欢迎您访问程序员文章站本站旨在为大家提供分享程序员计算机编程知识!
您现在的位置是: 首页

JeecgBoot集成Sharding-JDBC

程序员文章站 2022-03-12 18:35:35
...

1. 环境描述

本次测试基于JeecgBoot 2.4.6,测试代码在Jeecg-boot-module-system中编写。

2. 引入坐标

<dependency>
    <groupId>org.apache.shardingsphere</groupId>
    <artifactId>sharding-jdbc-spring-boot-starter</artifactId>
    <version>4.1.1</version>
</dependency>

3. 配置yml文件

datasource:
    druid:
      stat-view-servlet:
        enabled: true
        loginUsername: admin
        loginPassword: 123456
        allow:
      web-stat-filter:
        enabled: true
    dynamic:
      druid: # 全局druid参数,绝大部分值和默认保持一致。(现已支持的参数如下,不清楚含义不要乱设置)
        # 连接池的配置信息
        # 初始化大小,最小,最大
        initial-size: 5
        min-idle: 5
        maxActive: 20
        # 配置获取连接等待超时的时间
        maxWait: 60000
        # 配置间隔多久才进行一次检测,检测需要关闭的空闲连接,单位是毫秒
        timeBetweenEvictionRunsMillis: 60000
        # 配置一个连接在池中最小生存的时间,单位是毫秒
        minEvictableIdleTimeMillis: 300000
        validationQuery: SELECT 1
        testWhileIdle: true
        testOnBorrow: false
        testOnReturn: false
        # 打开PSCache,并且指定每个连接上PSCache的大小
        poolPreparedStatements: true
        maxPoolPreparedStatementPerConnectionSize: 20
        # 配置监控统计拦截的filters,去掉后监控界面sql无法统计,'wall'用于防火墙
        filters: stat,wall,slf4j
        # 通过connectProperties属性来打开mergeSql功能;慢SQL记录
        connectionProperties: druid.stat.mergeSql\=true;druid.stat.slowSqlMillis\=5000
      primary: master # 设置默认的数据源或者数据源组,默认值即为master
      strict: false   # 严格匹配数据源,默认false. true未匹配到指定数据源时抛异常,false使用默认数据源
      datasource:
        master:
          url: jdbc:mysql://127.0.0.1:3306/jeecg-boot?characterEncoding=UTF-8&useUnicode=true&useSSL=false&tinyInt1isBit=false&allowPublicKeyRetrieval=true&serverTimezone=Asia/Shanghai
          username: root
          password: root
          driver-class-name: com.mysql.cj.jdbc.Driver
          # 多数据源配置
          #multi-datasource1:
          #url: jdbc:mysql://localhost:3306/jeecg-boot2?useUnicode=true&characterEncoding=utf8&autoReconnect=true&zeroDateTimeBehavior=convertToNull&transformedBitIsBoolean=true&allowPublicKeyRetrieval=true&serverTimezone=Asia/Shanghai
          #username: root
          #password: root
          #driver-class-name: com.mysql.cj.jdbc.Driver
            # 指定默认数据源名称
  shardingsphere:
    props:
      sql:
        show: true
    dataSource:
      names: ds0
      ds0:
        type: com.alibaba.druid.pool.DruidDataSource
        driverClassName: com.mysql.cj.jdbc.Driver
        url: jdbc:mysql://127.0.0.1:3306/jeecg-boot?characterEncoding=UTF-8&useUnicode=true&useSSL=false&tinyInt1isBit=false&allowPublicKeyRetrieval=true&serverTimezone=Asia/Shanghai
        username: root
        password: root
    sharding:
      tables:
        sys_log:
          logicTable: sys_log
          actualDataNodes: ds0.sys_log$->{1..2}
          tableStrategy:
            inline:
              shardingColumn: id
              algorithmExpression: sys_log$->{id % 2 + 1}
          keyGenerator:
            type: SNOWFLAKE
            column: id
            worker:
            id: 1

 

