 

  37. [apiclient] All control plane components are healthy after 89.062309 seconds
    38. 

  38. [upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
    39. 

  39. [kubelet] Creating a ConfigMap "kubelet-config-1.20" in namespace kube-system with the configuration for the kubelets in the cluster
    40. 

  40. [upload-certs] Skipping phase. Please see --upload-certs
    41. 

  41. [mark-control-plane] Marking the node localhost.localdomain as control-plane by adding the labels "node-role.kubernetes.io/master=''" and "node-role.kubernetes.io/control-plane='' (deprecated)"
    42. 

  42. [mark-control-plane] Marking the node localhost.localdomain as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
    43. 

  43. [bootstrap-token] Using token: 1sh85v.surdstc5dbrmp1s2
    44. 

  44. [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
    45. 

  45. [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
    46. 

  46. [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
    47. 

  47. [bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
    48. 

  48. [bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
    49. 

  49. [bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
    50. 

  50. [kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
    51. 

  51. [addons] Applied essential addon: CoreDNS
    52. 

  52. [addons] Applied essential addon: kube-proxy
    53. 

    54. 

  54. Your Kubernetes control-plane has initialized successfully!
    55. 

    56. 

  56. To start using your cluster, you need to run the following as a regular user:
    57. 

    58. 

  58.   mkdir -p $HOME/.kube
    59. 

  59.   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    60. 

  60.   sudo chown $(id -u):$(id -g) $HOME/.kube/config
    61. 

    62. 

  62. Alternatively, if you are the root user, you can run:
    63. 

    64. 

  64.   export KUBECONFIG=/etc/kubernetes/admin.conf
    65. 

    66. 

  66. You should now deploy a pod network to the cluster.
    67. 

  67. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
    68. 

  68.   https://kubernetes.io/docs/concepts/cluster-administration/addons/
    69. 

    70. 

  70. Then you can join any number of worker nodes by running the following on each as root:
    71. 

  71. kubeadm join 10.118.80.93:6443 --token ap4vvq.8xxcc0uea7dxbjlo \     
    72. 

  72.     --discovery-token-ca-cert-hash sha256:c4493c04d789463ecd25c97453611a9dfacb36f4d14d5067464832b9e9c5039a
    73.

如上，命令输出Your Kubernetes control-plane has initialized successfully!及其它提示，告诉我们初始化控制面板结点成功。

注意：

1、如果不使用—image-repository选项指定阿里云镜像，可能会报类似如下错误

    

  1. failed to pull image "k8s.gcr.io/kube-apiserver:v1.20.5": output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
    2. 

  2. , error: exit status 1
    3.

2、因为使用flannel网络插件，必须指定—pod-network-cidr配置选项，否则名为coredns-xxxxxxxxxx-xxxxx的Pod无法启动，一直处于ContainerCreating状态，查看详细信息，可见类似如下错误信息

  1. networkPlugin cni failed to set up pod "coredns-7f89b7bc75-9vrrl_kube-system" network: open /run/flannel/subnet.env: no such file or directory

3、—pod-network-cidr选项参数，即Pod网络不能和宿主主机网络相同，否则安装flannel插件后会导致路由重复，进而导致XShell等工具无法ssh宿主机，如下：

实践宿主主机网络 10.118.80.0/24，网卡接口 ens33

--pod-network-cidr=10.118.80.0/24

4、另外，需要特别注意的是，`--pod-network-cidr的选项参数，必须和kube-flannel.yml文件中的net-conf.json.Network键值保持一致(本例中，键值如下所示，为10.244.0.0/16，所以运行kubeadm init命令时，--pod-network-cidr选项参数值设置为10.244.0.0/16)

    

  1. # cat kube-flannel.yml|grep -E "^\s*\"Network"
    2. 

  2.       "Network": "10.244.0.0/16",
    3.

