多AP无线服务配置
程序员文章站
2022-05-01 18:33:31
...
多AP 无线服务配置
配置方案
The device is running!
<AC6605>sys
Enter system view, return user view with Ctrl+Z.
[AC6605]
[AC6605]sys AC1
################配置DHCP服务
[AC1]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[AC1]ip pool pool1
Info: It is successful to create an IP address pool.
[AC1-ip-pool-pool1]network 192.168.1.0 mask 255.255.255.0
[AC1-ip-pool-pool1]gateway-list 192.168.1.1
[AC1-ip-pool-pool1]dns 114.114.114.114
[AC1-ip-pool-pool1]excluded-ip-address 192.168.1.200 192.168.1.254
[AC1-ip-pool-pool1]q
################配置VLAN1应用DHCP
[AC1]int vlan 1
[AC1-Vlanif1]ip ad 192.168.1.1 24
[AC1-Vlanif1]dhcp select golbal
[AC1-Vlanif1]dis int vlan 1 //检测配置情况 应有物理层链路层两个UP
Vlanif1 current state : UP
Line protocol current state : UP
Last line protocol up time : 2020-04-24 11:28:01 UTC-05:13
Description:HUAWEI, AC Series, Vlanif1 Interface
Route Port,The Maximum Transmit Unit is 1500
Internet Address is 192.168.1.1/24
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc50-0e16
Current system time: 2020-04-24 11:28:51-05:13
Input bandwidth utilization : --
Output bandwidth utilization : --
[AC1-Vlanif1]q
################配置AP与AC之间通信的源接口
[AC1]capwap source interface Vlanif 1
################查看未认证AP
[AC1]dis ap un
Unauthorized AP record:
Total number: 3
--------------------------------------------------------------------------------
AP type: AP3030DN
AP SN: 210235448310A911281F
AP MAC address: 00e0-fc7a-5000
AP IP address: 192.168.1.193
Record time: 2020-04-24 11:29:50
--------------------------------------------------------------------------------
AP type: AP3030DN
AP SN: 210235448310A137993E
AP MAC address: 00e0-fc2e-5450
AP IP address: 192.168.1.74
Record time: 2020-04-24 11:29:49
--------------------------------------------------------------------------------
AP type: AP3030DN
AP SN: 210235448310E5207F63
AP MAC address: 00e0-fca1-6720
AP IP address: 192.168.1.65
Record time: 2020-04-24 11:29:48
--------------------------------------------------------------------------------
################注册AP
[AC1]wlan
[AC1-wlan-view]ap auth-mode no-auth //自动注册AP,选用no-auth认证
Warning: It is insecure to configure none authentication mode.
[AC1-wlan-view]q
[AC1]dis ap all
Info: This operation may take a few seconds. Please wait for a moment.done.
Total AP information:
nor : normal [3]
--------------------------------------------------------------------------------
--------------------
ID MAC Name Group IP Type State S
TA Uptime
--------------------------------------------------------------------------------
--------------------
0 00e0-fc7a-5000 00e0-fc7a-5000 default 192.168.1.193 AP3030DN nor 0
8S
1 00e0-fca1-6720 00e0-fca1-6720 default 192.168.1.65 AP3030DN nor 0
2S
2 00e0-fc2e-5450 00e0-fc2e-5450 default 192.168.1.74 AP3030DN nor 0
1S
--------------------------------------------------------------------------------
--------------------
Total: 3
################建立AP组
[AC1]wlan
[AC1-wlan-view]ap-group name ap-group1 //建立ap-group1的 AP组
Info: This operation may take a few seconds. Please wait for a moment.done.
[AC1-wlan-ap-group-ap-group1]ap-id 1
[AC1-wlan-ap-1]ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it will
clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC1-wlan-ap-1]ap-id 2
[AC1-wlan-ap-2]ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it will
clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC1-wlan-view]ap-id 0
[AC1-wlan-ap-0]ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it will
clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC1-wlan-ap-0]q
[AC1-wlan-view]q
[AC1]dis ap all
Info: This operation may take a few seconds. Please wait for a moment.done.
Total AP information:
nor : normal [3]
--------------------------------------------------------------------------------
----------------------
ID MAC Name Group IP Type State
STA Uptime
--------------------------------------------------------------------------------
----------------------
0 00e0-fc7a-5000 00e0-fc7a-5000 ap-group1 192.168.1.193 AP3030DN nor
0 6S
1 00e0-fca1-6720 00e0-fca1-6720 ap-group1 192.168.1.65 AP3030DN nor
0 1M:6S
2 00e0-fc2e-5450 00e0-fc2e-5450 ap-group1 192.168.1.74 AP3030DN nor
0 31S
--------------------------------------------------------------------------------
----------------------
Total: 3
################WLAN基本业务配置阶段
[AC1]wlan
[AC1-wlan-view]ssid-profile name V1
[AC1-wlan-ssid-prof-V1]ssid wifi
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-ssid-prof-V1]q
[AC1-wlan-view]security-profile name V2
[AC1-wlan-sec-prof-V2]q
[AC1-wlan-view]traffic-profile name V3
[AC1-wlan-traffic-prof-V3]q
################创建VAP模板
[AC1-wlan-view]vap-profile name V
[AC1-wlan-vap-prof-V]forward-mode direct-forward //转发模式
[AC1-wlan-vap-prof-V]service-vlan vlan-id 1
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-vap-prof-V]ssid-profile V1
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-vap-prof-V]security-profile V2
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-vap-prof-V]q
#################配置AP组引用VAP模板
[AC1-wlan-view]ap-group name ap-group1 //AP上射频0和射频1都使用VAP模板V的配置。
[AC1-wlan-ap-group-ap-group1]vap-profile V wlan 1 radio 0
Info: This operation may take a few seconds, please wait...done.
[AC1-wlan-ap-group-ap-group1]vap-profile V wlan 1 radio 1
Info: This operation may take a few seconds, please wait...done.
[AC1-wlan-ap-group-ap-group1]q
[AC1-wlan-view]q
[AC1]q
<AC1>save all
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file has been saved successfully
Note: The configuration file will take effect after being activated
上一篇: 学习笔记——MySQL(1)
下一篇: Visio/project安装问题