搭建k8s集群

程序员文章站 2022-06-12 15:33:06

...

搭建k8s集群

安装虚拟机

在Windows物理机上安装3台CentOS虚拟机
软件：VMware Workstation Pro
镜像：CentOS-7-x86_64-DVD-2003.iso
规划：一个master节点+两个node节点
步骤参考博客，推荐阅读

1.虚拟机引导设置

搭建k8s集群

2.CentOS设置

地区选上海
磁盘设置
查看VMWare配置
查看物理机网关
配置IPv4
IP获取方式从DHCP改为Manual；
然后添加ip地址，注意自定义的ip要和上面NAT模式下的子网ip同个网段；
最后添加DNS服务器，设置为物理机的网关即可，不设置的话安装后无法解析域名。
进入系统

查看网络设置

cat /etc/sysconfig/network-scripts/ifcfg-ens33

测试网络
```
ping www.baidu.com
```
安装必要工具
```
yum install net-tools
yum install vim
```
安装docker：参考官网指引

配置阿里云容器镜像服务的镜像加速器（需要开通阿里云账号）

sudo mkdir -p /etc/docker
sudo tee /etc/docker/daemon.json <<-'EOF'
{
"registry-mirrors": ["https://xxxxxxx.mirror.aliyuncs.com"]
}
EOF
sudo systemctl daemon-reload
sudo systemctl restart docker

设置docker开启启动

systemctl enable docker
usermod -aG docker your_username
reboot

3.通过克隆创建两个node节点

master节点先关机

IP地址改为151

vim /etc/sysconfig/network-scripts/ifcfg-ens33

搭建k8s集群

修改主机名为node1
```
hostnamectl set-hostname node1
```
node2节点同理

通过kubeadm部署k8s

参考博客，推荐阅读

1.环境配置

所有节点执行以下命令

systemctl stop firewalld
systemctl disable firewalld

sed -i 's/enforcing/disabled/' /etc/selinux/config 
setenforce 0

swapoff -a # 临时关闭
sed -ri 's/.*swap.*/#&/' /etc/fstab  #永久关闭

echo \
"192.168.65.150 master
192.168.65.151 node1
192.168.65.152 node2"\
>> /etc/hosts

cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

sysctl --system

ntpdate -u cn.pool.ntp.org

2.安装kubeadm，kubelet和kubectl

所有节点执行以下命令

cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

yum install -y kubelet kubeadm kubectl

systemctl enable kubelet

可以看到安装的kubernetes版本是19.3.0

Installed: kubeadm.x86_64 0:1.19.3-0 kubectl.x86_64 0:1.19.3-0 kubelet.x86_64 0:1.19.3-0
Dependency Installed: conntrack-tools.x86_64 0:1.4.4-7.el7
cri-tools.x86_64 0:1.13.0-0
kubernetes-cni.x86_64 0:0.8.7-0
libnetfilter_cthelper.x86_64 0:1.0.0-11.el7
libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7
libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 socat.x86_64 0:1.7.3.2-2.el7

3.部署master节点

在192.168.65.150上执行以下命令，注意更换address和version

kubeadm init \
--apiserver-advertise-address=192.168.65.150 \
--image-repository registry.aliyuncs.com/google_containers \
--kubernetes-version v1.19.3 \
--service-cidr=10.1.0.0/16 \
--pod-network-cidr=10.244.0.0/16

看到下面的信息表示初始化成功

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.65.150:6443 --token qggque.d86p6jbt8j8sfa83 \
    --discovery-token-ca-cert-hash sha256:c6087fe38da78e9fe20cfa29e7d9a36601acc028c0833e80c4f60f51512cb92d

按照上面的提示执行

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

安装Pod网络插件（CNI）

kubectl apply -f kube-flannel.yml

kube-flannel.yml文件可以从这个链接下载，修改改文件，添加网卡 iface=ens33

containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.10.0-amd64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        - --iface=ens33

具体内容如下

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
  - configMap
  - secret
  - emptyDir
  - hostPath
  allowedHostPaths:
  - pathPrefix: "/etc/cni/net.d"
  - pathPrefix: "/etc/kube-flannel"
  - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: ['NET_ADMIN', 'NET_RAW']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
- apiGroups: ['extensions']
  resources: ['podsecuritypolicies']
  verbs: ['use']
  resourceNames: ['psp.flannel.unprivileged']
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes/status
  verbs:
  - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      hostNetwork: true
      priorityClassName: system-node-critical
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.13.0-rc2
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.13.0-rc2
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        - --iface=ens33
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN", "NET_RAW"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
      - name: run
        hostPath:
          path: /run/flannel
      - name: cni
        hostPath:
          path: /etc/cni/net.d
      - name: flannel-cfg
        configMap:
          name: kube-flannel-cfg