初次实践时，设置—pod-network-cidr=10.1.15.0/24，未修改kube-flannel.yml中Network键值，新加入集群的结点，无法自动获取pod cidr，如下

    

  1. # kubectl get pods --all-namespaces
    2. 

  2. NAMESPACE              NAME                                            READY   STATUS             RESTARTS   AGE
    3. 

  3. kube-system   kube-flannel-ds-psts8                           0/1     CrashLoopBackOff   62         15h
    4. 

  4. ...略
    5. 

  5. # kubectl -n kube-system logs kube-flannel-ds-psts8
    6. 

  6. ...略
    7. 

  7. E0325 01:03:08.190986       1 main.go:292] Error registering network: failed to acquire lease: node "k8snode1" pod cidr not assigned
    8. 

  8. W0325 01:03:08.192875       1 reflector.go:424] github.com/coreos/flannel/subnet/kube/kube.go:300: watch of *v1.Node ended with: an error on the server ("unable to decode an event from the watch stream: context canceled") has prevented the request from succeeding
    9. 

  9. I0325 01:03:08.193782       1 main.go:371] Stopping shutdownHandler...
    10.

后面尝试修改kube-flannel.yml中`net-conf.json.Network键值为10.1.15.0/24还是一样的提示(先下载kube-flannel.yml，然后进行配置修改，再安装网络插件)

针对上述 node “xxxxxx” pod cidr not assigned的问题，网上也有临时解决方案(笔者未验证)，即为结点手动分配podCIDR，命令如下：

  1. kubectl patch node <NODE_NAME> -p '{"spec":{"podCIDR":"<SUBNET>"}}'

5、参照输出提示，为了让非root用户也可以正常执行kubectl，运行以下命令

    

  1. # mkdir -p $HOME/.kube
    2. 

  2. # sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    3. 

  3. # sudo chown $(id -u):$(id -g) $HOME/.kube/config
    4.

可选的，如果是root用户，可运行以下命令

  1. export KUBECONFIG=/etc/kubernetes/admin.conf

记录kubeadm init输出中的kubeadm join，后面需要用该命令添加结点到集群中

token用于控制面板结点和加入集群的结点之间的相互认证。需要安全保存，因为任何拥有该token的人都可以添加认证结点到集群中。 可用 kubeadm token展示，创建和删除该token。命令详情参考kubeadm reference guide.

安装Pod网络插件

必须基于Pod网络发布一个 Container Network Interface (CNI) ，以便Pod之间可相互通信。Pod网络安装之前，不会启动Cluster DNS (CoreDNS)

  • 注意Pod 网络不能和主机网络重叠，如果重叠，会出问题（如果发现网络发现网络插件的首选Pod网络与某些主机网络之间发生冲突，则应考虑使用合适的CIDR块，然后在执行kubeadm init时，增加—pod-network-cidr选项替换网络插件YAML中的网络配置.
  • 默认的, kubeadm 设置集群强制使用 RBAC (基于角色访问控制)。确保Pod网络插件及用其发布的任何清单支持RBAC
  • 如果让集群使用IPv6—dual-stack，或者仅single-stack IPv6 网络，确保往插件支持IPv6. CNI v0.6.0中添加了IPv6的支持。
    好些项目使用CNI提供提供Kubernetes网络支持，其中一些也支持网络策略，以下是实现了Kubernetes网络模型的插件列表查看地址：

https://kubernetes.io/docs/concepts/cluster-administration/networking/#how-to-implement-the-kubernetes-networking-model

可在控制面板结点机上或者拥有kubeconfig 凭据的结点机上通过执行下述命令安装一个Pod网络插件，该插件直接以daemonset的方式安装，并且会把配置文件写入/etc/cni/net.d目录：

  1. kubectl apply -f <add-on.yaml>

flannel网络插件安装

手动发布flannel(Kubernetes v1.17+)

    

  1. # kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
    2. 

  2. podsecuritypolicy.policy/psp.flannel.unprivileged created
    3. 

  3. clusterrole.rbac.authorization.k8s.io/flannel created
    4. 