注意:在jeecgboot原有数据源的基础上,增加了primary节点,用来设置默认的数据源。

4. 建立数据表

在jeecgboot默认的数据库中,将sys_log表复制两份,分别命名为sys_log1和sys_log2

5. 添加配置类

在config目录下,添加配置类DataSourceConfiguration和DataSourceHealthConfig

其中DataSourceConfiguration.java配置类代码如下:

package org.jeecg.config;
import com.baomidou.dynamic.datasource.DynamicRoutingDataSource;
import com.baomidou.dynamic.datasource.provider.AbstractDataSourceProvider;
import com.baomidou.dynamic.datasource.provider.DynamicDataSourceProvider;
import com.baomidou.dynamic.datasource.spring.boot.autoconfigure.DataSourceProperty;
import com.baomidou.dynamic.datasource.spring.boot.autoconfigure.DynamicDataSourceAutoConfiguration;
import com.baomidou.dynamic.datasource.spring.boot.autoconfigure.DynamicDataSourceProperties;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.boot.SpringBootConfiguration;
import org.springframework.boot.autoconfigure.AutoConfigureBefore;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Lazy;
import org.springframework.context.annotation.Primary;
import javax.annotation.Resource;
import javax.sql.DataSource;
import java.util.Map;
 
@Configuration
@AutoConfigureBefore({DynamicDataSourceAutoConfiguration.class, SpringBootConfiguration.class})
 
public class DataSourceConfiguration {
    /**
     * 分表数据源名称
     */
    public static final String SHARDING_DATA_SOURCE_NAME = "sharding";
    /**
     * 动态数据源配置项
     */
    @Autowired
    private DynamicDataSourceProperties dynamicDataSourceProperties;
 
    @Lazy
    @Resource
    DataSource shardingDataSource;
 
    /**
     * 将shardingDataSource放到了多数据源(dataSourceMap)中
     * 注意有个版本的bug,3.1.1版本 不会进入loadDataSources 方法,这样就一直造成数据源注册失败
     */
    @Bean
    public DynamicDataSourceProvider dynamicDataSourceProvider() {
        Map<String, DataSourceProperty> datasourceMap = dynamicDataSourceProperties.getDatasource();
        return new AbstractDataSourceProvider() {
            @Override
            public Map<String, DataSource> loadDataSources() {
                Map<String, DataSource> dataSourceMap = createDataSourceMap(datasourceMap);
                // 将 shardingjdbc 管理的数据源也交给动态数据源管理
                dataSourceMap.put(SHARDING_DATA_SOURCE_NAME, shardingDataSource);
                return dataSourceMap;
            }
        };
    }
 
    /**
     * 将动态数据源设置为首选的
     * 当spring存在多个数据源时, 自动注入的是首选的对象
     * 设置为主要的数据源之后,就可以支持shardingjdbc原生的配置方式了
     *
     * @return
     */
    @Primary
    @Bean
    public DataSource dataSource(DynamicDataSourceProvider dynamicDataSourceProvider) {
        DynamicRoutingDataSource dataSource = new DynamicRoutingDataSource();
        dataSource.setPrimary(dynamicDataSourceProperties.getPrimary());
        dataSource.setStrict(dynamicDataSourceProperties.getStrict());
        dataSource.setStrategy(dynamicDataSourceProperties.getStrategy());
        dataSource.setProvider(dynamicDataSourceProvider);
        dataSource.setP6spy(dynamicDataSourceProperties.getP6spy());
        dataSource.setSeata(dynamicDataSourceProperties.getSeata());
        return dataSource;
    }
}

 

DataSourceHealthConfig.java配置类代码如下:

package org.jeecg.config;
 
import org.springframework.beans.factory.ObjectProvider;
import org.springframework.beans.factory.annotation.Value;
import org.springframework.boot.actuate.autoconfigure.jdbc.DataSourceHealthContributorAutoConfiguration;
import org.springframework.boot.actuate.health.AbstractHealthIndicator;
import org.springframework.boot.actuate.jdbc.DataSourceHealthIndicator;
import org.springframework.boot.jdbc.metadata.DataSourcePoolMetadataProvider;
import org.springframework.context.annotation.Configuration;
import org.springframework.util.StringUtils;
import javax.sql.DataSource;
import java.util.Map;
 