4.部署node节点

拉取镜像

docker pull lizhenliang/flannel:v0.11.0-amd64

node节点加入集群，命令从上面kubeadm init的输出提示复制

kubeadm join 192.168.65.150:6443 --token qggque.d86p6jbt8j8sfa83 \
    --discovery-token-ca-cert-hash sha256:c6087fe38da78e9fe20cfa29e7d9a36601acc028c0833e80c4f60f51512cb92d

看见下面的提示即成功加入

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

5.准备完成

kubectl get pods -n kube-system

[aaa@qq.com manifests]# kubectl get pods -n kube-system
NAME                             READY   STATUS    RESTARTS   AGE
coredns-6d56c8448f-d7pjq         1/1     Running   0          43m
coredns-6d56c8448f-mbbbh         1/1     Running   0          43m
etcd-master                      1/1     Running   0          43m
kube-apiserver-master            1/1     Running   0          43m
kube-controller-manager-master   1/1     Running   0          13m
kube-flannel-ds-7frtd            1/1     Running   1          27m
kube-flannel-ds-nk97s            1/1     Running   0          27m
kube-flannel-ds-wt4bp            1/1     Running   0          32m
kube-proxy-8km29                 1/1     Running   2          27m
kube-proxy-phz9c                 1/1     Running   0          27m
kube-proxy-xxtqp                 1/1     Running   0          43m
kube-scheduler-master            1/1     Running   0          12m

6.测试集群

# 创建nginx容器
kubectl create deployment nginx --image=nginx
# 暴露对外端口
kubectl expose deployment nginx --port=80 --type=NodePort
# 查看nginx是否运行成功 
kubectl get pod,svc

[aaa@qq.com manifests]#  kubectl create deployment nginx --image=nginx
deployment.apps/nginx created
[aaa@qq.com manifests]#  kubectl expose deployment nginx --port=80 --type=NodePort
service/nginx exposed
[aaa@qq.com manifests]#  kubectl get pod,svc
NAME                         READY   STATUS              RESTARTS   AGE
pod/nginx-6799fc88d8-v7pzq   0/1     ContainerCreating   0          13s

NAME                 TYPE        CLUSTER-IP    EXTERNAL-IP   PORT(S)        AGE
service/kubernetes   ClusterIP   10.1.0.1      <none>        443/TCP        47m
service/nginx        NodePort    10.1.220.85   <none>        80:30966/TCP   6s
[aaa@qq.com manifests]#

可以看到Nginx对外服务的端口是30966，在浏览器分别访问：http://192.168.65.150:30966/，http://192.168.65.151:30966/，http://192.168.65.152:30966/，均可以访问到nginx
再测试一下扩容

[aaa@qq.com manifests]# kubectl scale deployment nginx --replicas=3
deployment.apps/nginx scaled
[aaa@qq.com manifests]# kubectl get pods
NAME                     READY   STATUS              RESTARTS   AGE
nginx-6799fc88d8-rdv2f   0/1     ContainerCreating   0          4s
nginx-6799fc88d8-v7pzq   1/1     Running             0          4m49s
nginx-6799fc88d8-w6xbh   0/1     ContainerCreating   0          4s

kubectl get cs 报错

[aaa@qq.com k8s]# kubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS      MESSAGE                                                                                       ERROR
scheduler            Unhealthy   Get "http://127.0.0.1:10251/healthz": dial tcp 127.0.0.1:10251: connect: connection refused   
controller-manager   Unhealthy   Get "http://127.0.0.1:10252/healthz": dial tcp 127.0.0.1:10252: connect: connection refused   
etcd-0               Healthy     {"health":"true"}