  4. clusterrolebinding.rbac.authorization.k8s.io/flannel created
    5. 

  5. serviceaccount/flannel created
    6. 

  6. configmap/kube-flannel-cfg created
    7. 

  7. daemonset.apps/kube-flannel-ds created
    8.

参考连接：https://github.com/flannel-io/flannel#flannel

每个集群只能安装一个Pod网络，Pod网络安装完成后，可通过执行kubectl get pods —all-namespaces命令，查看命令输出中coredns-xxxxxxxxxx-xxx Pod是否处于Running来判断网络是否正常

查看flannel子网环境配置信息

    

  1. # cat /run/flannel/subnet.env
    2. 

  2. FLANNEL_NETWORK=10.244.0.0/16
    3. 

  3. FLANNEL_SUBNET=10.244.0.1/24
    4. 

  4. FLANNEL_MTU=1450
    5. 

  5. FLANNEL_IPMASQ=true
    6.

flannel网络插件安装完成后，宿主机上会自动增加两个虚拟网卡：cni0 和 flannel.1

    

  1. # ifconfig -a
    2. 

  2. cni0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
    3. 

  3.         inet 10.244.0.1  netmask 255.255.255.0  broadcast 10.244.0.255
    4. 

  4.         inet6 fe80::705d:43ff:fed6:80c9  prefixlen 64  scopeid 0x20<link>
    5. 

  5.         ether 72:5d:43:d6:80:c9  txqueuelen 1000  (Ethernet)
    6. 

  6.         RX packets 312325  bytes 37811297 (36.0 MiB)
    7. 

  7.         RX errors 0  dropped 0  overruns 0  frame 0
    8. 

  8.         TX packets 356346  bytes 206539626 (196.9 MiB)
    9. 

  9.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    10. 

    11. 

  11. docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
    12. 

  12.         inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
    13. 

  13.         inet6 fe80::42:e1ff:fec3:8b6a  prefixlen 64  scopeid 0x20<link>
    14. 

  14.         ether 02:42:e1:c3:8b:6a  txqueuelen 0  (Ethernet)
    15. 

  15.         RX packets 0  bytes 0 (0.0 B)
    16. 

  16.         RX errors 0  dropped 0  overruns 0  frame 0
    17. 

  17.         TX packets 3  bytes 266 (266.0 B)
    18. 

  18.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    19. 

    20. 

  20. ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    21. 

  21.         inet 10.118.80.93  netmask 255.255.255.0  broadcast 10.118.80.255
    22. 

  22.         inet6 fe80::6ff9:dbee:6b27:1315  prefixlen 64  scopeid 0x20<link>
    23. 

  23.         ether 00:0c:29:d3:3b:ef  txqueuelen 1000  (Ethernet)
    24. 

  24.         RX packets 2092903  bytes 1103282695 (1.0 GiB)
    25. 

  25.         RX errors 0  dropped 0  overruns 0  frame 0
    26. 

  26.         TX packets 969483  bytes 253273828 (241.5 MiB)
    27. 

  27.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    28. 

    29. 

  29. flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
    30. 

  30.         inet 10.244.0.0  netmask 255.255.255.255  broadcast 10.244.0.0
    31. 

  31.         inet6 fe80::a49a:2ff:fe38:3e4b  prefixlen 64  scopeid 0x20<link>
    32. 

  32.         ether a6:9a:02:38:3e:4b  txqueuelen 0  (Ethernet)
    33. 

  33.         RX packets 0  bytes 0 (0.0 B)
    34. 

  34.         RX errors 0  dropped 0  overruns 0  frame 0
    35. 

  35.         TX packets 0  bytes 0 (0.0 B)
    36. 

  36.         TX errors 0  dropped 8 overruns 0  carrier 0  collisions 0
    37. 

    38. 

  38. lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
    39. 

  39.         inet 127.0.0.1  netmask 255.0.0.0
    40. 

