防火墙配置，开启3306端口
程序员文章站
2022-05-28 09:42:53
...
- 查看防火墙配置。
$ iptables -L -n
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8081
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:9080
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:3306
tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:3306
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpts:20000:30000
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 1/sec burst 10
ACCEPT all -f 0.0.0.0/0 0.0.0.0/0 limit: avg 100/sec burst 100
syn-flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
target prot opt source destination
DOCKER all -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain DOCKER (1 references)
target prot opt source destination
ACCEPT tcp -- 0.0.0.0/0 192.168.42.2 tcp dpt:3306
Chain syn-flood (1 references)
target prot opt source destination
RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/sec burst 6
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
2 . 3306端口异常
查看防火墙配置文件
$ cat /etc/sysconfig/iptables修改配置文件
-A INPUT -p tcp -m state --state NEW -m tcp --dport 9080 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 3306 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 3306 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT
重启防火墙配置
$ service iptables restart查看防火墙配置。
$ iptables -L -n
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8081
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:9080
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:3306
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:3306
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpts:20000:30000
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 1/sec burst 10
ACCEPT all -f 0.0.0.0/0 0.0.0.0/0 limit: avg 100/sec burst 100
syn-flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain syn-flood (1 references)
target prot opt source destination
RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/sec burst 6
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
上一篇： Java实现解释器(Interpreter)模式的示例代码
下一篇： ant详解