解决方法：参考博客，修改master节点配置文件

vim /etc/kubernetes/manifests/kube-controller-manager.yaml
# 注释掉port=0这一行

搭建k8s集群

vim /etc/kubernetes/manifests/kube-scheduler.yaml
# 注释掉port=0这一行

搭建k8s集群

三个节点重启kubelet

systemctl restart kubelet.service

主节点再次执行kubectl get cs

[aaa@qq.com manifests]# kubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}

kubectl get node报错

有节点not ready

[aaa@qq.com k8s]#  kubectl get node
NAME     STATUS     ROLES    AGE     VERSION
master   Ready      master   24m     v1.19.3
node1    NotReady   <none>   7m59s   v1.19.3
node2    Ready      <none>   8m2s    v1.19.3

可能是防火墙的问题，参考博客
在问题节点上执行

systemctl status firewalld 
systemctl stop firewalld
systemctl enable firewalld
systemctl daemon-reload
systemctl restart docker
systemctl restart kubelet

主节点再次执行kubectl get node

[aaa@qq.com manifests]# kubectl get node
NAME     STATUS   ROLES    AGE   VERSION
master   Ready    master   39m   v1.19.3
node1    Ready    <none>   22m   v1.19.3
node2    Ready    <none>   22m   v1.19.3

部署Dashboard

 kubectl apply -f kubernetes-dashboard.yaml

kubernetes-dashboard.yaml 文件内容可以从官方仓库下载，需要做点改动，否则部署后访问会404，参考博客
具体内容如下

# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: v1
kind: Namespace
metadata:
  name: kubernetes-dashboard

---

apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard

---

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 443
      targetPort: 8443
      nodePort: 30000
  selector:
    k8s-app: kubernetes-dashboard
  type: NodePort

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-certs
  namespace: kubernetes-dashboard
type: Opaque

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-csrf
  namespace: kubernetes-dashboard
type: Opaque
data:
  csrf: ""

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-key-holder
  namespace: kubernetes-dashboard
type: Opaque

---

kind: ConfigMap
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-settings
  namespace: kubernetes-dashboard

---

kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
rules:
  # Allow Dashboard to get, update and delete Dashboard exclusive secrets.
  - apiGroups: [""]
    resources: ["secrets"]
    resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs", "kubernetes-dashboard-csrf"]
    verbs: ["get", "update", "delete"]
    # Allow Dashboard to get and update 'kubernetes-dashboard-settings' config map.
  - apiGroups: [""]
    resources: ["configmaps"]
    resourceNames: ["kubernetes-dashboard-settings"]
    verbs: ["get", "update"]
    # Allow Dashboard to get metrics.
  - apiGroups: [""]
    resources: ["services"]
    resourceNames: ["heapster", "dashboard-metrics-scraper"]
    verbs: ["proxy"]
  - apiGroups: [""]
    resources: ["services/proxy"]
    resourceNames: ["heapster", "http:heapster:", "https:heapster:", "dashboard-metrics-scraper", "http:dashboard-metrics-scraper"]
    verbs: ["get"]

---

kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
rules:
  # Allow Metrics Scraper to get metrics from the Metrics server
  - apiGroups: ["metrics.k8s.io"]
    resources: ["pods", "nodes"]
    verbs: ["get", "list", "watch"]

---

apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: kubernetes-dashboard
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kubernetes-dashboard

---

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: kubernetes-dashboard
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kubernetes-dashboard

---

kind: Deployment
apiVersion: apps/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: kubernetes-dashboard
  template:
    metadata:
      labels:
        k8s-app: kubernetes-dashboard
    spec:
      containers:
        - name: kubernetes-dashboard
          image: kubernetesui/dashboard:v2.0.0-beta4
          imagePullPolicy: Always
          ports:
            - containerPort: 8443
              protocol: TCP
          args:
            - --auto-generate-certificates
            - --namespace=kubernetes-dashboard
            # Uncomment the following line to manually specify Kubernetes API server Host
            # If not specified, Dashboard will attempt to auto discover the API server and connect
            # to it. Uncomment only if the default does not work.
            # - --apiserver-host=http://my-address:port
          volumeMounts:
            - name: kubernetes-dashboard-certs
              mountPath: /certs
              # Create on-disk volume to store exec logs
            - mountPath: /tmp
              name: tmp-volume
          livenessProbe:
            httpGet:
              scheme: HTTPS
              path: /
              port: 8443
            initialDelaySeconds: 30
            timeoutSeconds: 30
      volumes:
        - name: kubernetes-dashboard-certs
          secret:
            secretName: kubernetes-dashboard-certs
        - name: tmp-volume
          emptyDir: {}
      serviceAccountName: kubernetes-dashboard
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule

---

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: dashboard-metrics-scraper
  name: dashboard-metrics-scraper
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 8000
      targetPort: 8000
  selector:
    k8s-app: dashboard-metrics-scraper

---

kind: Deployment
apiVersion: apps/v1
metadata:
  labels:
    k8s-app: dashboard-metrics-scraper
  name: dashboard-metrics-scraper
  namespace: kubernetes-dashboard
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: dashboard-metrics-scraper
  template:
    metadata:
      labels:
        k8s-app: dashboard-metrics-scraper
    spec:
      containers:
        - name: dashboard-metrics-scraper
          image: kubernetesui/metrics-scraper:v1.0.1
          ports:
            - containerPort: 8000
              protocol: TCP
          livenessProbe:
            httpGet:
              scheme: HTTP
              path: /
              port: 8000
            initialDelaySeconds: 30
            timeoutSeconds: 30
          volumeMounts:
          - mountPath: /tmp
            name: tmp-volume
      serviceAccountName: kubernetes-dashboard
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
      volumes:
        - name: tmp-volume
          emptyDir: {}

查看暴露的端口

[aaa@qq.com k8s]# kubectl get pods,svc -n kube-system
NAME                                 READY   STATUS    RESTARTS   AGE
pod/coredns-6d56c8448f-d7pjq         1/1     Running   0          75m
pod/coredns-6d56c8448f-mbbbh         1/1     Running   0          75m
pod/etcd-master                      1/1     Running   0          75m
pod/kube-apiserver-master            1/1     Running   0          75m
pod/kube-controller-manager-master   1/1     Running   0          44m
pod/kube-flannel-ds-7frtd            1/1     Running   1          58m
pod/kube-flannel-ds-nk97s            1/1     Running   0          58m
pod/kube-flannel-ds-wt4bp            1/1     Running   0          64m
pod/kube-proxy-8km29                 1/1     Running   2          58m
pod/kube-proxy-phz9c                 1/1     Running   0          58m
pod/kube-proxy-xxtqp                 1/1     Running   0          75m
pod/kube-scheduler-master            1/1     Running   0          44m

NAME               TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
service/kube-dns   ClusterIP   10.1.0.10    <none>        53/UDP,53/TCP,9153/TCP   75m

创建service account并绑定默认cluster-admin管理员集群角色

kubectl create serviceaccount dashboard-admin -n kube-system

kubectl create clusterrolebinding dashboard-admin --clusterrole=cluster-admin --serviceaccount=kube-system:dashboard-admin

kubectl describe secrets -n kube-system $(kubectl -n kube-system get secret | awk '/dashboard-admin/{print $1}')

记住token
浏览器访问https://192.168.65.150:30000/，发现因为证书问题，谷歌浏览器无法访问，而火狐浏览器可以，参考博客
输入token，成功访问
重新安装dashboard

kubectl delete -f kubernetes-dashboard.yaml
kubectl create -f kubernetes-dashboard.yaml

其他踩过的坑

https://blog.csdn.net/woay2008/article/details/93250137
https://blog.csdn.net/weixin_44723434/article/details/94583457
https://*.com/questions/61305498/kubernetes-couldnt-able-to-join-master-node-error-execution-phase-preflight

上一篇： win7下VMware虚拟机安装linux7.2上网配置教程

下一篇： Python金融数据可视化汇总

搭建k8s集群

搭建k8s集群

安装虚拟机

1.虚拟机引导设置

2.CentOS设置

3.通过克隆创建两个node节点

通过kubeadm部署k8s

1.环境配置

2.安装kubeadm，kubelet和kubectl

3.部署master节点

4.部署node节点

5.准备完成

6.测试集群

kubectl get cs 报错

kubectl get node报错

部署Dashboard

其他踩过的坑

Spring源码分析——调试环境搭建（可能是最省事的构建方法）

webpack4+Vue搭建自己的Vue-cli项目过程分享

Win7上搭建Cocos2d-x 3.1.1开发环境

在Windows8上的搭建Python和Django环境

Python学习笔记（一）(基础入门之环境搭建)

详解使用VUE搭建后台管理系统(vue-cli更新至3.0)

在vue中使用express-mock搭建mock服务的方法

Vuex的基本概念、项目搭建以及入坑点

Linux(Centos7)下redis5集群搭建和使用说明详解

Spring boot 入门（一）：快速搭建Spring boot项目