  40.         inet6 ::1  prefixlen 128  scopeid 0x10<host>
    41. 

  41.         loop  txqueuelen 1000  (Local Loopback)
    42. 

  42.         RX packets 30393748  bytes 5921348235 (5.5 GiB)
    43. 

  43.         RX errors 0  dropped 0  overruns 0  frame 0
    44. 

  44.         TX packets 30393748  bytes 5921348235 (5.5 GiB)
    45. 

  45.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    46.

重新初始化控制面板结点

实践过程中因选项配置不对，在网络插件安装后才发现需要，需要重新执行kubeadm init命令。具体实践操作如下：

    

  1. # kubeadm reset
    2. 

  2. [reset] Reading configuration from the cluster...
    3. 

  3. [reset] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
    4. 

  4. [reset] WARNING: Changes made to this host by 'kubeadm init' or 'kubeadm join' will be reverted.
    5. 

  5. [reset] Are you sure you want to proceed? [y/N]: y
    6. 

  6. [preflight] Running pre-flight checks
    7. 

  7. [reset] Removing info for node "localhost.localdomain" from the ConfigMap "kubeadm-config" in the "kube-system" Namespace
    8. 

  8. [reset] Stopping the kubelet service
    9. 

  9. [reset] Unmounting mounted directories in "/var/lib/kubelet"
    10. 

  10. [reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
    11. 

  11. [reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
    12. 

  12. [reset] Deleting contents of stateful directories: [/var/lib/etcd /var/lib/kubelet /var/lib/dockershim /var/run/kubernetes /var/lib/cni]
    13. 

    14. 

  14. The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.d
    15. 

    16. 

  16. The reset process does not reset or clean up iptables rules or IPVS tables.
    17. 

  17. If you wish to reset iptables, you must do so manually by using the "iptables" command.
    18. 

    19. 

  19. If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar)
    20. 

  20. to reset your system's IPVS tables.
    21. 

    22. 

  22. The reset process does not clean your kubeconfig files and you must remove them manually.
    23. 

  23. Please, check the contents of the $HOME/.kube/config file.
    24. 

  24. # rm -rf /etc/cni/net.d
    25. 

  25. # rm -f $HOME/.kube/config
    26. 

  26. #
    27.

执行完上述命令后，需要重新执行 初始化控制面板结点操作，并且重新安装网络插件

遇到的问题总结

重新执行kubeadm init命令后，执行kubectl get pods —all-namespaces查看Pod状态，发现coredns-xxxxxxxxxx-xxxxxx状态为ContainerCreating，如下

    

  1. # kubectl get pods --all-namespaces
    2. 

  2. NAMESPACE     NAME                                            READY   STATUS              RESTARTS   AGE
    3. 

  3. kube-system   coredns-7f89b7bc75-pxvdx                        0/1     ContainerCreating   0          8m33s
    4. 

  4. kube-system   coredns-7f89b7bc75-v4p57                        0/1     ContainerCreating   0          8m33s
    5. 

  5. kube-system   etcd-localhost.localdomain                      1/1     Running             0          8m49s
    6. 

  6. ...略
    7.

执行kubectl describe pod coredns-7f89b7bc75-pxvdx -n kube-system命令查看对应Pod详细信息，发现如下错误：

  1. Warning  FailedCreatePodSandBox  98s (x4 over 103s)    kubelet            (combined from similar events): Failed to create pod sandbox: rpc error: code = Unknown desc = failed to set up sandbox container "04434c63cdf067e698a8a927ba18e5013d2a1a21afa642b3cddedd4ff4592178" network for pod "coredns-7f89b7bc75-pxvdx": networkPlugin cni failed to set up pod "coredns-7f89b7bc75-pxvdx_kube-system" network: failed to set bridge addr: "cni0" already has an IP address different from 10.1.15.1/24

如下，查看网卡信息，发现 cni0已分配了IP地址（网络插件上次分配的），导致本次网络插件给它设置IP失败。

    

  1. # ifconfig -a
    2. 