@Configuration
public class DataSourceHealthConfig extends DataSourceHealthContributorAutoConfiguration {
 
    @Value("${spring.datasource.dbcp2.validation-query:select 1}")
    private String defaultQuery;
 
 
    public DataSourceHealthConfig(Map<String, DataSource> dataSources, ObjectProvider<DataSourcePoolMetadataProvider> metadataProviders) {
        super(dataSources, metadataProviders);
    }
 
    @Override
    protected AbstractHealthIndicator createIndicator(DataSource source) {
        DataSourceHealthIndicator indicator = (DataSourceHealthIndicator) super.createIndicator(source);
        if (!StringUtils.hasText(indicator.getQuery())) {
            indicator.setQuery(defaultQuery);
        }
        return indicator;
    }
}

6. 接口编写

Mapper

package org.jeecg.modules.shardingjdbc.mapper;
 
import com.baomidou.dynamic.datasource.annotation.DS;
import org.apache.ibatis.annotations.Insert;
import org.apache.ibatis.annotations.Mapper;
import org.apache.ibatis.annotations.Param;
import org.apache.ibatis.annotations.Select;
import org.springframework.stereotype.Repository;
 
import java.util.List;
import java.util.Map;
 
/**
 * Created by sunh.
 */
@Mapper
@Repository
public interface SysLogShardingMapper {
 
    /**
     * 插入日志
     * @param type
     * @param content
     * @param operateType
     * @return
     */
 
    @Insert("insert into sys_log(log_type,log_content,operate_type)values( #{type},#{content},#{operateType})")
    int insertLog( @Param("type") int type, @Param("content") String content, @Param("operateType") int operateType);
 
}

 

Service

package org.jeecg.modules.shardingjdbc.service;
 
public interface SysLogShardingService {
    int insertLog( int type, String content, int operateType);
}

 

ServiceImpl

package org.jeecg.modules.shardingjdbc.service.Impl;
 
import com.baomidou.dynamic.datasource.annotation.DS;
import lombok.extern.slf4j.Slf4j;
import org.jeecg.config.DataSourceConfiguration;
import org.jeecg.modules.shardingjdbc.mapper.SysLogShardingDao;
import org.jeecg.modules.shardingjdbc.service.SysLogShardingService;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.stereotype.Service;
 
@Slf4j
@Service
@DS(DataSourceConfiguration.SHARDING_DATA_SOURCE_NAME)
public class SysLogShardingServiceImpl implements SysLogShardingService {
    @Autowired
    private SysLogShardingDao sysLogShardingDao;
 
    @Override
    public int insertLog(int type, String content, int operateType) {
        int affectedRows = sysLogShardingDao.insertLog( type,content, operateType);
        return affectedRows;
    }
}

7. 测试用例

package org.jeecg.modules.shardingjdbc.controller;
import org.jeecg.common.api.vo.Result;
import org.jeecg.modules.shardingjdbc.mapper.SysLogShardingDao;
import org.jeecg.modules.shardingjdbc.service.SysLogShardingService;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.web.bind.annotation.GetMapping;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RestController;

/**
 * 测试sharding-jdbc
 */
@RestController
@RequestMapping("/sys_log")
public class SysLogShardingController {
    @Autowired
    private SysLogShardingService sysLogShardingService;
    @GetMapping("/test1")
    public Result<?> TestMongoDb(){
        for(int i=1;i<20;i++){
            sysLogShardingService.insertLog( i,"jeecgboot",i);
        }
        return Result.OK("存入成功");
    }
}

 

8. 测试结果

JeecgBoot集成Sharding-JDBC
            
    
    博客分类: javajeecg代码生成器快速开发 JeecgBoot集成Sharding-JDBC
            
    
    博客分类: javajeecg代码生成器快速开发

 

本文转载自:https://blog.csdn.net/u013473447/article/details/121951020