  2. cni0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
    3. 

  3.         inet 10.118.80.1  netmask 255.255.255.0  broadcast 10.118.80.255
    4. 

  4.         inet6 fe80::482d:65ff:fea6:32fd  prefixlen 64  scopeid 0x20<link>
    5. 

  5.         ether 4a:2d:65:a6:32:fd  txqueuelen 1000  (Ethernet)
    6. 

  6.         RX packets 267800  bytes 16035849 (15.2 MiB)
    7. 

  7.         RX errors 0  dropped 0  overruns 0  frame 0
    8. 

  8.         TX packets 116238  bytes 10285959 (9.8 MiB)
    9. 

  9.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    10. 

    11. 

  11. ...略
    12. 

  12. flannel.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
    13. 

  13.         inet 10.1.15.0  netmask 255.255.255.255  broadcast 10.1.15.0
    14. 

  14.         inet6 fe80::a49a:2ff:fe38:3e4b  prefixlen 64  scopeid 0x20<link>
    15. 

  15.         ether a6:9a:02:38:3e:4b  txqueuelen 0  (Ethernet)
    16. 

  16.         RX packets 0  bytes 0 (0.0 B)
    17. 

  17.         RX errors 0  dropped 0  overruns 0  frame 0
    18. 

  18.         TX packets 0  bytes 0 (0.0 B)
    19. 

  19.         TX errors 0  dropped 8 overruns 0  carrier 0  collisions 0
    20. 

  20. ...略
    21.

解决方法如下，删除配置错误的cni0网卡，删除网卡后会自动重建，然后就好了

    

  1. $ sudo ifconfig cni0 down    
    2. 

  2. $ sudo ip link delete cni0
    3.

控制面板结点Toleration(可选)

默认的，出于安全考虑，集群不会在控制面板结点机上调度(schedule)Pod。如果希望在控制面板结点机上调度Pod，比如用于开发的单机Kubernetes集群，需要运行以下命令

  1. kubectl taint nodes --all node-role.kubernetes.io/master- # 移除所有Labels以node-role.kubernetes.io/master打头的结点的污点(Taints)

实践如下

    

  1. # kubectl get nodes
    2. 

  2. NAME                    STATUS   ROLES                  AGE   VERSION
    3. 

  3. localhost.localdomain   Ready    control-plane,master   63m   v1.20.5
    4. 

  4. # kubectl taint nodes --all node-role.kubernetes.io/master-
    5. 

  5. node/localhost.localdomain untainted
    6.

添加结点到集群

修改新结点的hostname

    

  1. # hostname
    2. 

  2. localhost.localdomain
    3. 

  3. # hostname k8sNode1
    4.

以上通过命令修改主机名仅临时生效，为了避免重启失效，需要编辑/etc/hostname文件，替换默认的localhost.localdomain为目标名称(例中为k8sNode)，如果不添加，后续操作会遇到一下错误

    

  1. [WARNING Hostname]: hostname "k8sNode1" could not be reached
    2. 

  2.     [WARNING Hostname]: hostname "k8sNode1": lookup k8sNode1 on 223.5.5.5:53: read udp 10.118.80.94:33293->223.5.5.5:53: i/o timeout
    3.

修改/ect/hosts配置，增加结点机hostname到结点机IP(例中为 10.118.80.94)的映射，如下

    

  1. # vi /etc/hosts
    2. 

  2. 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
    3. 

  3. ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
    4. 

  4. 10.118.80.94   k8sNode1
    5.

ssh登录目标结点机，切换至root用户(如果非root用户登录)，然后运行控制面板机器上执行kubeadm init命令输出的kubeadm join命令，录入:

  1. kubeadm join --token <token> <control-plane-host>:<control-plane-port> --discovery-token-ca-cert-hash sha256:<hash>

可在控制面板机上通过运行一下命令查看已有且未过期token

  1. # kubeadm token list

如果没有token，可在控制面板机上通过以下命令重新生成token

  1. # kubeadm token create

实践如下

    

  1. # kubeadm join 10.118.80.93:6443 --token ap4vvq.8xxcc0uea7dxbjlo     --discovery-token-ca-cert-hash sha256:c4493c04d789463ecd25c97453611a9dfacb36f4d14d5067464832b9e9c5039a
    2. 

  2. [preflight] Running pre-flight checks
    3. 

  3. [preflight] Reading configuration from the cluster...
    4. 

  4. [preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
    5. 

  5. [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
    6. 

  6. [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
    7. 

  7. [kubelet-start] Starting the kubelet
    8. 

  8. [kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
    9. 

    10. 

  10. This node has joined the cluster:
    11. 

  11. * Certificate signing request was sent to apiserver and a response was received.
    12. 

  12. * The Kubelet was informed of the new secure connection details.
    13. 

    14. 

  14. Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
    15.

控制面板节点机即master机器上查看是否新增结点

    

  1. # kubectl get nodes
    2. 

  2. NAME                    STATUS     ROLES                  AGE     VERSION
    3. 

  3. k8snode1                NotReady   <none>                 74s     v1.20.5
    4. 

  4. localhost.localdomain   Ready      control-plane,master   7h24m   v1.20.5
    5.

如上，新增了一个k8snode1结点

遇到问题总结

问题1：运行]kubeadm join时报错，如下

    

  1. # kubeadm join 10.118.80.93:6443 --token ap4vvq.8xxcc0uea7dxbjlo     --discovery-token-ca-cert-hash sha256:c4493c04d789463ecd25c97453611a9dfacb36f4d14d5067464832b9e9c5039a
    2. 

  2. [preflight] Running pre-flight checks
    3. 

  3. error execution phase preflight: couldn't validate the identity of the API Server: could not find a JWS signature in the cluster-info ConfigMap for token ID "ap4vvq"
    4. 

  4. To see the stack trace of this error execute with --v=5 or higher
    5.

解决方法：

token过期，运行kubeadm token create命令重新生成token

问题1：运行]kubeadm join时报错，如下

    

  1. # kubeadm join 10.118.80.93:6443 --token pa0gxw.4vx2wud1e7e0rzbx  --discovery-token-ca-cert-hash sha256:c4493c04d789463ecd25c97453611a9dfacb36f4d14d5067464832b9e9c5039a
    2. 

  2. [preflight] Running pre-flight checks
    3. 

  3. error execution phase preflight: couldn't validate the identity of the API Server: cluster CA found in cluster-info ConfigMap is invalid: none of the public keys "sha256:8e2f94e2f4f1b66c45d941c0a7f72e328c242346360751b5c1cf88f437ab854f" are pinned
    4. 

  4. To see the stack trace of this error execute with --v=5 or higher
    5.

解决方法：

discovery-token-ca-cert-hash失效，运行以下命令，重新获取discovery-token-ca-cert-hash值

    

  1. # openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | openssl dgst -sha256 -hex | sed 's/^.* //'
    2. 

  2. 8e2f94e2f4f1b66c45d941c0a7f72e328c242346360751b5c1cf88f437ab854f
    3.

使用输出的hash值

  1. --discovery-token-ca-cert-hash sha256:8e2f94e2f4f1b66c45d941c0a7f72e328c242346360751b5c1cf88f437ab854f

问题2： cni config uninitialized错误问题

通过k8s自带UI查看新加入结点状态为KubeletNotReady，提示信息如下，

  1. [container runtime status check may not have completed yet, PLEG is not healthy: pleg has yet to be successful, runtime network not ready: NetworkReady=false reason:NetworkPluginNotReady message:docker: network plugin is not ready: cni config uninitialized, CSINode is not yet initialized, missing node capacity for resources: ephemeral-storage]

解决方法： 重新安装CNI网络插件(实践时采用了虚拟机，可能是因为当时使用的快照没包含网络插件)，然后重新清理结点，最后再重新加入结点

    

  1. # CNI_VERSION="v0.8.2"
    2. 

  2. # mkdir -p /opt/cni/bin
    3. 

  3. # curl -L "https://github.com/containernetworking/plugins/releases/download/${CNI_VERSION}/cni-plugins-linux-amd64-${CNI_VERSION}.tgz" | sudo tar -C /opt/cni/bin -xz
    4.

清理

如果在集群中使用一次性服务器进行测试，则可以直接关闭这些服务器，不需要进行进一步的清理。可以使用kubectl config delete cluster删除对集群的本地引用（笔者未试过）。

但是，如果您想更干净地清理集群，则应该首先清空结点数据，确保节点数据被清空，然后再删除结点

移除结点

控制面板结点机上的操作

先在控制面板结点机上运行以下命令，告诉控制面板结点机器强制删除待删除结点数据

  1. kubectl drain <node name> --delete-emptydir-data --force --ignore-daemonsets

实践如下：

    

  1. # kubectl get nodes
    2. 

  2. NAME                    STATUS   ROLES                  AGE   VERSION
    3. 

  3. k8snode1                Ready    <none>                 82m   v1.20.5
    4. 

  4. localhost.localdomain   Ready    control-plane,master   24h   v1.20.5
    5. 

  5. # kubectl drain k8snode1 --delete-emptydir-data --force --ignore-daemonsets
    6. 

  6. node/k8snode1 cordoned
    7. 

  7. WARNING: ignoring DaemonSet-managed Pods: kube-system/kube-flannel-ds-4xqcc, kube-system/kube-proxy-c7qzs
    8. 

  8. evicting pod default/nginx-deployment-64859b8dcc-v5tcl
    9. 

  9. evicting pod default/nginx-deployment-64859b8dcc-qjrld
    10. 

  10. evicting pod default/nginx-deployment-64859b8dcc-rcvc8
    11. 

  11. pod/nginx-deployment-64859b8dcc-rcvc8 evicted
    12. 

  12. pod/nginx-deployment-64859b8dcc-qjrld evicted
    13. 

  13. pod/nginx-deployment-64859b8dcc-v5tcl evicted
    14. 

  14. node/k8snode1 evicted
    15. 

  15. # kubectl get nodes
    16. 

  16. NAME                    STATUS   ROLES                  AGE   VERSION
    17. 

  17. localhost.localdomain   Ready    control-plane,master   24h   v1.20.5
    18.

目标结点机上的操作

登录到目标结点机上，执行以下命令

  1. # kubeadm reset

上述命令不会重置、清理iptables、IPVS表，如果需要重置iptables还需要手动运行以下命令:

  1. iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

如果需要重置IPVS，必须运行以下命令。

  1. ipvsadm -C

注意：如果无特殊需求，不要去重置网络

删除结点配置文件

    

  1. # rm -rf /etc/cni/net.d
    2. 

  2. # rm -f $HOME/.kube/config
    3.

控制面板结点机上的操作

通过执行命令删除结点kubectl delete node <node name>

    

  1. ###删除未删除的pod
    2. 

  2. # kubectl delete pod kube-flannel-ds-4xqcc -n kube-system --force
    3. 

  3. # kubectl delete pod kube-proxy-c7qzs -n kube-system --force
    4. 

  4. # kubectl delete node k8snode1
    5. 

  5. node "k8snode1" deleted
    6.

删除后，如果需要重新加入结点，可通过 kubeadm join 携带适当参数运行加入

清理控制面板

可以在控制面板结点机上，使用kubeadm reset 命令。点击查看 kubeadm reset 命令参考

本文转自：https://www.cnblogs.com/shouke/p/15318151.html

上一篇： 怎么正确画出裤子？漫画男生西装裤子画法

下一篇： phpmyadmin怎么创建视图

推荐阅读